• ### A VLT/MUSE galaxy survey towards QSO Q1410: looking for a WHIM traced by BLAs in inter-cluster filaments(1803.09794)

April 5, 2018 astro-ph.GA
Cosmological simulations predict that a significant fraction of the low-$z$ baryon budget resides in large-scale filaments in the form of a diffuse plasma at temperatures $T \sim 10^{5} - 10^{7}$ K. However, direct observation of this so-called warm-hot intergalactic medium (WHIM) has been elusive. In the $\Lambda$CDM paradigm, galaxy clusters correspond to the nodes of the cosmic web at the intersection of several large-scale filamentary threads. In previous work, we used HST/COS data to conduct the first survey of broad HI Ly$\alpha$ absorbers (BLAs) potentially produced by WHIM in inter-cluster filaments. We targeted a single QSO, namely Q1410, whose sight-line intersects $7$ independent inter-cluster axes at impact parameters $<3$ Mpc (co-moving), and found a tentative excess of a factor of ${\sim}4$ with respect to the field. Here, we further investigate the origin of these BLAs by performing a blind galaxy survey within the Q1410 field using VLT/MUSE. We identified $77$ sources and obtained the redshifts for $52$ of them. Out of the total sample of $7$ BLAs in inter-cluster axes, we found $3$ without any galaxy counterpart to stringent luminosity limits ($\sim 4 \times 10^{8}$ L$_{\odot}$ ${\sim} 0.01$ L$_{*}$), providing further evidence that these BLAs may represent genuine WHIM detections. We combined this sample with other suitable BLAs from the literature and inferred the corresponding baryon mean density for these filaments in the range $\Omega^{\rm fil}_{\rm bar}= 0.02-0.04$. Our rough estimates are consistent with the predictions from numerical simulations but still subject to large systematic uncertainties, mostly from the adopted geometry, ionization corrections and density profile.
• ### Trident: a universal tool for generating synthetic absorption spectra from astrophysical simulations(1612.03935)

Sept. 22, 2017 astro-ph.GA, astro-ph.IM
Hydrodynamical simulations are increasingly able to accurately model physical systems on stellar, galactic, and cosmological scales, however, the utility of these simulations is often limited by our ability to directly compare them with the datasets produced by observers: spectra, photometry, etc. To address this problem, we have created Trident}, a Python-based, open-source tool for post-processing hydrodynamical simulations to produce synthetic absorption spectra and related data. Trident} can (i) create absorption-line spectra for any trajectory through a simulated dataset mimicking both background quasar and down-the-barrel configurations, (ii) reproduce the spectral characteristics of common instruments like the Cosmic Origins Spectrograph, (iii) operate across the ultraviolet, optical and infrared using customizable absorption line lists, (iv) trace simulated physical structures directly to spectral features, (v) approximate the presence of ion species absent from the simulation outputs, (vi) generate column density maps for any ion, and (vii) provide support for all major astrophysical hydrodynamical codes. The focus of Trident's development is for using simulated datasets to better interpret observations of the circumgalactic medium (CGM) and intergalactic medium (IGM), but it remains a general tool applicable in other contexts.
• The Astropy Project (http://astropy.org) is, in its own words, "a community effort to develop a single core package for Astronomy in Python and foster interoperability between Python astronomy packages." For five years this project has been managed, written, and operated as a grassroots, self-organized, almost entirely volunteer effort while the software is used by the majority of the astronomical community. Despite this, the project has always been and remains to this day effectively unfunded. Further, contributors receive little or no formal recognition for creating and supporting what is now critical software. This paper explores the problem in detail, outlines possible solutions to correct this, and presents a few suggestions on how to address the sustainability of general purpose astronomical software.
• ### Kinetic energy from supernova feedback in high-resolution galaxy simulations(1410.3822)

June 26, 2015 astro-ph.GA
We describe a new method for adding a prescribed amount of kinetic energy to simulated gas modeled on a cartesian grid by directly altering grid cells' mass and velocity in a distributed fashion. The method is explored in the context of supernova feedback in high-resolution ($\sim 10$ pc) hydrodynamic simulations of galaxy formation. Resolution-dependence is a primary consideration in our application of the method and simulations of isolated explosions (performed at different resolutions) motivate a resolution-dependent scaling for the injected fraction of kinetic energy that we apply in cosmological simulations of a $10^9$ Msun dwarf halo. We find that in high density media ($\gtrsim$ 50 cm$^{-3}$) with coarse resolution ($\gtrsim 4$ pc per cell), results are sensitive to the initial kinetic energy fraction due to early and rapid cooling. In our galaxy simulations, the deposition of small amounts of supernova energy in kinetic form (as little as 1%) has a dramatic impact on the evolution of the system, resulting in an order of magnitude suppression of stellar mass. The overall behavior of the galaxy in the two highest resolution simulations we perform appears to converge. We discuss the resulting distribution of stellar metallicities, an observable sensitive to galactic wind properties, and find that while the new method demonstrates increased agreement with observed systems, significant discrepancies remain, likely due to simplistic assumptions that neglect contributions from Type Ia supernovae and stellar winds.
• ### Cosmological simulations of galaxy formation with cosmic rays(1412.0661)

