• We investigate the margination of microparticles/platelets in blood flow through complex geometries typical for in vivo vessel networks: a vessel confluence and a bifurcation. Using 3D Lattice-Boltzmann simulations, we confirm that behind the confluence of two vessels a cell-free layer devoid of red blood cells develops in the channel center. Despite its small size of roughly one micrometer, this central cell-free layer persists for up to 100 $\mu$m after the confluence. Most importantly, we show from simulations that this layer also contains a significant amount of microparticles/platelets and validate this result by in vivo microscopy in mouce venules. At bifurcations, however, a similar effect does not appear and margination is largely unaffected by the geometry. This anti-margination towards the vessel center after a confluence may explain in vivo observations by Woldhuis et al. [Am. J. Physiol. 262, H1217 (1992)] where platelet concentrations near the vessel wall are seen to be much higher on the arteriolar side (containing bifurcations) than on the venular side (containing confluences) of the vascular system.
  • We combine confocal imaging, microfluidics and image analysis to record 3D-images of cells in flow. This enables us to recover the full 3D representation of several hundred living cells per minute. Whereas 3D confocal imaging has thus far been limited to steady specimen, we overcome this restriction and present a method to access the 3D shape of moving objects. The key of our principle is a tilted arrangement of the micro-channel with respect to the focal plane of the microscope. This forces cells to traverse the focal plane in an inclined manner. As a consequence, individual layers of passing cells are recorded which can then be assembled to obtain the volumetric representation. The full 3D information allows for a detailed comparisons with theoretical and numerical predictions unfeasible with e.g.\ 2D imaging. Our technique is exemplified by studying flowing red blood cells in a micro-channel reflecting the conditions prevailing in the microvasculature. We observe two very different types of shapes: `croissants' and `slippers'. Additionally, we perform 3D numerical simulations of our experiment to confirm the observations. Since 3D confocal imaging of cells in flow has not yet been realized, we see high potential in the field of flow cytometry where cell classification thus far mostly relies on 1D scattering and fluorescence signals.
  • The interactions between carbon nanotubes (CNTs) and metal adatoms as well as metal contacts are studied by means of ab initio electronic structure calculations. We show that the electronic properties of a semiconducting (8,4) CNT can be modified by small amounts of Pd adatoms. Such a decoration conserves the piezoelectric properties of the CNT. Besides the electronic influence, the stability of a single adatom, which is of big importance for future technology applications, is investigated as well. We find only small energy barriers for the diffusion of a Pd adatom on the CNT surface. Thus, single Pd adatoms will be mobile at room temperature. Finally we present results for the interaction between a metallic (6,0) CNT and metal surfaces. Binding energies and distances for Al, Cu, Pd, Ag, Pt, and Au are discussed and compared, showing remarkable agreement between the interaction of single metal atoms and metal surfaces with CNTs.
  • A nanoscopic simulation for an acceleration sensor is aimed based on the piezoresistive effect of carbon nanotubes (CNTs). Therefore, a compact model is built from density functional theory (DFT), compared with results of molecular dynamics (MD) that describes the mechanics of carbon nanotubes in a parameterized way. The results for the interesting kind of CNTs [(6,3) and (7,4)] within the two approaches agree in a satisfying way, when DFT-calculations are performed with atomic configurations obtained by MD geometry optimization. Geometry optimization yields the Poisson ratio for CNTs. Thus, values from MD and DFT are compared. The simulation finally aims the modeling of the conductive behavior of CNTs when strain is applied, but this needs further verification. Here, we present the prediction of the tight binding model for suitable CNTs.
  • Electronic applications of carbon nanotubes (CNTs) require the deposition of dielectric films on the tubes while conserving their excellent electronic properties. In our density functional theory study we use the trimethylaluminum (TMA) atomic layer deposition (ALD) as a model process for a CNT-functionalization. Since this functionalization relies on the presence of OH-groups, the CNTs are exposed to a water or oxygen pre-treatment. We show that only CNTs with a single-vacancy defect are able to react with H$_{2}$O or O$_{2}$. Further, the defect is preferably saturated by oxygen. This leaves the CNT without the necessary hydroxyl groups for the first TMA addition. Therefore, we propose an alternative initial step after which a classical TMA ALD process can be performed on the CNT.
  • Ultra-low-k (ULK) materials are essential for today's production of integrated circuits (ICs). However, during the manufacturing process the ULK's low dielectric constant (k-value) increases due to the replacement of hydrophobic species with hydrophilic groups. We investigate the use of plasma enhanced fragmented silylation precursors to repair this damage. The fragmentation of the silylation precursors octamethylcyclotetrasiloxane (OMCTS) and bis(dimethylamino)-dimethylsilane (DMADMS) and their possible repair reactions are studied using density functional theory (DFT) and molecular dynamics (MD) simulations.
