We report highly tunable control of holes in Ge/Si core/shell nanowires (NWs). We demonstrate the ability to create single quantum dots (QDs) of various sizes, with low hole occupation numbers and clearly observable excited states. For the smallest dot size we observe indications of single-hole occupation. Moreover, we create double and triple tunnel-coupled quantum dot arrays. In the double quantum dot configuration we observe Pauli spin blockade (PSB). These results open the way to perform hole spin qubit experiments in these devices.

I summarize our recent calculations on quark stars (QSs), for the purpose of explaining some short gamma-ray bursts characterized by internal plateau in their early X-ray afterglow. According to the present plateau sample, the QS central engine model is demonstrated to more preferred than the original neutron star (NS) one. New QS equation of states (PMQS1, PMQS2, PMQS3) are then proposed, respecting fully the observed burst data and the mass distribution of the Galactic NS-NS systems.

In this contribution, we have made use of the contemporary equation of states (EOSs) for the complete neutron star structure, and confronted them with one particular glitch constrain for the crustal moment of inertia (MOI). We find that with these EOSs, the radii of three millisecond pulsars selected by NICER: PSR J0437-4715, PSR J1614-2230, PSR J0751+1807, are all around 12.5 km. Also, a star with $M \lesssim 1.55 M_{\odot}$ would fulfill the MOI calculation for glitch constrain with the latest neutron superfluidity density, and the glitch crisis might not be present.

For the propose of confronting updated pulsar observations with developed neutron star equation of states (EoSs), we employ four unified EoSs for both the core and the crust, namely BCPM, BSk20, BSk21, Shen-TM1, as well as two non-unified EoSs widely used in the literature, i.e. APR and GM1 EoS, which are commonly matched with the Negele-Vautherin and the Baym-Pethick-Sutherland crust EoS. All the core EoSs satisfy the recent observational constraints of the two massive pulsars whose masses are precisely measured. We show that the NS mass-equatorial radius relations are slightly affected by the smoothness at the core-crust matching interface. Moreover, the uncertainties in the crust EoS and the matching interface bring insignificant changes, even at maximally rotating (Keplerian) configurations. We also find that for all four unified EoSs, rotation can increase the star's gravitational mass up to $18\%-19\%$ and the equatorial radius by $29\%-36\%$, which are consistent with the previous calculations using non-unified EoSs. For stars as heavy as 1.4 M$_{\odot}$, the radius increase is more pronounced, reaching $41\%-43\%$, i.e. $5-6$ km. Moreover, by confronting the results using unified EoSs, which give the correct empirical values at saturation density, with two controversial determinations of the radius for the fast rotator 4U 1608-52, we address that a small radius may be better justified for this source.

We use the Spitzer SAGE survey of the Magellanic Clouds to evaluate the relationship between the 8-mic PAH emission, 24-mic hot dust emission, and HII region radiative transfer. We confirm that in the higher-metallicity Large Magellanic Cloud, PAH destruction is sensitive to optically thin conditions in the nebular Lyman continuum: objects identified as optically thin candidates based on nebular ionization structure show 6 times lower median 8-mic surface brightness (0.18 mJy arcsec^-2) than their optically thick counterparts (1.2 mJy arcsec^-2). The 24-mic surface brightness also shows a factor of 3 offset between the two classes of objects (0.13 vs 0.44 mJy arcsec^-2, respectively), which is driven by the association between the very small dust grains and higher density gas found at higher nebular optical depths. In contrast, PAH and dust formation in the low-metallicity Small Magellanic Cloud is strongly inhibited such that we find no variation in either 8-mic or 24-mic emission between our optically thick and thin samples. This is attributable to extremely low PAH and dust production together with high, corrosive UV photon fluxes in this low-metallicity environment. The dust mass surface densities and gas-to-dust ratios determined from dust maps using Herschel HERITAGE survey data support this interpretation.

Hybrid Monte Carlo (MC)/molecular dynamics (MD) simulations are conducted to study the microstructures of nanocrystalline (nc) Cu/Ag alloys with various Ag concentrations. When the Ag concentration is below 50 Ag atoms/nm!, an increase in Ag concentration leads to a gradual growth of monolayer grain boundary (GB) complexions into nanolayer complexions. Above the concentration of 50 Ag atoms/nm!, wetting layers with a bulk crystalline phase are observed. The effects of Ag on mechanical properties and deformation mechanisms of nc Cu/Ag alloys are investigated in MD simulations of uniaxial tension. GB sliding resistance is found to first increase and then decrease with an increase in Ag concentration. Surprisingly, we also find that the dislocation density decreases monotonically with an increase in Ag concentration, which suggests that the grain interiors are softened by the introduction of Ag dopants at GBs. In addition, there is a critical Ag concentration that maximizes flow stress of nc Cu/Ag alloys. The flow stress, GB sliding resistance, and the intragranular dislocation densities become less sensitive to Ag dopants when the grain diameter increases from 5nm to 40nm.

