-
New electrode materials for alkaline-ion batteries are a timely topic. Among
many promising candidates, V2O5 is one of the most interesting cathode
materials. While having very high theoretical capacity, in practice, its
performance is hindered by low stability and poor conductivity. As regards
theoretical descriptions of V2O5, common DFT-GGA calculations fail to reproduce
both the electronic and crystal structure. While the band gap is
underestimated, the interlayer spacing is overestimated as weak dispersion
interactions are not properly described within GGA. Here we show that the
combination of the DFT+U method and semi-empirical D2 correction can compensate
for the drawbacks of the GGA approximation when it comes to the modelling of
V2O5. When compared to common PBE calculations, with a modest increase of the
computational cost, PBE+U+D2 fully reproduced the experimental band gap of
V2O5, while the errors in the lattice parameters are only a few percent. Using
the proposed PBE+U+D2 methodology we studied V2O5 doped with 3d elements (from
Sc to Zn). We show that both the structural and electronic parameters are
affected by doping. Most importantly, a significant increase of conductivity is
expected upon doping, which is of great importance for the application of V2O5
in metal-ion batteries.
-
New electrode materials for alkaline-ion batteries are a timely topic. Among
many promising candidates, V2O5 is one of the most interesting cathode
materials. While having very high theoretical capacity, in practice, its
performance is hindered by low stability and poor conductivity. As regards
theoretical descriptions of V2O5, common DFT-GGA calculations fail to reproduce
both the electronic and crystal structure. While the band gap is
underestimated, the interlayer spacing is overestimated as weak dispersion
interactions are not properly described within GGA. Here we show that the
combination of the DFT+U method and semi-empirical D2 correction can compensate
for the drawbacks of the GGA approximation when it comes to the modelling of
V2O5. When compared to common PBE calculations, with a modest increase of the
computational cost, PBE+U+D2 fully reproduced the experimental band gap of
V2O5, while the errors in the lattice parameters are only a few percent. Using
the proposed PBE+U+D2 methodology we studied V2O5 doped with 3d elements (from
Sc to Zn). We show that both the structural and electronic parameters are
affected by doping. Most importantly, a significant increase of conductivity is
expected upon doping, which is of great importance for the application of V2O5
in metal-ion batteries.
-
Oxide materials offer a wide range of interesting physical and chemical
properties. Even more versatile behavior of oxides is seen at the nanoscale,
qualifying these materials for a number of applications. In this study we used
DFT calculations to investigate the physical and chemical properties of small
hexagonal MgO nanotubes of different length. We analyzed the effect of Li, B,
C, N, and F doping on the properties of the nanotubes. We find that all dopants
favor the edge positions when, incorporated into the nanotubes. Doping results
in the net magnetization whose value depends on the type of the impurity. Using
the CO molecule as a probe, we studied the adsorption properties of pristine
and doped MgO nanotubes. Our results show that the dopant sites are also the
centers of significantly altered chemical reactivity. While pristine MgO
nanotubes adsorb CO weakly, very strong adsorption at the dopant sites (B-, C-,
and N-doped nanotubes) or neighboring edge atoms (F- and Li-doped nanotubes) is
observed. Our results suggest that impurity engineering in oxide materials can
be a promising strategy for the development of novel materials with possible
use as selective adsorbents or catalysts.
-
Development of novel materials may often require a rational use of high price
components, like noble metals, in combination with the possibility to tune
their properties in a desirable way. Here we present a theoretical DFT study of
Au and Pd single atoms supported by doped MgO(001). By introducing B, C and N
impurities into the MgO(001) surface, the interaction between the surface and
the supported metal adatoms can be adjusted. Impurity atoms act as strong
binding sites for Au and Pd adatoms and can help to produce highly dispersed
metal particles. The reactivity of metal atoms supported by doped MgO(001), as
probed by CO, is altered compared to their counterparts on pristine MgO(001).
We find that Pd atoms on doped MgO(001) are less reactive than on perfect
MgO(001). In contrast, Au adatoms bind CO much stronger when placed on doped
MgO(001). In the case of Au on N-doped MgO(001) we find that charge
redistribution between the metal atom and impurity takes place even when not in
direct contact, which enhances the interaction of Au with CO. The presented
results suggest possible ways for optimizing the reactivity of oxide supported
metal catalysts through impurity engineering.
