• We develop a new asymptotic model of the dynamic interaction between an elastic structure and a system of gyroscopic spinners that make the overall multi-structure chiral. An important result is the derivation and analysis of effective chiral boundary conditions describing the interaction between an elastic beam and a gyroscopic spinner. These conditions are applied to the analysis of waves in systems of beams connected by gyroscopic spinners. A new asymptotic and physical interpretation of the notion of a Rayleigh gyrobeam is also presented. The theoretical findings are accompanied by illustrative numerical examples and simulations.
  • We demonstrate a new method of achieving topologically protected states in a discrete hexagonal lattice by attaching gyroscopic spinners, which bring chirality to the system. Dispersive features of this medium are investigated in detail and, by tuning the parameters of the spinners, it is shown one can manipulate the locations of stop-bands and Dirac points. We show that in proximity of such points, uni-directional interfacial waveforms can be created in an inhomogeneous lattice and the direction of such waveforms can be controlled. The effect of inserting additional internal links into the system, which is thus transformed in a heterogeneous triangular lattice, is also investigated. This work introduces a new perspective in the design of periodic media possessing non-trivial topological features.
  • We analyse the propagation of pressure waves within a fluid filled with a three-dimensional array of rigid coated spheres (shells). We first draw band diagrams for corresponding Floquet-Bloch waves. We then dig a channel terminated by a cavity within each rigid shell and observe the appearance of a low frequency stop band. The underlying mechanism is that each holey shell now acts as a Helmholtz resonator supporting a low frequency localized mode: Upon resonance, pressure waves propagate with fast oscillations in the thin water channel drilled in each shell and are localized in each fluid filled inner cavity. The array of fluid filled shells is approximated by a simple mechanical model of springs and masses allowing for asymptotic estimates of the low frequency stop band. We finally propose a realistic design of periodic macrocell with a large defect surrounded by 26 resonators connected by thin straight rigid wires, which supports a localized mode in the low frequency stop band.
  • For highly perforated domains the paper addresses a novel approach to study mixed boundary value problems for the equations of linear elasticity in the framework of meso-scale approximations. There are no assumptions of periodicity involved in the description of the geometry of the domain. The size of the perforations is small compared to the minimal separation between neighbouring defects and here we discuss a class of problems in perforated domains, which are not covered by the homogenisation approximations. The meso-scale approximations presented here are uniform. Explicit asymptotic formulae are supplied with the remainder estimates.
  • We address an important issue of a dynamic homogenisation in vector elasticity for a doubly periodic mass-spring elastic lattice. The notion of logarithmically growing resonant waves is used in a complete analysis of star-shaped wave forms induced by an oscillating point force. We note that the dispersion surfaces for Floquet-Bloch waves in an elastic lattice main contain critical points of the saddle type. Based on the local quadratic approximations of the frequency, as a function of wave vector components, we deduce properties of a transient asymptotic solution as the contribution of the point source to the wave form. In this way, we describe local Green's functions as localized wave forms corresponding to the resonant frequency. The peculiarity of the problem lies in the fact that, at the same resonant frequency, the Taylor quadratic approximations for different groups of the resonant points are different, and hence we deal with different local Green's functions. Thus, there is no uniformly defined homogenisation procedure for a given resonant frequency. Instead, the continuous approximation of the wave field can be obtained through the asymptotic analysis of the lattice Green's functions.
  • The focus of the article is on analysis of skew-symmetric weight matrix functions for interfacial cracks in two dimensional anisotropic solids. It is shown that the Stroh formalism proves to be an efficient approach to this challenging task. Conventionally, the weight functions, both symmetric and skew-symmetric, can be identified as a non-trivial singular solutions of the homogeneous boundary value problem for a solid with a crack. For a semi-infinite crack, the problem can be reduced to solving a matrix Wiener-Hopf functional equation. Instead, the Stroh matrix representation of displacements and tractions, combined with a Riemann-Hilbert formulation, is used to obtain an algebraic eigenvalue problem, that is solved in a closed form. The proposed general method is applied to the case of a quasi-static semi-infinite crack propagation between two dissimilar orthotropic media: explicit expressions for the weight matrix functions are evaluated and then used in the computation of complex stress intensity factor corresponding to an asymmetric load acting on the crack faces.
  • We model and derive the solution for the problem of a Mode I semi-infinite crack propagating in a discrete triangular lattice with bonds having a contrast in stiffness in the principal lattice directions. The corresponding Green's kernel is found and from this wave dispersion dependencies are obtained in explicit form. An equation of the Wiener-Hopf type is also derived and solved along the crack face, in order to compute the stress intensity factor for the semi-infinite crack. The crack stability is analysed via the evaluation of the energy release rate for different contrasts in stiffness of the bonds.
  • The paper addresses the problem of a Mode III interfacial crack advancing quasi-statically in a heterogeneous composite material, that is a two-phase material containing elastic inclusions, both soft and stiff, and defects, such as microcracks, rigid line inclusions and voids. It is assumed that the bonding between dissimilar elastic materials is weak so that the interface is a preferential path for the crack. The perturbation analysis is made possible by means of the fundamental solutions (symmetric and skew-symmetric weight functions) derived in Piccolroaz et al. (2009). We derive the dipole matrices of the defects in question and use the corresponding dipole fields to evaluate effective tractions along the crack faces and interface to describe the interaction between the main interfacial crack and the defects. For a stable propagation of the crack, the perturbation of the stress intensity factor induced by the defects is then balanced by the elongation of the crack along the interface, thus giving an explicit asymptotic formula for the calculation of the crack advance. The method is general and applicable to interfacial cracks with general distributed loading on the crack faces, taking into account possible asymmetry in the boundary conditions. The analytical results are used to analyse the shielding and amplification effects of various types of defects in different configurations. Numerical computations based on the explicit analytical formulae allows for the analysis of crack propagation and arrest.
  • The interaction of an interfacial crack with small impurities is analysed on the basis of an asymptotic formula derived by the authors. The interaction between the main crack and the defects (e.g. small cracks or inclusions) is described asymptotically by analysing the dipole fields and the corresponding dipole matrices of the defects in question. The method is generic, and it serves interfacial cracks with general distributed loading on the crack faces, taking into account possible asymmetry in the boundary conditions, and in a particular configuration for a crack in a homogeneous medium results agree with those obtained earlier by Gong (1995). Shielding and amplification effects of the defects on the propagation of the main crack along the interface are investigated. Numerical computations based on the explicit analytical formulae show potential applications in the design of composite and fiber reinforced materials.
  • We describe a method of asymptotic approximations to solutions of mixed boundary value problems for the Laplacian in a three-dimensional domain with many perforations of arbitrary shape, with the Neumann boundary conditions being prescribed on the surfaces of small voids. The only assumption made on the geometry is that the diameter of a void is assumed to be smaller compared to the distance to the nearest neighbour. The asymptotic approximation, obtained here, involves a linear combination of dipole fields constructed for individual voids, with the coefficients, which are determined by solving a linear algebraic system. We prove the solvability of this system and derive an estimate for its solution. The energy estimate is obtained for the remainder term of the asymptotic approximation.
  • The uniform asymptotic approximation of Green's kernel for the transmission problem of antiplane shear is obtained for domains with small inclusions. The remainder estimates are provided. Numerical simulations are presented to illustrate the effectiveness of the approach.