Through the combination of transmission electron microscopy analysis of the deformed microstructure and molecular dynamics computer simulations of the deformation processes, the mechanisms of plastic strain recovery in bulk AgCu eutectic with either incoherent twin or cube-on-cube interfaces between the Ag and Cu layers and a bilayer thickness of 500 nm have been revealed. The character of the incoherent twin interfaces changed uniquely after dynamic compressive loading for samples that exhibited plastic strain recovery and was found to drive the recovery, which is due to dislocation retraction and rearrangement of the interfaces. The magnitude of the recovery decreased with increasing strain as dislocation tangles and dislocation cell structures formed. No change in the orientation relationship was found at cube-on-cube interfaces and these exhibited a lesser amount of plastic strain recovery in the simulations and none experimentally in samples with larger layer thicknesses with predominantly cube-on-cube interfaces. Molecular dynamics computer simulations verified the importance of the change in the incoherent twin interface structure as the driving force for dislocation annihilation at the interfaces and the plastic strain recovery.

In CaFe2As2, superconductivity can be achieved by applying a modest c-axis pressure of several kbar. Here we use scanning tunneling microscopy/spectroscopy (STM/S) to explore the STM tip pressure effect on single crystals of CaFe2As2. When performing STM/S measurements, the tip-sample interaction can be controlled to act repulsive with reduction of the junction resistance, thus to apply a tip pressure on the sample. We find that an incoherent energy gap emerges at the Fermi level in the differential conductance spectrum when the tip pressure is increased. This energy gap is of the similar order of magnitude as the superconducting gap in the chemical doped compound Ca0.4Na0.6Fe2As2 and disappears at the temperature well below that of the bulk magnetic ordering. Moreover, we also observe the rhombic distortion of the As lattice, which agrees with the orthorhombic distortion of the underlying Fe lattice. These findings suggest that the STM tip pressure can induce the local Cooper pairing in the orthorhombic phase of CaFe2As2.

The MAJORANA Collaboration is constructing the MAJORANA Demonstrator, an ultra-low background, 44-kg modular high-purity Ge (HPGe) detector array to search for neutrinoless double-beta decay in Ge-76. The phenomenon of surface micro-discharge induced by high-voltage has been studied in the context of the MAJORANA Demonstrator. This effect can damage the front-end electronics or mimic detector signals. To ensure the correct performance, every high-voltage cable and feedthrough must be capable of supplying HPGe detector operating voltages as high as 5 kV without exhibiting discharge. R&D measurements were carried out to understand the testing system and determine the optimum design configuration of the high-voltage path, including different improvements of the cable layout and feedthrough flange model selection. Every cable and feedthrough to be used at the MAJORANA Demonstrator was characterized and the micro-discharge effects during the MAJORANA Demonstrator commissioning phase were studied. A stable configuration has been achieved, and the cables and connectors can supply HPGe detector operating voltages without exhibiting discharge.

The density and isospin dependences of the nonrelativistic nucleon effective mass ($m^*$) are studied, which is a measure of the nonlocality of the single particle (s.p.) potential. We decouple it further into the so called k-mass ($m^*_k$, i.e., the nonlocality in space) and E-mass ($m^*_E$, i.e., the nonlocality in time). Both masses are determined and compared from the latest versions of the nonrelativistic Brueckner-Hartree Fock (BHF) model and the relativistic Hartree-Fock (RHF) model. The latter are achieved based on the corresponding Schr\"{o}dinger equivalent s.p. potential in a relativistic framework. We demonstrate the origins of different effective masses and discuss also their neutron-proton splitting in the asymmetric matter in different models. We find that the neutron-proton splittings of both the k-mass and the E-mass have the same asymmetry dependences at considered densities, namely $m^*_{k,n} > m^*_{k,p}$ and $m^*_{E,p} > m^*_{E,n}$. However, the resulting splittings of nucleon effective masses could have different asymmetry dependences in the two models, because they could be dominated either by that of the k-mass (then we have $m^*_n > m^*_p$ in the BHF model) or by that of the E-mass (then we have $m^*_p > m^*_n$ in the RHF model).