-
Many active galactic nuclei (AGN) show strong variability of the optical
continuum. Since the line flux, profile shapes and intensity ratios are
changing, we analyze the variability patterns and possible periodicity of Type
1 AGN NGC 5548, using the Eigenvector 1 (EV1) diagram in different variability
states, taking advantage of very long term monitoring campaign data. The
preliminary results suggest that NGC 5548 - a highly variable object that over
several decades has shown large amplitude continuum fluctuations and flaring
behavior - remains Pop B. This means that the range in Eddington ratio, even
when the source is in a bright state, remains consistent with the value of the
low accreting Pop B. We inspected EV 1 parameters of a single object though
long term monitoring, assuming an inclination and black hole mass to be
constant during the observational time. Our results imply that the main driver
for the variations along the EV 1 diagram could be dimensionless accretion
rate. If so, then it appears that the source never crossed the boundary for
structural changes, indicatively placed at $L/L_{Edd} \sim$ 0.2.
-
Vacancies in graphene present sites of altered chemical reactivity and open
possibilities to tune graphene properties by defect engineering. The
understanding of chemical reactivity of such defects is essential for
successful implementation of carbon materials in advanced technologies. We
report the results of a systematic DFT study of atomic adsorption on graphene
with a single vacancy for the elements of rows 1 to 6 of the Periodic Table of
Elements (PTE), excluding lanthanides. The calculations have been performed
using PBE, long-range dispersion interaction-corrected PBE (PBE+D2 and PBE+D3)
and non-local vdW-DF2 functional. We find that most elements strongly bind to
the vacancy, except for the elements of groups 11 and 12, and noble gases, for
which the contribution of dispersion interaction to bonding is most
significant. The strength of the interaction with the vacancy correlates with
the cohesive energy of the elements in their stable phases: the higher the
cohesive energy is the stronger bonding to the vacancy can be expected. As most
atoms can be trapped at the SV site we have calculated the potentials of
dissolution and found that in most cases the metals adsorbed at the vacancy are
more "noble" than they are in their corresponding stable phases.
-
Vacancies in graphene present sites of altered chemical reactivity and open
possibilities to tune graphene properties by defect engineering. The
understanding of chemical reactivity of such defects is essential for
successful implementation of carbon materials in advanced technologies. We
report the results of a systematic DFT study of atomic adsorption on graphene
with a single vacancy for the elements of rows 1 to 6 of the Periodic Table of
Elements (PTE), excluding lanthanides. The calculations have been performed
using PBE, long-range dispersion interaction-corrected PBE (PBE+D2 and PBE+D3)
and non-local vdW-DF2 functional. We find that most elements strongly bind to
the vacancy, except for the elements of groups 11 and 12, and noble gases, for
which the contribution of dispersion interaction to bonding is most
significant. The strength of the interaction with the vacancy correlates with
the cohesive energy of the elements in their stable phases: the higher the
cohesive energy is the stronger bonding to the vacancy can be expected. As most
atoms can be trapped at the SV site we have calculated the potentials of
dissolution and found that in most cases the metals adsorbed at the vacancy are
more "noble" than they are in their corresponding stable phases.
-
Increasing demand and high prices of advanced catalysts motivate a constant
search for novel active materials with reduced content of noble metals. The
development of thin films and core-shell catalysts seem to be a promising
strategy along this path. Using Density Functional Theory we have analyzed a
number of surface properties of supported bimetallic thin films with
composition A3B (where A = Pt, Pd, B = Cu, Ag, Au). We focus on surface
segregation, dissolution stability and surface electronic structure. We also
address the chemisorption properties of Pd3Au thin films supported by different
substrates, by probing the surface reactivity with CO. We find a strong
influence of the support in the case of mono- and bilayers, while the surface
strain seems to be the predominant factor in determining the surface properties
of supported trilayers and thicker films. In particular, we show that the
studied properties of the supported trilayers can be predicted from the lattice
mismatch between the overlayer and the support. Namely, if the strain
dependence of the corresponding quantities for pure strained surfaces is known,
the properties of strained supported trilayers can be reliably estimated. The
obtained results can be used in the design of novel catalysts and predictions
of the surface properties of supported ultrathin catalyst layers.