  • We present theoretical investigations of a k-restore process for damaged pourous ultra-low-k (ULK) materials. The process is based on plasma enhanced fragmented silylation precursors to replace k-value damaging, polar Si-OH and Si-H bonds by k-value lowering Si-CH$_{3}$ bonds. We employ density functional theory (DFT) to determine the favored fragments of silylation precursors and show the successful repair of damaged bonds on our model system. This model system consists of a small set of ULK-fragments which represent various damaged states of ULK materials. Our approach provides a fast scanning method for a wide variety of possible repair reactions. Further, we show that oxygen containing fragments are required to repair Si-H bonds and fragments with dangling Si-bonds are most effective to repair polar Si-OH bonds.
  • We present an empirical model for the nearballistic transport in carbon nanotube (CNT) transistors used as strain sensors. This model describes the intrinsic effect of strain on the transport in CNTs by taking into account phonon scattering and thermally activated charge carriers. As this model relies on a semiempirical description of the electronic bands, different levels of electronic structure calculations can be used as input. The results show that the electronic structure of strained single-walled CNTs with a radius larger than 0.7nm can be described by a fully analytical model in the sensing regime. For CNTs with smaller diameter, parameterized data from electronic structure calculations can be used for the model. Depending on the type of CNTs, the conductance can vary by several orders of magnitude when strain is applied, which is consistent with the current literature. Further, we demonstrate the tuning of the sensor by an external gate which allows shifting the signal amplitude and the strain sensitivity. These parameters have to be balanced to get good sensing properties. Due to its basically analytical nature, the transport model can be formulated as a compact model for circuit simulations.
  • We investigate the piezoresistive effect of carbon nanotubes (CNTs) within density functional theory (DFT) aiming at application-relevant CNTs. CNTs are excellent candidates for the usage in nano-electromechanical sensors (NEMS) due to their small band gap at zero strain leading to a finite resistivity at room temperature. The application of strain induces a band gap-opening leading to a tremendous change in the resistivity. DFT with the LDA approximation yields reasonable results for pure carbon systems like CNTs and is applied to calculate the electronic structure of experimentally relevant CNTs. For the transport part, a simple ballistic transport model based on the band gap is used. We compare our DFT results for the band gaps of strained CNTs to results of tight binding (TB) models. By introducing a scaling factor of $\sqrt{2}$, an excellent agreement of the the DFT data with TB model published by Yang et al. [1] is obtained.
  • We convert a GeV laser-plasma electron accelerator into a compact femtosecond-pulsed $\gamma$-ray source by inserting a $100 \mu$m-thick glass plate $\sim3$ cm after the accelerator exit. With near-unity reliability, and requiring only crude alignment, this glass plasma mirror retro-reflected spent drive laser pulses (photon energy $\hbar\omega_L = 1.17$ eV) with $>50\%$ efficiency back onto trailing electrons (peak Lorentz factor $1000 < \gamma_e < 4400$), creating an optical undulator that generated $\sim10^8 \gamma$-ray photons with sub-mrad divergence, estimated peak brilliance $\sim10^{21}$ photons/s/mm$^2$/mrad$^2$/$0.1\%$ bandwidth and negligible bremsstrahlung background. The $\gamma$-ray photon energy $E_\gamma = 4\gamma_e^2 \hbar\omega_L$, inferred from the measured $\gamma_e$ on each shot, peaked from 5 to 85 MeV, spanning a range otherwise available with comparable brilliance only from large-scale GeV-linac-based high-intensity $\gamma$-ray sources.
  • We present a theory of flagellar synchronization in the green alga Chlamydomonas, using full treatment of flagellar hydrodynamics. We find that two recently proposed synchronization mechanisms, basal coupling and flagellar waveform compliance, stabilize anti-phase synchronization if operative in isolation. Their nonlinear superposition, however, stabilizes in-phase synchronization as observed in experiments. Our theory predicts different synchronization dynamics in fluids of increased viscosity or external flow, suggesting a non-invasive way to control synchronization by hydrodynamic coupling.