Minimizing time delays in manufacturing vaccines appropriate to rapidly mutating viruses is the key step for improving vaccine effectiveness. The vaccine for the H3N2 flu type has failed for the last two years (~ 15% effective). Here we summarize the state of the predictive art and report the most current results for H3N2 flu vaccine design. Using a 2006 model of dimensional reduction of viral mutational complexity, we show that this model can reduce vaccine time delays by a year or more in some cases.

Detailed structures of the Vela pulsar (PSR B0833-45, with a period of $89.33$ milliseconds) are predicted by adopting a recently-constructed unified treatment of all parts of neutron stars: the outer crust, the inner crust and the core based on modern microscopic Brueckner-Hartree-Fock calculations. To take the pulsar mass ranging from $1.0M_{\odot}$ to $2.0M_{\odot}$, we calculate the central density, the core/crust radii, the core/crust mass, the core/crustal thickness, the moment of inertia, and the crustal moment of inertia. Among them, the crustal moment of inertia could be effectively constrained from the accumulated glitch observations, which has been a great debate recently, known as "glitch crisis". Namely, superfluid neutrons contained in the inner crust, which are regarded as the origin of the glitch in the standard two-component model, could be largely entrained in the nuclei lattices, then there may not be enough superfluid neutrons ($\sim 4/5$ less than the previous value) to trigger the large glitches ($\Delta \nu/\nu_0 \sim 10^{-6}$) in the Vela pulsar. We then provide the first analysis of the crisis based on the microscopic basis, by confronting the glitch observations with the theoretical calculations for the crustal moment of inertia. We find that despite some recent opposition to the crisis argument, the glitch crisis is still present, which means that besides the crust superfluid neutrons, core neutrons might be necessary for explaining the large glitches of the Vela pulsar.

We develop our previous study of the transition to deconfined quark phase in neutron stars, including the interaction in the quark equation of state to the leading order in the perturbative expansion within the confinement density-dependent mass model. Using the Gibbs conditions the hadron-quark mixed phase is constructed matching the latter with the hadron equation of state derived from the microscopic Brueckner-Hartree-Fock approximation. The influence of quark interaction parameters on threshold properties and phase diagram of dense neutron star matter are discussed in detail. We find that the leading-order quark interaction expands the density range of the mixed phase, pushing forward the disappearance of the hadron phase. Moreover, since the equation of state could turn out to be stiffer, a high-mass hybrid star is possible with mixed-phase core with typical parameter sets.

We extend the quark mean-field (QMF) model to strangeness freedom to study the properties of hyperons ($\Lambda,\Sigma,\Xi$) in infinite baryon matter and neutron star properties. The baryon-scalar meson couplings in the QMF model are determined self-consistently from the quark level, where the quark confinement is taken into account in terms of a scalar-vector harmonic oscillator potential. The strength of such confinement potential for $u,d$ quarks is constrained by the properties of finite nuclei, while the one for $s$ quark is limited by the properties of nuclei with a $\Lambda$ hyperon. These two strengths are not same, which represents the SU(3) symmetry breaking effectively in the QMF model. Also, we use an enhanced $\Sigma$ coupling with the vector meson, and both $\Sigma$ and $\Xi$ hyperon potentials can be properly described in the model. The effects of the SU(3) symmetry breaking on the neutron star structures are then studied. We find that the SU(3) breaking shifts earlier the hyperon onset density and makes hyperons more abundant in the star, in comparisons with the results of the SU(3) symmetry case. However, it does not affect much the star's maximum mass. The maximum masses are found to be $1.62 M_{\odot}$ with hyperons and $1.88 M_{\odot}$ without hyperons. The present neutron star model is shown to have limitations on explaining the recently measured heavy pulsar.

We take a new approach to determine the scale parameter $r_0$, the physical masses of strange and charm quarks through a global fit which incorporates continuum extrapolation, chiral extrapolation and quark mass interpolation to the lattice data. The charmonium and charm-strange meson spectrum are calculated with overlap valence quarks on $2+1$-flavor domain-wall fermion gauge configurations generated by the RBC and UKQCD Collaboration. We use the masses of $D_s$, $D_s^*$ and $J/\psi$ as inputs and obtain $m_c^{\overline{\rm MS}}(2\,{\rm GeV})=1.110(24)\,{\rm GeV}$, $m_s^{\overline{\rm MS}}(2\,{\rm GeV})=0.104(9)\,{\rm GeV}$ and $r_0=0.458(11)\,{\rm fm}$. Subsequently, the hyperfine-splitting of charmonium and $f_{D_s}$ are predicted to be $112(5)\,{\rm MeV}$ and $254(5)\,{\rm MeV}$, respectively.

