In this paper we fit the NuSTAR and XMM-Newton data of three sources: NGC7793~P13, NGC5907~ULX1, and Circinus~ULX5. Our single model contains emission form non-spherical system: neutron star plus accretion disk directed towards observer. We obtained the very good fit with the reduced $\chi^2$ per degree of freedom equal 1.08 for P13, 1.01 for ULX1, and 1.14 for ULX5.The normalization of our model constrains the distance to the source. The resulting distances are $D=3.41^{+0.11}_{-0.10}$, $6.55_{-0.81}^{+0.69}$ and $2.60^{+0.05}_{-0.03}$~Mpc for P13, ULX1 and ULX5 respectively. The distances to P13 and ULX5 are in perfect agreement with previous distance measurements to their host galaxies. Our results confirm that P13, ULX1 and ULX5 may contain central hot neutron star. When the outgoing emission is computed by integration over the emitting surface and successfully fitted to the data, then the resulting model normalization is the direct distance indicator.

The X-ray Integral Field Unit (X-IFU) on board the Advanced Telescope for High-ENergy Astrophysics (Athena) will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5 arc second pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV up to 7 keV. In this paper, we first review the core scientific objectives of Athena, driving the main performance parameters of the X-IFU, namely the spectral resolution, the field of view, the effective area, the count rate capabilities, the instrumental background. We also illustrate the breakthrough potential of the X-IFU for some observatory science goals. Then we briefly describe the X-IFU design as defined at the time of the mission consolidation review concluded in May 2016, and report on its predicted performance. Finally, we discuss some options to improve the instrument performance while not increasing its complexity and resource demands (e.g. count rate capability, spectral resolution). The X-IFU will be provided by an international consortium led by France, The Netherlands and Italy, with further ESA member state contributions from Belgium, Finland, Germany, Poland, Spain, Switzerland and two international partners from the United States and Japan.

The Wide Field Imager (WFI) is one of two instruments for the Advanced Telescope for High-ENergy Astrophysics (Athena). In this paper we summarise three of the many key science objectives for the WFI - the formation and growth of supermassive black holes, non-gravitational heating in clusters of galaxies, and spin measurements of stellar mass black holes - and describe their translation into the science requirements and ultimately instrument requirements. The WFI will be designed to provide excellent point source sensitivity and grasp for performing wide area surveys, surface brightness sensitivity, survey power, and absolute temperature and density calibration for in-depth studies of the outskirts of nearby clusters of galaxies and very good high-count rate capability, throughput, and low pile-up, paired with very good spectral resolution, for detailed explorations of bright Galactic compact objects.

The continuum-fitting method is one of the two most advanced methods of determining the black hole spin in accreting X-ray binary systems. There are, however, still some unresolved issues with the underlying disk models. One of them manifests as an apparent decrease in spin for increasing source luminosity. Here, we perform a few simple tests to establish whether outflows from the disk close to the inner radius can address this problem. We employ four different parametric models to describe the wind and compare these to the apparent decrease in spin with luminosity measured in the sources LMC~X-3 and GRS~1915+105. Wind models in which parameters do not explicitly depend on the accretion rate cannot reproduce the spin measurements. Models with mass accretion rate dependent outflows, however, have spectra that emulate the observed ones. The assumption of a wind thus effectively removes the artifact of spin decrease. This solution is not unique; the same conclusion can be obtained with a truncated inner disk model. To distinguish among valid models, high resolution X-ray data and a realistic description of the Comptonization in the wind will be needed.

We show that the continuum X-ray spectrum of 4U 1630-472 with iron absorption lines can be satisfactorily modeled by the spectrum from an accretion disk atmosphere. We performed full radiative transfer calculations using our code ATM21 to model the emission from an accretion disk surface that is seen at different viewing angles. Computed models are then fitted to the high-resolution X-ray spectra of 4U 1630-472 obtained by {\it Suzaku} satellite. Absorption lines of highly ionized iron originating in a hot accretion-disk atmospheres are important part of the observed line profile, and can be an alternative or complementary explanation to the wind model usually favored for this type of sources. Next, assuming that absorption lines originate from the wind illuminated by X-ray central source in LMXBs, we can put constrains on the wind location only if we know the volume density number of the absorbing material. There are a few derivations of the distance to the wind in X-ray binaries. We show here, that the density number and the wind location agree with the density of an upper disk atmosphere at optical depth of two-thirds, at the same distance from the black hole. This comparison is done assuming optically thick, geometrically thin standard accretion disk model. Nevertheless, it shows that the wind physical conditions are the same as in thermalized disk gas, and we only have to figure out how the wind is blowing?

