• This paper presents a physical layer network coding (PNC) approach for network MIMO (N-MIMO) systems to release the heavy burden of backhaul load. The proposed PNC approach is applied for uplink scenario in binary systems, and the design guideline serves multiple mobile terminals (MTs) and guarantees unambiguous recovery of the message from each MT. We present a novel PNC design criterion first based on binary matrix theories, followed by an adaptive optimal mapping selection algorithm based on the proposed design criterion. In order to reduce the real-time computational complexity, a two-stage search algorithm for the optimal binary PNC mapping matrix is developed. Numerical results show that the proposed scheme achieves lower outage probability with reduced backhaul load compared to practical CoMP schemes which quantize the estimated symbols from a log-likelihood ratio (LLR) based multiuser detector into binary bits at each access point (AP).
  • Cell-free massive multiple-input multiple-output (MIMO) is a potential key technology for fifth generation wireless communication networks. A mixed quality-of-service (QoS) problem is investigated in the uplink of a cell-free massive MIMO system where the minimum rate of non-real time users is maximized with per user power constraints whilst the rate of the real-time users (RTUs) meet their target rates. First an approximated uplink user rate is derived based on available channel statistics. Next, the original mixed QoS problem is formulated in terms of receiver filter coefficients and user power allocations which can iteratively be solved through two sub-problems, namely, receiver filter coefficient design and power allocation, which are dealt with using a generalized eigenvalue problem and geometric programming, respectively. Numerical results show that with the proposed scheme, while the rates of RTUs meet the QoS constraints, the $90\%$-likely throughput improves significantly, compared to a simple benchmark scheme.
  • The problem of user scheduling with reduced overhead of channel estimation in the uplink of Massive multiple-input multiple-output (MIMO) systems has been considered. A geometry-based stochastic channel model (GSCM), called the COST 2100 channel model has been used for realistic analysis of channels. In this paper, we propose a new user selection algorithm based on knowledge of the geometry of the service area and location of clusters, without having full channel state information (CSI) at the base station (BS). The multi-user link correlation in the GSCMs arises from the common clusters in the area. The throughput depends on the position of clusters in the GSCMs and users in the system. Simulation results show that although the BS does not require the channel information of all users, by the proposed geometry-based user scheduling algorithm the sum-rate of the system is only slightly less than the well-known greedy weight clique scheme. Finally, the robustness of the proposed algorithm to the inaccuracy of cluster localization is verified by the simulation results.
  • This paper considers a Massive multiple-input multiple-output (MIMO) network, where the base station (BS) with a large number of antennas communicates with a smaller number of users. The signals are transmitted using frequency division duplex (FDD) mode. The problem of user scheduling with reduced overhead of channel estimation in the uplink of Massive MIMO systems has been investigated. We consider the COST 2100 channel model. In this paper, we first propose a new user selection algorithm based on knowledge of the geometry of the service area and of location of clusters, without having full channel state information (CSI) at the BS. We then show that the correlation in geometry-based stochastic channel models (GSCMs) arises from the common clusters in the area. In addition, exploiting the closed-form Cramer-Rao lower bounds (CRLB)s, the analysis for the robustness of the proposed scheme to cluster position errors is presented. It is shown by analysing the capacity upper-bound that the capacity strongly depends on the position of clusters in the GSCMs and users in the system. Simulation results show that although the BS receiver does not require the channel information of all users, by the proposed geometry-based user scheduling (GUS) algorithm the sum-rate of the system is only slightly less than the well-known greedy weight clique (GWC) scheme \cite{SUSGoldsmithGlobcom,ITC09_Userselection_GWC}. {Finally, the robustness of the proposed algorithm to cluster localization is verified by the simulation results.