The study of hypernuclei in the quark mean-field model are extended from single-$\Lambda$ hypernuclei to double-$\Lambda$ hypernuclei as well as $\Xi$ hypernuclei (double strangeness nuclei), with a broken SU(3) symmetry for the quark confinement potential. The strength of the potential for $u,d$ quarks is constrained by the properties of finite nuclei, while the one for $s$ quark is fixed by the single $\Lambda$-nucleus potential at the nuclear saturation density, which has a slightly different value. Compared to our previous work, we find that the introduction of such symmetry breaking improves efficiently the description of the single $\Lambda$ energies for a wide range of mass region, which demonstrates the importance of this effect on the hypernuclei study. Predictions for double-$\Lambda$ hypernuclei and $\Xi$ hypernuclei are then made, confronting with a few available experiential double-$\Lambda$ hypernuclei data and other model calculations. The consistency of our results with the available double-$\Lambda$ hypernucleus is found to be surprisingly good. Also, there is generally a bound state for $\Xi^0$ hypernuclei with both light and heavy core nuclei in our model.

We present a calculation of the strangeness and charmness contents <N|\bar{s}s|N> and <N|\bar{c}c|N> of the nucleon from dynamical lattice QCD with 2+1 flavors. The calculation is performed with overlap valence quarks on 2+1-flavor domain-wall fermion gauge configurations. The configurations are generated by the RBC collaboration on a 24^3*64 lattice with sea quark mass am_l=0.005, am_s=0.04, and inverse lattice spacing a^{-1}=1.73GeV. Both actions have chiral symmetry which is essential in avoiding contamination due to the operator mixing with other flavors. Nucleon propagator and the quark loops are both computed with stochastic grid sources, while low-mode substitution and low-mode averaging methods are used respectively which substantially improve the signal to noise ratio. We obtain the strangeness matrix element f_{T_{s}} = m_s <N|\bar{s}s|N> / M_N = 0.0334(62), and the charmness content f_{T_{c}} = m_c <N|\bar{c}c|N> / M_N = 0.094(31) which is resolved from zero by 3\sigma precision for the first time.

Newly-determined mass of 1.97 $\pm$ 0.04 $M_{\odot}$ for PSR J1614-2230 has been a challenge for the neutron star with a hyperon core (namely hyperon star), since hyperons usually reduce the theoretical maximum mass of the star. In this article, we consider dark matter as another possible constituent in hyperon stars' interior to loose this mass constrain. We take dark matter as self-interacting Fermi gas with certain repulsive interaction among the dark matter particles and non-interaction between dark matter and ordinary matter as is generally assumed. We find that the star maximum mass is sensitive to the particle mass of dark matter, and a high enough star mass larger than 2 $M_{\odot}$ could be achieved when the particle mass is small enough. In this particular model, a strong upper limit 0.64 GeV for dark matter mass is obtained in strongly-interacting dark matter and 0.16 GeV for dark matter mass in weakly-interacting dark matter. Dark matter accumulated around the star could also contribute to the mass measurement, however, such contribution could be safely ignored when the generally used dark matter density is assumed.

Much interest has been devoted to the shape evolution of neutron-rich Si isotopes recently both experimentally and theoretically. We provide our study of $^{28-42}$Si by Skyrme-Hartree-Fock model with BCS approximation for the pairing channel. We use an empirical pairing parameter deduced from the experimental binding energy data for each nuclei and each Skyrme parametrization. The recent highlight of the deformation change from a prolate shape of $^{38}$Si to an oblate shape of $^{42}$Si is confirmed in the present model. We also emphasize the role of tensor force on deformations of neutron-rich $^{30,32}$Si, and discuss its underlying physics.

Hot matter with nucleons can be produced in the inner region of the neutrino-dominated accretion flow in gamma-ray bursts or during the proto-neutron star birth in successful supernova. The composition and equation of state of the matter depend on the dynamic $\beta$ equilibrium under various neutrino opacities. The strong interaction between nucleons may also play an important role. We plan to extend the previous studies by incorporating these two aspects in our model. The modification of the $\beta$-equilibrium condition from neutrino optically thin to thick has been modeled by an equilibrium factor $\chi$ ranging between the neutrino-freely-escaping case and the neutrino-trapped case. We employ the microscopic Brueckner-Hartree-Fock approach extended to the finite temperature regime to study the interacting nucleons. We show that the composition and chemical potentials of the hot nuclear matter for different densities and temperatures at each stage of $\beta$ equilibrium. We also compare our realistic equation of states with those of the free gas model. We find the neutrino opacity and the strong interaction between nucleons are important for the description and should be taken into account in model calculations.