X-ray polarimetry, sometimes alone, and sometimes coupled to spectral and temporal variability measurements and to imaging, allows a wealth of physical phenomena in astrophysics to be studied. X-ray polarimetry investigates the acceleration process, for example, including those typical of magnetic reconnection in solar flares, but also emission in the strong magnetic fields of neutron stars and white dwarfs. It detects scattering in asymmetric structures such as accretion disks and columns, and in the so-called molecular torus and ionization cones. In addition, it allows fundamental physics in regimes of gravity and of magnetic field intensity not accessible to experiments on the Earth to be probed. Finally, models that describe fundamental interactions (e.g. quantum gravity and the extension of the Standard Model) can be tested. We describe in this paper the X-ray Imaging Polarimetry Explorer (XIPE), proposed in June 2012 to the first ESA call for a small mission with a launch in 2017 but not selected. XIPE is composed of two out of the three existing JET-X telescopes with two Gas Pixel Detectors (GPD) filled with a He-DME mixture at their focus and two additional GPDs filled with pressurized Ar-DME facing the sun. The Minimum Detectable Polarization is 14 % at 1 mCrab in 10E5 s (2-10 keV) and 0.6 % for an X10 class flare. The Half Energy Width, measured at PANTER X-ray test facility (MPE, Germany) with JET-X optics is 24 arcsec. XIPE takes advantage of a low-earth equatorial orbit with Malindi as down-link station and of a Mission Operation Center (MOC) at INPE (Brazil).

This White Paper, submitted to the recent ESA call for science themes to define its future large missions, advocates the need for a transformational leap in our understanding of two key questions in astrophysics: 1) How does ordinary matter assemble into the large scale structures that we see today? 2) How do black holes grow and shape the Universe? Hot gas in clusters, groups and the intergalactic medium dominates the baryonic content of the local Universe. To understand the astrophysical processes responsible for the formation and assembly of these large structures, it is necessary to measure their physical properties and evolution. This requires spatially resolved X-ray spectroscopy with a factor 10 increase in both telescope throughput and spatial resolving power compared to currently planned facilities. Feedback from supermassive black holes is an essential ingredient in this process and in most galaxy evolution models, but it is not well understood. X-ray observations can uniquely reveal the mechanisms launching winds close to black holes and determine the coupling of the energy and matter flows on larger scales. Due to the effects of feedback, a complete understanding of galaxy evolution requires knowledge of the obscured growth of supermassive black holes through cosmic time, out to the redshifts where the first galaxies form. X-ray emission is the most reliable way to reveal accreting black holes, but deep survey speed must improve by a factor ~100 over current facilities to perform a full census into the early Universe. The Advanced Telescope for High Energy Astrophysics (Athena+) mission provides the necessary performance (e.g. angular resolution, spectral resolution, survey grasp) to address these questions and revolutionize our understanding of the Hot and Energetic Universe. These capabilities will also provide a powerful observatory to be used in all areas of astrophysics.

Most of the action in Active Galactic Nuclei (AGN) occurs within a few tens of gravitational radii from the supermassive black hole, where matter in the accretion disk may lose up to almost half of its energy with a copious production of X-rays, emitted via Comptonization of the disk photons by hot electrons in a corona and partly reflected by the accretion disk. Thanks to its large effective area and excellent energy resolution, Athena+ contributions in the understanding of the physics of accretion in AGN will be fundamental - and unique - in many respects. It will allow us to map the disk-corona system - which is crucial to understand the mechanism of energy extraction and the relation of the corona with winds and jets - by studying the time lags between reflected and primary photons. These lags have been recently discovered by XMM-Newton, but only Athena+ will have the sensitivity required to fully exploit this technique. Athena+ will also be able e.g. to determine robustly the spin of the black hole in nearby sources (and to extend these measurements beyond the local Universe), to establish the nature of the soft X-ray components, and to map the circumnuclear matter within the AGN inner parsec with unprecedented details.

