A large Time Projection Chamber is the main device for tracking and
charged-particle identification in the ALICE experiment at the CERN LHC. After
the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at
an interaction rate of about 50 kHz, which is about a factor of 50 above the
present readout rate of the TPC. This will result in a significant improvement
on the sensitivity to rare probes that are considered key observables to
characterize the QCD matter created in such collisions. In order to make full
use of this luminosity, the currently used gated Multi-Wire Proportional
Chambers will be replaced by continuously operated readout detectors employing
Gas Electron Multiplier technology, while retaining the performance in terms of
particle identification via the measurement of the specific energy loss by
ionization d$E$/d$x$. A full-size readout chamber prototype was assembled in
2014 featuring a stack of four GEM foils as an amplification stage. The
d$E$/d$x$ resolution of the prototype, evaluated in a test beam campaign at the
CERN PS, complies with both the performance of the currently operated
MWPC-based readout chambers and the challenging requirements of the ALICE TPC
upgrade program. Detailed simulations of the readout system are able to
reproduce the data.
We propose an experiment (Mu3e) to search for the lepton flavour violating
decay mu+ -> e+e-e+. We aim for an ultimate sensitivity of one in 10^16
mu-decays, four orders of magnitude better than previous searches. This
sensitivity is made possible by exploiting modern silicon pixel detectors
providing high spatial resolution and hodoscopes using scintillating fibres and
tiles providing precise timing information at high particle rates.
The ALICE Collaboration has measured inclusive J/psi production in pp
collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results
presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and
have been obtained by measuring the electron and muon pair decay channels,
respectively. The integrated luminosities for the two channels are L^e_int=1.1
nb^-1 and L^mu_int=19.9 nb^-1, and the corresponding signal statistics are
N_J/psi^e+e-=59 +/- 14 and N_J/psi^mu+mu-=1364 +/- 53. We present
dsigma_J/psi/dy for the two rapidity regions under study and, for the forward-y
range, d^2sigma_J/psi/dydp_t in the transverse momentum domain 0<p_t<8 GeV/c.
The results are compared with previously published results at sqrt(s)=7 TeV and
with theoretical calculations.
The design, construction, and commissioning of the ALICE Time-Projection
Chamber (TPC) is described. It is the main device for pattern recognition,
tracking, and identification of charged particles in the ALICE experiment at
the CERN LHC. The TPC is cylindrical in shape with a volume close to 90 m^3 and
is operated in a 0.5 T solenoidal magnetic field parallel to its axis.
In this paper we describe in detail the design considerations for this
detector for operation in the extreme multiplicity environment of central
Pb--Pb collisions at LHC energy. The implementation of the resulting
requirements into hardware (field cage, read-out chambers, electronics),
infrastructure (gas and cooling system, laser-calibration system), and software
led to many technical innovations which are described along with a presentation
of all the major components of the detector, as currently realized. We also
report on the performance achieved after completion of the first round of
stand-alone calibration runs and demonstrate results close to those specified
in the TPC Technical Design Report.
A Transition Radiation Detector (TRD) has been designed to improve the
electron identification and trigger capability of the ALICE experiment at the
Large Hadron Collider (LHC) at CERN. We present results from tests of a
prototype of the TRD concerning pion rejection for different methods of
analysis over a momentum range from 0.7 to 2 GeV/c. We investigate the
performance of different radiator types, composed of foils, fibres and foams.