We present a study of the infrared/submm emission of the LMC star forming complex N158-N159-N160. Combining observations from the Spitzer Space Telescope (3.6-70um), the Herschel Space Observatory (100-500um) and LABOCA (870um) allows us to work at the best angular resolution available now for an extragalactic source. We observe a remarkably good correlation between SPIRE and LABOCA emission and resolve the low surface brightnesses emission. We use the Spitzer and Herschel data to perform a resolved Spectral Energy Distribution (SED) modelling of the complex. Using MBB, we derive a global emissivity index beta_c of 1.47. If beta cold is fixed to 1.5, we find an average temperature of 27K. We also apply the Galliano et al. (2011) modelling technique (and amorphous carbon to model carbon dust) to derive maps of the star formation rate, the mean starlight intensity, the fraction of PAHs or the dust mass surface density of the region. We observe that the PAH fraction strongly decreases in the HII regions. This decrease coincides with peaks in the mean radiation field intensity map. The dust surface densities follow the FIR distribution, with a total dust mass of 2.1x10^4 Msolar (2.8 times less than when using graphite grains) in the resolved elements we model. We find a non-negligible amount of dust in the molecular cloud N159 South (showing no massive SF). We also investigate the drivers of the Herschel/PACS and SPIRE submm colours as well as the variations in the gas-to-dust mass ratio (G/D) and the XCO conversion factor in the region N159. We finally model individual regions to analyse variations in the SED shape across the complex and the 870um emission in more details. No measurable submm excess emission at 870um seems to be detected in these regions.

We study tensor and pairing effects on the quadruple deformation of neon isotopes based on a deformed Skyrme-Hartree-Fock model with BCS approximation for the pairing channel. We extend the Skyrme-Hartree-Fock formalism for the description of single- and double-lambda hypernuclei adopting two different hyperon-nucleon interactions. It is found that the interplay of pairing and tensor interactions is crucial to derive the deformations in several neon isotopes. Especially, the shapes of $^{26,30}$Ne are studied in details in comparisons with experimentally observed shapes. Furthermore the deformations of the hypernuclei are compared with the corresponding neon isotopic cores in the presence of tensor force. We find the same shapes with somewhat smaller deformations for single $\Lambda$-hypernuclei compared with their core deformations. It is also pointed out that the latest version of hyperon interaction, the ESC08b model, having a deeper $\Lambda$ potential makes smaller deformations for hypernuclei than those of another NSC97f model.

We performed a combined angle-resolved photoemission spectroscopy and scanning tunneling microscopy study of the electronic structure of electron-doped Ca$_{0.83}$La$_{0.17}$Fe$_2$As$_2$. A surface reconstruction associated with the dimerization of As atoms is observed directly in the real space, as well as the consequent band folding in the momentum space. Besides this band folding effect, the Fermi surface topology of this material is similar to that reported previously for BaFe$_{1.85}$Co$_{0.15}$As$_2$, with $\Gamma$-centred hole pockets quasi-nested to M-centred electron pockets by the antiferromagnetic wave vector. Although no superconducting gap is observed by ARPES possibly due to low superconducting volume fraction, a gap-like density of states depression of $7.7\pm 2.9$ meV is determined by scanning tunneling microscopy.

A direct calculation of the mixed-action parameter $\Delta_{mix}$ with valence overlap fermions on a domain-wall fermion sea is presented. The calculation is performed on four ensembles of the 2+1-flavor domain-wall gauge configurations: $24^3 \times 64$ ($a m_l= 0.005$, $a=0.114\fm$) and $32^3 \times 64$ ($a m_l = 0.004, 0.006, 0.008$, $a=0.085\fm$). For pion masses close to $300\MeV$ we find \hbox{$\Delta_{mix}=0.030(6)\GeV^4$} at $a=0.114\fm$ and $\Delta_{mix}=0.033(12)\GeV^4$ at $a=0.085\fm$. The results are quite independent of the lattice spacing and they are significantly smaller than the results for valence domain-wall fermions on Asqtad sea or those of valence overlap fermions on clover sea. Combining the results extracted from these two ensembles, we get $\Delta_{mix}=0.030(6)(5)\GeV^4$, where the first error is statistical and the second is the systematic error associated with the fitting method.

The calculation of the strangeness and charmness of the nucleon is presented with overlap fermion action on 2+1 flavor domain wall fermion configurations. We adopt stochastic grid sources and the low mode substitution technique to improve the signals of nucleon correlation functions and the loops. The calculation is done on a $24^3\times 64$ lattice with $m_l=0.005$, $m_h=0.04$, and $a^{-1}=1.73\,{\rm GeV}$. We find $ f_{T_{s}} = 0.048(15)$ and $f_{T_{c}} = 0.029(43)$.