Dec. 1, 2014 astro-ph.GA
We investigate the dynamical impact of cosmic rays in cosmological simulations of galaxy formation using adaptive-mesh refinement simulations of a $10^{12}$ solar mass halo. In agreement with previous work, a run with only our standard thermal energy feedback model results in a massive spheroid and unrealistically peaked rotation curves. However, the addition of a simple two-fluid model for cosmic rays drastically changes the morphology of the forming disk. We include an isotropic diffusive term and a source term tied to star formation due to (unresolved) supernova-driven shocks. Over a wide range of diffusion coefficients, the CRs generate thin, extended disks with a significantly more realistic (although still not flat) rotation curve. We find that the diffusion of CRs is key to this process, as they escape dense star forming clumps and drive outflows within the more diffuse ISM.
• ### Enzo: An Adaptive Mesh Refinement Code for Astrophysics(1307.2265)

July 8, 2013 astro-ph.IM
This paper describes the open-source code Enzo, which uses block-structured adaptive mesh refinement to provide high spatial and temporal resolution for modeling astrophysical fluid flows. The code is Cartesian, can be run in 1, 2, and 3 dimensions, and supports a wide variety of physics including hydrodynamics, ideal and non-ideal magnetohydrodynamics, N-body dynamics (and, more broadly, self-gravity of fluids and particles), primordial gas chemistry, optically-thin radiative cooling of primordial and metal-enriched plasmas (as well as some optically-thick cooling models), radiation transport, cosmological expansion, and models for star formation and feedback in a cosmological context. In addition to explaining the algorithms implemented, we present solutions for a wide range of test problems, demonstrate the code's parallel performance, and discuss the Enzo collaboration's code development methodology.
• ### Constraints on Hydrodynamical Subgrid Models from Quasar Absorption Line Studies of the Simulated Circumgalactic Medium(1212.2965)

Dec. 12, 2012 astro-ph.CO, astro-ph.GA
Cosmological hydrodynamical simulations of galaxy evolution are increasingly able to produce realistic galaxies, but the largest hurdle remaining is in constructing subgrid models that accurately describe the behavior of stellar feedback. As an alternate way to test and calibrate such models, we propose to focus on the circumgalactic medium. To do so, we generate a suite of adaptive-mesh refinement (AMR) simulations for a Milky-Way-massed galaxy run to z=0, systematically varying the feedback implementation. We then post-process the simulation data to compute the absorbing column density for a wide range of common atomic absorbers throughout the galactic halo, including H I, Mg II, Si II, Si III, Si IV, C IV, N V, O VI, and O VII. The radial profiles of these atomic column densities are compared against several quasar absorption line studies, to determine if one feedback prescription is favored. We find that although our models match some of the observations (specifically those ions with lower ionization strengths), it is particularly difficult to match O VI observations. There is some indication that the models with increased feedback intensity are better matches. We demonstrate that sufficient metals exist in these halos to reproduce the observed column density distribution in principle, but the simulated circumgalactic medium lacks significant multiphase substructure and is generally too hot. Furthermore, we demonstrate the failings of inflow-only models (without energetic feedback) at populating the CGM with adequate metals to match observations even in the presence of multiphase structure. Additionally, we briefly investigate the evolution of the CGM from z=3 to present. Overall, we find that quasar absorption line observations of the gas around galaxies provide a new and important constraint on feedback models.
• ### The GALEX Arecibo SDSS Survey. VI. Second Data Release and Updated Gas Fraction Scaling Relations(1206.3059)

June 15, 2012 astro-ph.CO
We present the second data release from the GALEX Arecibo SDSS Survey (GASS), an ongoing large Arecibo program to measure the HI properties for an unbiased sample of ~1000 galaxies with stellar masses greater than 10^10 Msun and redshifts 0.025<z<0.05. GASS targets are selected from the Sloan Digital Sky Survey (SDSS) spectroscopic and Galaxy Evolution Explorer (GALEX) imaging surveys, and are observed until detected or until a gas mass fraction limit of a few per cent is reached. This second data installment includes new Arecibo observations of 240 galaxies, and marks the 50% of the complete survey. We present catalogs of the HI, optical and ultraviolet parameters for these galaxies, and their HI-line profiles. Having more than doubled the size of the sample since the first data release, we also revisit the main scaling relations of the HI mass fraction with galaxy stellar mass, stellar mass surface density, concentration index, and NUV-r color, as well as the gas fraction plane introduced in our earlier work.
• ### Adaptive Mesh Refinement Simulations of Galaxy Formation: Exploring Numerical and Physical Parameters(1112.0009)

