-
Bottomonium production in heavy ion collisions is modified compared with any
simple extrapolation from elementary collisions. This modification is most
likely caused by the presence of a deconfined system of quarks and gluons for
times of several fm/c. In such a medium, bottomonium can be destroyed, but the
constituent bottom quarks will likely stay spatially correlated due to small
mean free paths in this system. With these facts in mind, we describe
bottomonium formation with a coupled set of equations. A rate equation
describes the destruction of $\Upsilon(1S)$ particles, while a Langevin
equation describes how the bottom quarks stay correlated for a sufficiently
long time so that recombination into bottomonia is possible. We show that
within this approach it is possible to understand the magnitude of
$\Upsilon(1S)$ suppression in heavy ion collisions and the larger suppression
of the $\Upsilon(2S)$ state, implying that the reduction in the ratio of
$\Upsilon(1S)/\Upsilon(2S)$ yield in heavy ion collision does not necessarily
correspond to sequential melting picture.
-
We have constructed an equation of state which smoothly interpolates between
an excluded volume hadron resonance gas at low energy density to a plasma of
quarks and gluons at high energy density. This crossover equation of state
agrees very well with lattice calculations at both zero and nonzero baryon
chemical potential. We use it to compute the variance, skewness, and kurtosis
of fluctuations of baryon number, and compare to measurements of proton number
fluctuations in central Au-Au collisions as measured by the STAR collaboration
in a beam energy scan at the Relativistic Heavy Ion Collider. The crossover
equation of state can reproduce the data if the fluctuations are frozen out at
temperatures well below than the average chemical freeze-out.
-
Over the past decade, a large number of jet substructure observables have
been proposed in the literature, and explored at the LHC experiments. Such
observables attempt to utilize the internal structure of jets in order to
distinguish those initiated by quarks, gluons, or by boosted heavy objects,
such as top quarks and W bosons. This report, originating from and motivated by
the BOOST2013 workshop, presents original particle-level studies that aim to
improve our understanding of the relationships between jet substructure
observables, their complementarity, and their dependence on the underlying jet
properties, particularly the jet radius and jet transverse momentum. This is
explored in the context of quark/gluon discrimination, boosted W boson tagging
and boosted top quark tagging.
-
Fluctuations of the proton number distribution in central Au-Au collisions
have been measured by the STAR collaboration in a beam energy scan at the
Relativistic Heavy Ion Collider (RHIC). The motivation is a search for evidence
of a critical point in the equation of state. It was found that the skewness
and kurtosis display an interesting energy dependence. We compare these
measurements to an equation of state which smoothly interpolates between an
excluded volume hadron resonance gas at low energy density to a perturbative
plasma of quarks and gluons at high energy density. This crossover equation of
state agrees very well with the lattice QCD equation of state. The crossover
equation of state can reproduce the data if the fluctuations are frozen at a
temperature significantly lower than the average chemical freeze-out.
-
We construct a model for baryon diffusion which has the desired properties of
analyticity and causality. The model also has the desired property that the
noise correlation function is not a Dirac delta function in space and time. The
model depends on three time constants in addition to the diffusion constant.
This description can be incorporated into 2nd order viscous hydrodynamical
models of heavy ion collisions.
-
The fluctuation-dissipation theorem requires the presence of thermal noise in
viscous fluids. The time and length scales of heavy ion collisions are small
enough so that the thermal noise can have a measurable effect on observables.
Thermal noise is included in numerical simulations of high energy lead-lead
collisions, increasing average values of the momentum eccentricity and
contributing to its event by event fluctuations.
-
We match three hadronic equations of state at low energy densities to a
perturbatively computed equation of state of quarks and gluons at high energy
densities. One of them includes all known hadrons treated as point particles,
which approximates attractive interactions among hadrons. The other two
include, in addition, repulsive interactions in the form of excluded volumes
occupied by the hadrons. A switching function is employed to make the crossover
transition from one phase to another without introducing a thermodynamic phase
transition. A chi-square fit to accurate lattice calculations with temperature
$100 < T < 1000$ MeV determines the parameters. These parameters quantify the
behavior of the QCD running gauge coupling and the hard core radius of protons
and neutrons, which turns out to be $0.62 \pm 0.04$ fm. The most physically
reasonable models include the excluded volume effect. Not only do they include
the effects of attractive and repulsive interactions among hadrons, but they
also achieve better agreement with lattice QCD calculations of the equation of
state. The equations of state constructed in this paper do not result in a
phase transition, at least not for the temperatures and baryon chemical
potentials investigated. It remains to be seen how well these equations of
state will represent experimental data on high energy heavy ion collisions when
implemented in hydrodynamic simulations.
-
We construct a model of baryon diffusion which has the desired properties of
causality and analyticity. The model also has the desired property of colored
noise, meaning that the noise correlation function is not a Dirac delta
function in space and time; rather, it depends on multiple time and length
constants. The model can readily be incorporated in 3+1 dimensional second
order viscous hydro-dynamical models of heavy ion collisions, which is
particularly important at beam energies where the baryon density is large.
-
We present a first calculation of the dilepton yield and elliptic flow done
with 3+1D viscous hydrodynamical simulations of relativistic heavy ion
collisions at the top RHIC energy. A comparison with recent experimental data
from the STAR collaboration is made.
-
Results on beam tests of 3D silicon pixel sensors aimed at the ATLAS
Insertable-B-Layer and High Luminosity LHC (HL-LHC)) upgrades are presented.
Measurements include charge collection, tracking efficiency and charge sharing
between pixel cells, as a function of track incident angle, and were performed
with and without a 1.6 T magnetic field oriented as the ATLAS Inner Detector
solenoid field. Sensors were bump bonded to the front-end chip currently used
in the ATLAS pixel detector. Full 3D sensors, with electrodes penetrating
through the entire wafer thickness and active edge, and double-sided 3D sensors
with partially overlapping bias and read-out electrodes were tested and showed
comparable performance.
-
3D Silicon sensors fabricated at FBK-irst with the Double-side Double Type
Column (DDTC) approach and columnar electrodes only partially etched through
p-type substrates were tested in laboratory and in a 1.35 Tesla magnetic field
with a 180GeV pion beam at CERN SPS. The substrate thickness of the sensors is
about 200um, and different column depths are available, with overlaps between
junction columns (etched from the front side) and ohmic columns (etched from
the back side) in the range from 110um to 150um. The devices under test were
bump bonded to the ATLAS Pixel readout chip (FEI3) at SELEX SI (Rome, Italy).
We report leakage current and noise measurements, results of functional tests
with Am241 gamma-ray sources, charge collection tests with Sr90 beta-source and
an overview of preliminary results from the CERN beam test.
-
A detailed study is presented of the expected performance of the ATLAS
detector. The reconstruction of tracks, leptons, photons, missing energy and
jets is investigated, together with the performance of b-tagging and the
trigger. The physics potential for a variety of interesting physics processes,
within the Standard Model and beyond, is examined. The study comprises a series
of notes based on simulations of the detector and physics processes, with
particular emphasis given to the data expected from the first years of
operation of the LHC at CERN.