  • Native horse mucus is characterized with micro- and macrorheology and compared to hydroxyethylcellulose (HEC) gel as a model. Both systems show comparable viscoelastic properties on the microscale and for the HEC the macrorheology is in good agreement with the microrheology. For the mucus, the viscoelastic moduli on the macroscale are several orders of magnitude larger than on the microscale. Large amplitude oscillatory shear experiments show that the mucus responds nonlinearly at much smaller deformations than HEC. This behavior fosters the assumption that the mucus has a foam like structure on the microscale compared to the typical mesh like structure of the HEC, a model that is supported by cryogenic-scanning-electron-microscopy (CSEM) images. These images allow also to determine the relative amount of volume that is occupied by the pores and the scaffold. Consequently, we can estimate the elastic modulus of the scaffold. We conclude that this particular foam like microstructure should be considered as a key factor for the transport of particulate matter which plays a central role in mucus function with respect to particle penetration. The mesh properties composed of very different components are responsible for macroscopic and microscopic behavior being part of particles fate after landing.
  • The supply of oxygen and nutrients and the disposal of metabolic waste in the organs depend strongly on how blood, especially red blood cells, flow through the microvascular network. Macromolecular plasma proteins such as fibrinogen cause red blood cells to form large aggregates, called rouleaux, which are usually assumed to be disaggregated in the circulation due to the shear forces present in bulk flow. This leads to the assumption that rouleaux formation is only relevant in the venule network and in arterioles at low shear rates or stasis. Thanks to an excellent agreement between combined experimental and numerical approaches, we show that despite the large shear rates present in microcapillaries, the presence of either fibrinogen or the synthetic polymer dextran leads to an enhanced formation of robust clusters of red blood cells, even at haematocrits as low as 1%. Robust aggregates are shown to exist in microcapillaries even for fibrinogen concentrations within the healthy physiological range. These persistent aggregates should strongly affect cell distribution and blood perfusion in the microvasculature, with putative implications for blood disorders even within apparently asymptomatic subjects.
  • Jan. 8, 2014 hep-ph, hep-ex
    This report summarizes the work of the Energy Frontier Higgs Boson working group of the 2013 Community Summer Study (Snowmass). We identify the key elements of a precision Higgs physics program and document the physics potential of future experimental facilities as elucidated during the Snowmass study. We study Higgs couplings to gauge boson and fermion pairs, double Higgs production for the Higgs self-coupling, its quantum numbers and $CP$-mixing in Higgs couplings, the Higgs mass and total width, and prospects for direct searches for additional Higgs bosons in extensions of the Standard Model. Our report includes projections of measurement capabilities from detailed studies of the Compact Linear Collider (CLIC), a Gamma-Gamma Collider, the International Linear Collider (ILC), the Large Hadron Collider High-Luminosity Upgrade (HL-LHC), Very Large Hadron Colliders up to 100 TeV (VLHC), a Muon Collider, and a Triple-Large Electron Positron Collider (TLEP).
  • The LHC Higgs Cross Section Working Group: S. Heinemeyer, C. Mariotti, G. Passarino, R. Tanaka, J. R. Andersen, P. Artoisenet, E. A. Bagnaschi, A. Banfi, T. Becher, F. U. Bernlochner, S. Bolognesi, P. Bolzoni, R. Boughezal, D. Buarque, J. Campbell, F. Caola, M. Carena, F. Cascioli, N. Chanon, T. Cheng, S. Y. Choi, A. David, P. de Aquino, G. Degrassi, D. Del Re, A. Denner, H. van Deurzen, S. Diglio, B. Di Micco, R. Di Nardo, S. Dittmaier, M. Duhrssen, R. K. Ellis, G. Ferrera, N. Fidanza, M. Flechl, D. de Florian, S. Forte, R. Frederix, S. Frixione, S. Gangal, Y. Gao, M. V. Garzelli, D. Gillberg, P. Govoni, M. Grazzini, N. Greiner, J. Griffiths, A .V. Gritsan, C. Grojean, D. C. Hall, C. Hays, R. Harlander, R. Hernandez-Pinto, S. Hoche, J. Huston, T. Jubb, M. Kadastik, S. Kallweit, A. Kardos, L. Kashif, N. Kauer, H. Kim, R. Klees, M. Kramer, F. Krauss, A. Laureys, S. Laurila, S. Lehti, Q. Li, S. Liebler, X. Liu, H. E. Logan, G. Luisoni, M. Malberti, F. Maltoni, K. Mawatari, F. Maierhofer, H. Mantler, S. Martin, P. Mastrolia, O. Mattelaer, J. Mazzitelli, B. Mellado, K. Melnikov, P. Meridiani, D. J. Miller, E. Mirabella, S. O. Moch, P. Monni, N. Moretti, A. Muck, M. Muhlleitner, P. Musella, P. Nason, C. Neu, M. Neubert, C. Oleari, J. Olsen, G. Ossola, T. Peraro, K. Peters, F. Petriello, G. Piacquadio, C. T. Potter, S. Pozzorini, K. Prokofiev, I. Puljak, M. Rauch, D. Rebuzzi, L. Reina, R. Rietkerk, A. Rizzi, Y. Rotstein-Habarnau, G. P. Salam, G. Sborlini, F. Schissler, M. Schonherr, M. Schulze, M. Schumacher, F. Siegert, P. Slavich, J. M. Smillie, O. Stal, J. F. von Soden-Fraunhofen, M. Spira, I. W. Stewart, F. J. Tackmann, P. T. E. Taylor, D. Tommasini, J. Thompson, R. S. Thorne, P. Torrielli, F. Tramontano, N. V. Tran, Z. Trocsanyi, M. Ubiali, P. Vanlaer, M. Vazquez Acosta, T. Vickey, A. Vicini, W. J. Waalewijn, D. Wackeroth, C. Wagner, J. R. Walsh, J. Wang, G. Weiglein, A. Whitbeck, C. Williams, J. Yu, G. Zanderighi, M. Zanetti, M. Zaro, P. M. Zerwas, C. Zhang, T. J .E. Zirke, S. Zuberi
    Nov. 29, 2013 hep-ph, hep-ex
    This Report summarizes the results of the activities in 2012 and the first half of 2013 of the LHC Higgs Cross Section Working Group. The main goal of the working group was to present the state of the art of Higgs Physics at the LHC, integrating all new results that have appeared in the last few years. This report follows the first working group report Handbook of LHC Higgs Cross Sections: 1. Inclusive Observables (CERN-2011-002) and the second working group report Handbook of LHC Higgs Cross Sections: 2. Differential Distributions (CERN-2012-002). After the discovery of a Higgs boson at the LHC in mid-2012 this report focuses on refined prediction of Standard Model (SM) Higgs phenomenology around the experimentally observed value of 125-126 GeV, refined predictions for heavy SM-like Higgs bosons as well as predictions in the Minimal Supersymmetric Standard Model and first steps to go beyond these models. The other main focus is on the extraction of the characteristics and properties of the newly discovered particle such as couplings to SM particles, spin and CP-quantum numbers etc.
  • Red blood cells are known to form aggregates in the form of rouleaux. This aggregation process is believed to be reversible, but there is still no full understanding on the binding mechanism. There are at least two competing models, based either on bridging or on depletion. We review recent experimental results on the single cell level and theoretical analyses of the depletion model and of the influence of the cell shape on the binding strength. Another important aggregation mechanism is caused by activation of platelets. This leads to clot formation which is life saving in the case of wound healing but also a major cause of death in the case of a thrombus induced stroke. We review historical and recent results on the participation of red blood cells in clot formation.
  • It is presently believed that flows of viscoelastic polymer solutions in geometries such as a straight pipe or channel are linearly stable. Here we present experimental evidence that such flows can be nonlinearly unstable and can exhibit a subcritical bifurcation. Velocimetry measurements are performed in a long, straight micro-channel; flow disturbances are introduced at the entrance of the channel system by placing a variable number of obstacles. Above a critical flow rate and a critical size of the perturbation, a sudden onset of large velocity fluctuations indicates presence of a nonlinear subcritical instability. Together with the previous observations of hydrodynamic instabilities in curved geometries, our results suggest that any flow of polymer solutions becomes unstable at sufficiently high flow rates.
  • We investigated the flow profile of a polymer solution in a thinning capillary bridge. Fluorescent tracer particles with a diameter of 3$\mu$m were used to visualize the flow. The cylindrical shape of the filament introduced strong optical abberations that could be corrected for, and we were able to characterize the flow in filaments with a thickness ranging from 150 to 30 $\mu$m. In the first regime when the filament was still sufficiently large, we used a PIV algorithm to deduce the flow field. At later stages when the number of particles in the observation plane decreased a PTV algorithm was used. The main two results of our measurements are as follows. First, the flow profile at the formation of the cylindrical filament is highly inhomogeneous and there is only flow in the outer parts of the filament. Second, we find that in most parts of the regime, where the temporal radius of the thinning filament can be fitted with an exponential law the flow indeed is purely extensional.
