For the high luminosity upgrade of the LHC at CERN, ATLAS is considering the
addition of a High Granularity Timing Detector (HGTD) in front of the end cap
and forward calorimeters at |z| = 3.5 m and covering the region 2.4 < {\eta} <
4 to help reducing the effect of pile-up. The chosen sensors are arrays of 50
{\mu}m thin Low Gain Avalanche Detectors (LGAD). This paper presents results on
single LGAD sensors with a surface area of 1.3x1.3 mm2 and arrays with 2x2 pads
with a surface area of 2x2 mm^2 or 3x3 mm^2 each and different implant doses of
the p+ multiplication layer. They are obtained from data collected during a
beam test campaign in Autumn 2016 with a pion beam of 120 GeV energy at the
CERN SPS. In addition to several quantities measured inclusively for each pad,
the gain, efficiency and time resolution have been estimated as a function of
the position of the incident particle inside the pad by using a beam telescope
with a position resolution of few {\mu}m. Different methods to measure the time
resolution are compared, yielding consistent results. The sensors with a
surface area of 1.3x1.3 mm^2 have a time resolution of about 40 ps for a gain
of 20 and of about 27 ps for a gain of 50 and fulfill the HGTD requirements.
Larger sensors have, as expected, a degraded time resolution. All sensors show
very good efficiency and time resolution uniformity.