-
Increasing demand and high prices of advanced catalysts motivate a constant
search for novel active materials with reduced content of noble metals. The
development of thin films and core-shell catalysts seem to be a promising
strategy along this path. Using Density Functional Theory we have analyzed a
number of surface properties of supported bimetallic thin films with
composition A3B (where A = Pt, Pd, B = Cu, Ag, Au). We focus on surface
segregation, dissolution stability and surface electronic structure. We also
address the chemisorption properties of Pd3Au thin films supported by different
substrates, by probing the surface reactivity with CO. We find a strong
influence of the support in the case of mono- and bilayers, while the surface
strain seems to be the predominant factor in determining the surface properties
of supported trilayers and thicker films. In particular, we show that the
studied properties of the supported trilayers can be predicted from the lattice
mismatch between the overlayer and the support. Namely, if the strain
dependence of the corresponding quantities for pure strained surfaces is known,
the properties of strained supported trilayers can be reliably estimated. The
obtained results can be used in the design of novel catalysts and predictions
of the surface properties of supported ultrathin catalyst layers.
-
The understanding of atomic adsorption on graphene is of high importance for
many advanced technologies. Here we present a complete database of the atomic
adsorption energies for the elements of the Periodic Table up to the atomic
number 86 (excluding lanthanides) on pristine graphene. The energies have been
calculated using the projector augmented wave (PAW) method with PBE, long-range
dispersion interaction corrected PBE (PBE+D2, PBE+D3) as well as non-local
vdW-DF2 approach. The inclusion of dispersion interactions leads to an
exothermic adsorption for all the investigated elements. Dispersion
interactions are found to be of particular importance for the adsorption of low
atomic weight earth alkaline metals, coinage and s-metals (11th and 12th
groups), high atomic weight p-elements and noble gases. We discuss the observed
adsorption trends along the groups and rows of the Periodic Table as well some
computational aspects of modelling atomic adsorption on graphene.
-
The understanding of atomic adsorption on graphene is of high importance for
many advanced technologies. Here we present a complete database of the atomic
adsorption energies for the elements of the Periodic Table up to the atomic
number 86 (excluding lanthanides) on pristine graphene. The energies have been
calculated using the projector augmented wave (PAW) method with PBE, long-range
dispersion interaction corrected PBE (PBE+D2, PBE+D3) as well as non-local
vdW-DF2 approach. The inclusion of dispersion interactions leads to an
exothermic adsorption for all the investigated elements. Dispersion
interactions are found to be of particular importance for the adsorption of low
atomic weight earth alkaline metals, coinage and s-metals (11th and 12th
groups), high atomic weight p-elements and noble gases. We discuss the observed
adsorption trends along the groups and rows of the Periodic Table as well some
computational aspects of modelling atomic adsorption on graphene.
-
We present an improved statistical method for calculation of mean lifetime of
nuclei in a decay chain with uncertain relation between mother and daughter
nuclei. The method is based on formation of time distribution of intervals
between mother and daughter nuclei, without trying to set the exact
mother-daughter nuclei relationship. If there is a coincidence of mother and
daughter nuclei decays, sum of these distributions has flat term on which an
exponential term is superimposed. Parameters of this exponential function allow
lifetime of daughter nucleus to be extracted. The method is tested on Monte
Carlo simulation data.
-
It has been claimed that the nova-like cataclysmic variable (CV) AE Aquarii
(AE Aqr) is a very-high-energy (VHE, $E>$100 GeV) source both on observational
and theoretical grounds. We aim to search for VHE gamma-ray emission from AE
Aqr during different states of the source at several wavelengths to confirm or
rule out previous claims of detection of gamma-ray emission from this object.
We report on observations of AE Aqr performed by MAGIC. The source was observed
during 12 hours as part of a multiwavelength campaign carried out between May
and June 2012 covering the optical, X-ray, and gamma-ray ranges. Besides MAGIC,
the other facilities involved were the KVA, Skinakas, and Vidojevica telescopes
in the optical and Swift in X-rays. We calculated integral upper limits
coincident with different states of the source in the optical. We computed
upper limits to the pulsed emission limiting the signal region to 30% of the
phaseogram and we also searched for pulsed emission at different frequencies
applying the Rayleigh test. AE Aqr was not detected at VHE energies during the
multiwavelength campaign. We establish integral upper limits at the 95\%
confidence level for the steady emission assuming the differential flux
proportional to a power-law function d\phi/dE \propto E^{-Gamma}, with a
Crab-like photon spectral index of Gamma=2.6. The upper limit above 200 GeV is
6.4\times10^{-12} cm^{-2}s^{-1} and above 1 TeV is 7.4\times10^{-13}
cm^{-2}s^{-1}. We obtained an upper limit for the pulsed emission of
2.6\times10^{-12} cm^{-2}s^{-1} for energies above 200 GeV. Applying the
Rayleigh test for pulsed emission at different frequencies we did not find any
significant signal. Our results indicate that AE Aqr is not a VHE gamma-ray
emitter at the level of emission previously claimed. We have established the
most constraining upper limits for the VHE gamma-ray emission of AE Aqr.