White dwarfs, neutron stars and stellar mass black holes are key laboratories to study matter in most extreme conditions of gravity and magnetic field. The unprecedented effective area of Athena+ will allow us to advance our understanding of emission mechanisms and accretion physics over a wide range of mass accretion rates, starting from lower and sub-luminous quiescent X-ray binaries up to super-Eddington ultra-luminous sources. Athena+ will measure stellar black hole spins in a much higher number of binaries than achievable now, opening the possibility to study how spin varies with black hole history. The high throughput and energy resolution of the X-IFU will be instrumental in establishing how disc wind properties depend on accretion state, in determining wind launching mechanism and in quantifying the impact of the wind induced mass loss on binary evolution and environment. Triggers and high quality optical and radio data originating from large wide field contemporaneous instruments will provide essential complementary information on jet launching mechanisms and on the physics of rotation powered pulsars, for instance. In addition, Athena+ will furnish multiple, independent measurements of the neutron star mass/radius relation in a wide range of environments and conditions so as to constrain the debated equation of state.

We report on a scheme for incorporating vertical radiative energy transport into a fully relativistic, Kerr-metric model of optically thick, advective, transonic alpha disks. Our code couples the radial and vertical equations of the accretion disk. The flux was computed in the diffusion approximation, and convection is included in the mixing-length approximation. We present the detailed structure of this "two-dimensional" slim-disk model for alpha=0.01. We then calculated the emergent spectra integrated over the disk surface. The values of surface density, radial velocity, and the photospheric height for these models differ by 20%-30% from those obtained in the polytropic, height-averaged slim disk model considered previously. However, the emission profiles and the resulting spectra are quite similar for both types of models. The effective optical depth of the slim disk becomes lower than unity for high values of the alpha parameter and for high accretion rates.

The "radiation inner edge" of an accretion disk is defined as the inner boundary of the region from which most of the luminosity emerges. Similarly, the "reflection edge" is the smallest radius capable of producing a significant X-ray reflection of the fluorescent iron line. For black hole accretion disks with very sub-Eddington luminosities these and all other "inner edges" locate at ISCO. Thus, in this case, one may rightly consider ISCO as the unique inner edge of the black hole accretion disk. However, even for moderate luminosities, there is no such unique inner edge as differently defined edges locate at different places. Several of them are significantly closer to the black hole than ISCO. The differences grow with the increasing luminosity. For nearly Eddington luminosities, they are so huge that the notion of the inner edge losses all practical significance.

We present a method that allows us to estimate the distance from the continuum source located in the center of AGN to the highly ionized gas called warm absorber. We compute a set of constant total pressure photoionization models compatible with the warm absorber conditions, where a metal-rich gas is irradiated by a continuum in the form of a double power-law. The first power-law is hard up to 100 keV and represents a radiation from an X-ray source, while the second power-law extends downwards from several eVs and illustrates a radiation from an accretion disk. When the ionized continuum is dominated by the soft component, the warm absorber is heated by free-free absorption, instead of Comptonization, and the transmitted spectra show different absorption line characteristics for different values of the hydrogen number density at the cloud illuminated surface. This fact results in the possibility of deriving the number density at the cloud illuminated side from observations and hence the distance to the warm absorber.

We present a full set of model atmosphere equations for the accretion disk around a supermassive black hole irradiated by hard X-ray lamp of power-law spectral distribution. Model equations allow for multiple Compton scattering of radiation on free electrons, and for large relative photon-electron energy exchange at the time of scattering. We present spectra in specific intensities integrated over the disk surface. Theoretical outgoing intensity spectra show soft X-ray excess below 1 keV, and distinct K_alpha and K_beta fluorescent lines of iron. We demonstrate the existence of the Compton Shoulder and claim that it can contribute to the asymmetry and equivalent widths of some observed Fe K_alpha lines in AGN. Our models exhibit the effect of limb-brightening in reflected X-rays.