Nov. 30, 2011 astro-ph.CO, astro-ph.GA
We carry out adaptive mesh refinement (AMR) cosmological simulations of Milky-Way mass halos in order to investigate the formation of disk-like galaxies in a {\Lambda}-dominated Cold Dark Matter model. We evolve a suite of five halos to z = 0 and find gaseous-disk formation in all; however, in agreement with previous SPH simulations (that did not include a subgrid feedback model), the rotation curves of all halos are centrally peaked due to a massive spheroidal component. Our standard model includes radiative cooling and star formation, but no feedback. We further investigate this angular momentum problem by systematically modifying various simulation parameters including: (i) spatial resolution, ranging from 1700 to 212 pc; (ii) an additional pressure component to ensure that the Jeans length is always resolved; (iii) low star formation efficiency, going down to 0.1%; (iv) fixed physical resolution as opposed to comoving resolution; (v) a supernova feedback model which injects thermal energy to the local cell; and (vi) a subgrid feedback model which suppresses cooling in the immediate vicinity of a star formation event. Of all of these, we find that only the last (cooling suppression) has any impact on the massive spheroidal component. In particular, a simulation with cooling suppression and feedback results in a rotation curve that, while still peaked, is considerably reduced from our standard runs.
• ### The GALEX Arecibo SDSS Survey. IV. Baryonic Mass-Velocity-Size Relations of Massive Galaxies(1110.4226)

Oct. 19, 2011 astro-ph.CO
We present dynamical scaling relations for a homogeneous and representative sample of ~500 massive galaxies, selected only by stellar mass (>10^10 Msun) and redshift (0.025<z<0.05) as part of the ongoing GALEX Arecibo SDSS Survey. We compare baryonic Tully-Fisher (BTF) and Faber-Jackson (BFJ) relations for this sample, and investigate how galaxies scatter around the best fits obtained for pruned subsets of disk-dominated and bulge-dominated systems. The BFJ relation is significantly less scattered than the BTF when the relations are applied to their maximum samples, and is not affected by the inclination problems that plague the BTF. Disk-dominated, gas-rich galaxies systematically deviate from the BFJ relation defined by the spheroids. We demonstrate that by applying a simple correction to the stellar velocity dispersions that depends only on the concentration index of the galaxy, we are able to bring disks and spheroids onto the same dynamical relation -- in other words, we obtain a generalized BFJ relation that holds for all the galaxies in our sample, regardless of morphology, inclination or gas content, and has a scatter smaller than 0.1 dex. We find that disks and spheroids are offset in the stellar dispersion-size relation, and that the offset is removed when corrected dispersions are used instead. The generalized BFJ relation represents a fundamental correlation between the global dark matter and baryonic content of galaxies, which is obeyed by all (massive) systems regardless of morphology. [abridged]
• ### The GALEX Arecibo SDSS Survey II: The Star Formation Efficiency of Massive Galaxies(1006.5447)

June 28, 2010 astro-ph.CO
We use measurements of the HI content, stellar mass and star formation rates in ~190 massive galaxies with stellar masses greater than 10^10 Msun, obtained from the Galex Arecibo SDSS Survey (GASS) described in Paper I (Catinella et al. 2010) to explore the global scaling relations associated with the bin-averaged ratio of the star formation rate over the HI mass, which we call the HI-based star formation efficiency (SFE). Unlike the mean specific star formation rate, which decreases with stellar mass and stellar mass surface density, the star formation efficiency remains relatively constant across the sample with a value close to SFE = 10^-9.5 yr^-1 (or an equivalent gas consumption timescale of ~3 Gyr). Specifically, we find little variation in SFE with stellar mass, stellar mass surface density, NUV-r color and concentration. We interpret these results as an indication that external processes or feedback mechanisms that control the gas supply are important for regulating star formation in massive galaxies. An investigation into the detailed distribution of SFEs reveals that approximately 5% of the sample shows high efficiencies with SFE > 10^-9 yr^-1, and we suggest that this is very likely due to a deficiency of cold gas rather than an excess star formation rate. Conversely, we also find a similar fraction of galaxies that appear to be gas-rich for their given specific star-formation rate, although these galaxies show both a higher than average gas fraction and lower than average specific star formation rate. Both of these populations are plausible candidates for "transition" galaxies, showing potential for a change (either decrease or increase) in their specific star formation rate in the near future. We also find that 36+/-5% of the total HI mass density and 47+/-5% of the total SFR density is found in galaxies with stellar mass greater than 10^10 Msun. [abridged]
• ### The GALEX Arecibo SDSS Survey. I. Gas Fraction Scaling Relations of Massive Galaxies and First Data Release(0912.1610)