-
Ensuring the radiation hardness of PbWO4 crystals was one of the main
priorities during the construction of the electromagnetic calorimeter of the
CMS experiment at CERN. The production on an industrial scale of radiation hard
crystals and their certification over a period of several years represented a
difficult challenge both for CMS and for the crystal suppliers. The present
article reviews the related scientific and technological problems encountered.
-
The generally adopted value for the solar abundance of indium is over six
times higher than the meteoritic value. We address this discrepancy through
numerical synthesis of the 451.13 nm line on which all indium abundance studies
are based, both for the quiet-sun and the sunspot umbra spectrum, employing
standard atmosphere models and accounting for hyperfine structure and Zeeman
splitting in detail. The results, as well as a re-appraisal of indium
nucleosynthesis, suggest that the solar indium abundance is close to the
meteoritic value, and that some unidentified ion line causes the 451.13 nm
feature in the quiet-sun spectrum.
-
We present an analysis of 3D spectra of Mrk 533, observed with the
integral-field spectrograph MPFS and using the Fabry Perot Interferometer (FPI)
of the SAO RAS 6-m telescope. We found emissions of gas from the active Sy 2
nucleus in the centre and also from the HII regions in a spiral structure and a
circumnuclear region. The gas kinematics shows regular non-circular motions in
the wide range of galactocentric distances from 500 pc up to 15 kpc. The maps
of inward and outward radial motions of the ionized gas was constructed. We
found that the narrow line region (NLR) is composed of at least two (probably
three) kinematically separated regions. We detect a stratification in the NLR
of Mrk 533 with the outflow velocity ranging from 20-50 km/s to 600-700 km/s,
respectively, on the radial distances of ~2.5 and ~1.5 kpc. The maximal outflow
velocity comes from the nucleus and corresponds to the position of the observed
radio structure, which is assumed to be created in an approaching jet. We
suggest that these ionized gas outflows are triggered by the radio jet
intrusion in an ambient medium.
-
We present high resolution VLT UVES observations of the active K dwarf GJ
117. 6^Li enhancement has been shown for energetic solar events, one
chromospherically active binary, and several dwarf halo stars. Our analysis
reveals the detection of 6^Li on this source with 6^Li/7^Li = 0.030+/-0.010. We
found no significant contribution from other lines, including Ti I, in the Li
profile of GJ 117 and a template star of similar spectral type and metallicity.
We discuss the possibility for 6^Li production by spallation and find it to be
consistent with the activity levels of the object.
-
The properties of particle production in pp collisions are basis for analysis
of pA and AA interactions and verification of theory. We analyzed inclusive
particle production using z-scaling established in proton-proton and
proton-antiproton collisions at the U70, ISR, Tevatron and RHIC. This scaling
reflects symmetry of hadron structure, interaction and particle formation. It
is shown that new data on charged hadron and pi0-meson spectra obtained in pp
collisions at the Relativistic Heavy Ion Collider confirm the z-scaling.
-
Scaling features of particles produced in pi-p and pi-A collisions over a
high-pT range at high energies are studied. The general concept of z-scaling is
applied for the analysis of pi-p and pi-A experimental data on the inclusive
cross section. The scaling function psi(z) and scaling variable z are
constructed and the anomalous dimension delta_pi is found. The A-dependence of
particle production in pion-nucleus collisions is studied. The predictions of
the inclusive cross section of the pi0-mesons produced in pi-A collisions in
the central rapidity range at high energies have been made.
-
This paper gives a self-contained and complete proof of the isomorphism of
freely generated monoids extracted from Temperley-Lieb algebras with monoids
made of Kauffman's diagrams.