  • Comparing clustering of differently biased tracers of the dark matter distribution offers the opportunity to reduce the cosmic variance error in the measurement of certain cosmological parameters. We develop a formalism that includes bias non-linearities and stochasticity. Our formalism is general enough that can be used to optimise survey design and tracers selection and optimally split (or combine) tracers to minimise the error on the cosmologically interesting quantities. Our approach generalises the one presented by McDonald & Seljak (2009) of circumventing sample variance in the measurement of $f\equiv d \ln D/d\ln a$. We analyse how the bias, the noise, the non-linearity and stochasticity affect the measurements of $Df$ and explore in which signal-to-noise regime it is significantly advantageous to split a galaxy sample in two differently-biased tracers. We use N-body simulations to find realistic values for the parameters describing the bias properties of dark matter haloes of different masses and their number density. We find that, even if dark matter haloes could be used as tracers and selected in an idealised way, for realistic haloes, the sample variance limit can be reduced only by up to a factor $\sigma_{2tr}/\sigma_{1tr}\simeq 0.6$. This would still correspond to the gain from a three times larger survey volume if the two tracers were not to be split. Before any practical application one should bear in mind that these findings apply to dark matter haloes as tracers, while realistic surveys would select galaxies: the galaxy-host halo relation is likely to introduce extra stochasticity, which may reduce the gain further.
  • A scanning tunneling microscope (STM) has been equipped with a nanoscale force sensor and signal transducer composed of a single D2 molecule that is confined in the STM junction. The uncalibrated sensor is used to obtain ultra-high geometric image resolution of a complex organic molecule adsorbed on a noble metal surface. By means of conductance-distance spectroscopy and corresponding density functional calculations the mechanism of the sensor/transducer is identified. It probes the short-range Pauli repulsion and converts this signal into variations of the junction conductance.
  • With the invention of scanning probe techniques, direct imaging of single atoms and molecules became possible. Today, scanning tunnelling microscopy (STM) routinely provides angstrom-scale image resolution. At the same time, however, STM images suffer from a serious drawback - the absence of chemical information. Here we demonstrate a modification of STM that resolves the chemical structure of molecular adsorbates. The key to the new STM mode is a combined force sensor and signal transducer that is formed within the tunnelling junction when a suitable gas condenses there. The method probes the repulsive branch of the surface adsorption potential and transforms the force signal into a current. Obtained images achieve the same resolution as state-of-the-art atomic force microscopy (AFM). In contrast to AFM, however, our (uncalibrated) force sensor is of nanoscale dimensions and therefore intrinsically insensitive to those long-range interactions that make atomic-resolution AFM so demanding.
  • We review three different types of viscoelastic surface instabilities: The Rayleigh -- Plateau, the Saffman -- Taylor and the Faraday instability. These instabilities are classical examples of hydrodynamic surface instabilities. The addition of a small amount of polymers to pure water can alter its flow behavior drastically and the type of instability may change not only quantitatively but also qualitatively. We will show that some of the observed new phenomena can be explained by the use of simple rheological models that contain most of the underlying physical mechanisms leading to the instability. A quantitative description however is often only possible close to the onset of the instability or for weak deviations from Newtonian behavior. A complete theoretical description is still lacking when the system is driven far from equilibrium or for fluids with strong non-Newtonian behavior.
  • We investigate a variety of different polymer solutions in shear and elongational flow. The shear flow is created in the cone-plate-geometry of a commercial rheometer. We use capillary thinning of a filament that is formed by a polymer solution in the Capillary Breakup Extensional Rheometer (CaBER) as an elongational flow. We compare the relaxation time and the elongational viscosity measured in the CaBER with the first normal stress difference and the relaxation time that we measured in our rheometer. All of these four quantities depend on different fluid parameters - the viscosity of the polymer solution, the polymer concentration within the solution, and the molecular weight of the polymers - and on the shear rate (in the shear flow measurements). Nevertheless, we find that the first normal stress coefficient depends quadratically on the CaBER relaxation time. A simple model is presented that explains this relation.
  • When a dilute polymer solution experiences capillary thinning, it forms an almost uniformly cylindrical thread, which we study experimentally. In the last stages of thinning, when polymers have become fully stretched, the filament becomes prone to instabilities, of which we describe two: A novel "breathing" instability, originating from the edge of the filament, and a sinusoidal instability in the interior, which ultimately gives rise to a "blistering" pattern of beads on the filament. We describe the linear instability with a spatial resolution of 80 nm in the disturbance amplitude. For sufficiently high polymer concentrations, the filament eventually separates out into a "solid" phase of entangled polymers, connected by fluid beads. A solid polymer fiber of about 100 nanometer thickness remains, which is essentially permanent.
  • We studied the microscopic polymer conformations in the droplet detachment process of an elastic semi-dilute polyelectrolytic Xanthan solution by measuring the instantaneous birefringence. As in earlier studies, we observe the suppression of the finite time singularity of the pinch-off process and the occurrence of an elastic filament. Our microscopic measurements reveal that the relatively stiff Xanthan molecules are already significantly pre-stretched to about 90 % of their final extension at the moment the filament appears. At later stages of the detachment process, we find evidence of a concentration enhancement due to the elongational flow.