Dec. 9, 2009 astro-ph.CO
We introduce the GALEX Arecibo SDSS Survey (GASS), an on-going large program that is gathering high quality HI-line spectra using the Arecibo radio telescope for an unbiased sample of ~1000 galaxies with stellar masses greater than 10^10 Msun and redshifts 0.025<z<0.05, selected from the SDSS spectroscopic and GALEX imaging surveys. The galaxies are observed until detected or until a low gas mass fraction limit (1.5-5%) is reached. This paper presents the first Data Release, consisting of ~20% of the final GASS sample. We use this data set to explore the main scaling relations of HI gas fraction with galaxy structure and NUV-r colour. A large fraction (~60%) of the galaxies in our sample are detected in HI. We find that the atomic gas fraction decreases strongly with stellar mass, stellar surface mass density and NUV-r colour, but is only weakly correlated with galaxy bulge-to-disk ratio (as measured by the concentration index of the r-band light). We also find that the fraction of galaxies with significant (more than a few percent) HI decreases sharply above a characteristic stellar surface mass density of 10^8.5 Msun kpc^-2. The fraction of gas-rich galaxies decreases much more smoothly with stellar mass. One of the key goals of GASS is to identify and quantify the incidence of galaxies that are transitioning between the blue, star-forming cloud and the red sequence of passively-evolving galaxies. Likely transition candidates can be identified as outliers from the mean scaling relations between gas fraction and other galaxy properties. [abridged]
• ### Lunar Outgassing, Transient Phenomena & the Return to the Moon, II: Predictions and Tests for Outgassing/Regolith Interactions(0909.3832)

Oct. 15, 2009 astro-ph.EP
We follow Paper I with predictions of how gas leaking through the lunar surface could influence the regolith, as might be observed via optical Transient Lunar Phenomena (TLPs) and related effects. We touch on several processes, but concentrate on low and high flow rate extremes, perhaps the most likely. We model explosive outgassing for the smallest gas overpressure at the regolith base that releases the regolith plug above it. This disturbance's timescale and affected area are consistent with observed TLPs; we also discuss other effects. For slow flow, escape through the regolith is prolonged by low diffusivity. Water, found recently in deep magma samples, is unique among candidate volatiles, capable of freezing between the regolith base and surface, especially near the lunar poles. For major outgassing sites, we consider the possible accumulation of water ice. Over geological time ice accumulation can evolve downward through the regolith. Depending on gases additional to water, regolith diffusivity might be suppressed chemically, blocking seepage and forcing the ice zone to expand to larger areas, up to square km scales, again, particularly at high latitudes. We propose an empirical path forward, wherein current and forthcoming technologies provide controlled, sensitive probes of outgassing. The optical transient/outgassing connection, addressed via Earth-based remote sensing, suggests imaging and/or spectroscopy, but aspects of lunar outgassing might be more covert, as indicated above. TLPs betray some outgassing, but does outgassing necessarily produces TLPs? We also suggest more intrusive techniques from radar to in-situ probes. Many of these approaches should be practiced in a pristine lunar atmosphere, before significant confusing signals likely to be produced upon humans returning to the Moon.
• ### Lunar Outgassing, Transient Phenomena and The Return to The Moon, II: Predictions for Interactions between Outgassing and Regolith(0706.3952)

June 27, 2007 astro-ph
We consider the implications from Paper I on how gas leaking through the lunar surface might interact with the regolith, and in what respects this might affect or cause the appearance of optical Transient Lunar Phenomena (TLPs). We consider briefly a range of phenomena, but concentrate at the extremes of high and low gas flow rate, which might represent the more likely behaviors. Extremely fast i.e., explosive, expulsion of gas from the surface is investigated by examining the minimal amount of gas needed to displace a plug of regolith above a site of gaseous overpressure at the regolith's base. The area and timescale of this disturbance, it is consistent with observed TLPs. Furthermore there are several ways in which such an explosion might be expected to change the lunar surface appearance in a way consistent with many TLPs, including production of obscuration, brightening and color changes. At the slow end of the volatile flow range, gas seeping from the interior is retained below the surface for extensive times due to the low diffusivity of regolith material. A special circumstance arises if the volatile flow contains water vapor, because water is uniquely capable of freezing as it passes from the base to the surface of the regolith. For a large TLP site, it is plausible to think of areas on the square-km scale accumulating significant bodies of water ice. Furthermore, as the system evolves over geological time, the ice accumulation zone will evolve downwards into the regolith. Since many reactions possible between the volatiles and regolith, depending on the additional gases besides water, can act to decrease diffusivity in the regolith, it is plausible that the volatiles produce a barrier between the seepage source and vacuum, forcing the ice zone to expand to larger areas.