  • In this paper, we consider the max-min signal-to-interference plus noise ratio (SINR) problem for the uplink transmission of a cell-free Massive multiple-input multiple-output (MIMO) system. Assuming that the central processing unit (CPU) and the users exploit only the knowledge of the channel statistics, we first derive a closed-form expression for uplink rate. In particular, we enhance (or maximize) user fairness by solving the max-min optimization problem for user rate, by power allocation and choice of receiver coefficients, where the minimum uplink rate of the users is maximized with available transmit power at the particular user. Based on the derived closed-form expression for the uplink rate, we formulate the original user max-min problem to design the optimal receiver coefficients and user power allocations. However, this max-min SINR problem is not jointly convex in terms of design variables and therefore we decompose this original problem into two sub-problems, namely, receiver coefficient design and user power allocation. By iteratively solving these sub-problems, we develop an iterative algorithm to obtain the optimal receiver coefficient and user power allocations. In particular, the receiver coefficients design for a fixed user power allocation is formulated as generalized eigenvalue problem whereas a geometric programming (GP) approach is utilized to solve the power allocation problem for a given set of receiver coefficients. Numerical results confirm a three-fold increase in system rate over existing schemes in the literature.
  • We consider a cell-free Massive multiple-input multiple-output (MIMO) system and investigate the system performance for the case when the quantized version of the estimated channel and the quantized received signal are available at the central processing unit (CPU), and the case when only the quantized version of the combined signal with maximum ratio combining (MRC) detector is available at the CPU. Next, we study the max-min optimization problem, where the minimum user uplink rate is maximized with backhaul capacity constraints. To deal with the max-min non-convex problem, we propose to decompose the original problem into two sub-problems. Based on these sub-problems, we develop an iterative scheme which solves the original max-min user uplink rate. Moreover, we present a user assignment algorithm to further improve the performance of cell-free Massive MIMO with limited backhaul links.
  • Physical layer network coding (PNC) has been studied to serve wireless network MIMO systems with much lower backhaul load than approaches such as Cloud Radio Access Network (Cloud-RAN) and coordinated multipoint (CoMP). In this paper, we present a design guideline of engineering-applicable PNC to fulfil the request of high user densities in 5G wireless RAN infrastructure. Unlike computer-and-forward and PNC schemes designed for two-way relay channels, the proposed PNC is designed for uplink of network MIMO systems. We show that the proposed design criterion guarantee that 1) the whole system operates over binary system; 2) each access point can choose singular PNC function to overcome all fade states; 3) the destination can unambiguously recover all source messages while the overall backhaul load remains at the lowest level regardless of which digital mapping is used. We develop a two-stage search algorithm to identify the optimum PNC mapping functions with a practical selection approach which greatly reduces the real-time computation complexity is presented with a small performance loss. Numerical results show that the proposed scheme achieves low bit error rate with reduced backhaul load.
  • In this letter, we propose a robust beamforming design for non-orthogonal multiple access (NOMA) based multiple-input single-output (MISO) downlink systems. In particular, the robust power minimization problem is studied with imperfect channel state information (CSI), where the beamformers are designed by incorporating norm-bounded channel uncertainties to provide the required quality of service at each user. This robust scheme is developed based on the worst-case performance optimization framework. In terms of beamforming vectors, the original robust design is not convex and therefore, the robust beamformers cannot be obtained directly. To circumvent this non-convex issue, the original intractable problem is reformulated into a convex problem, where the non-convex constraint is converted into a linear matrix inequality (LMI) by exploiting S-Procedure. Finally, simulation results are provided to demonstrate the effectiveness of the proposed robust design.
  • In order to effetively suppress intersymbol interference (ISI) at low complexity, we propose in this paper an approximate maximum likelihood (ML) decision feedback block equalizer (A-ML-DFBE) for doubly selective (frequency-selective, time-selective) fading channels. The proposed equalizer design makes efficient use of the special time-domain representation of the multipath channels through a matched filter, a sliding window, a Gaussian approximation, and a decision feedback. The A-ML-DFBE has the following features: 1) It achieves performance close to maximum likelihood sequence estimation (MLSE), and significantly outperforms the minimum mean square error (MMSE) based detectors; 2) It has substantially lower complexity than the conventional equalizers; 3) It easily realizes the complexity and performance tradeoff by adjusting the length of the sliding window; 4) It has a simple and fixed-length feedback filter. The symbol error rate (SER) is derived to characterize the behaviour of the A-ML-DFBE, and it can also be used to find the key parameters of the proposed equalizer. In addition, we further prove that the A-ML-DFBE obtains full multipath diversity.