-
Parallaxes for 331 classical Cepheids, 31 Type II Cepheids and 364 RR Lyrae
stars in common between Gaia and the Hipparcos and Tycho-2 catalogues are
published in Gaia Data Release 1 (DR1) as part of the Tycho-Gaia Astrometric
Solution (TGAS). In order to test these first parallax measurements of the
primary standard candles of the cosmological distance ladder, that involve
astrometry collected by Gaia during the initial 14 months of science operation,
we compared them with literature estimates and derived new period-luminosity
($PL$), period-Wesenheit ($PW$) relations for classical and Type II Cepheids
and infrared $PL$, $PL$-metallicity ($PLZ$) and optical luminosity-metallicity
($M_V$-[Fe/H]) relations for the RR Lyrae stars, with zero points based on
TGAS. The new relations were computed using multi-band
($V,I,J,K_{\mathrm{s}},W_{1}$) photometry and spectroscopic metal abundances
available in the literature, and applying three alternative approaches: (i) by
linear least squares fitting the absolute magnitudes inferred from direct
transformation of the TGAS parallaxes, (ii) by adopting astrometric-based
luminosities, and (iii) using a Bayesian fitting approach. TGAS parallaxes
bring a significant added value to the previous Hipparcos estimates. The
relations presented in this paper represent first Gaia-calibrated relations and
form a "work-in-progress" milestone report in the wait for Gaia-only parallaxes
of which a first solution will become available with Gaia's Data Release 2
(DR2) in 2018.
-
Context. The first Gaia Data Release contains the Tycho-Gaia Astrometric
Solution (TGAS). This is a subset of about 2 million stars for which, besides
the position and photometry, the proper motion and parallax are calculated
using Hipparcos and Tycho-2 positions in 1991.25 as prior information. Aims. We
investigate the scientific potential and limitations of the TGAS component by
means of the astrometric data for open clusters. Methods. Mean cluster parallax
and proper motion values are derived taking into account the error correlations
within the astrometric solutions for individual stars, an estimate of the
internal velocity dispersion in the cluster, and, where relevant, the effects
of the depth of the cluster along the line of sight. Internal consistency of
the TGAS data is assessed. Results. Values given for standard uncertainties are
still inaccurate and may lead to unrealistic unit-weight standard deviations of
least squares solutions for cluster parameters. Reconstructed mean cluster
parallax and proper motion values are generally in very good agreement with
earlier Hipparcos-based determination, although the Gaia mean parallax for the
Pleiades is a significant exception. We have no current explanation for that
discrepancy. Most clusters are observed to extend to nearly 15 pc from the
cluster centre, and it will be up to future Gaia releases to establish whether
those potential cluster-member stars are still dynamically bound to the
clusters. Conclusions. The Gaia DR1 provides the means to examine open clusters
far beyond their more easily visible cores, and can provide membership
assessments based on proper motions and parallaxes. A combined HR diagram shows
the same features as observed before using the Hipparcos data, with clearly
increased luminosities for older A and F dwarfs.
-
List of contributions from the Cherenkov Telescope Array (CTA) Consortium
presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy
(Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
-
SOXS (Son Of X-Shooter) will be a unique spectroscopic facility for the
ESO-NTT 3.5-m telescope in La Silla (Chile), able to cover the optical/NIR band
(350-1750 nm). The design foresees a high-efficiency spectrograph with a
resolution-slit product of ~4,500, capable of simultaneously observing the
complete spectral range 350 - 1750 nm with a good sensitivity, with light
imaging capabilities in the visible band. This paper outlines the status of the
project.
-
List of contributions from the CTA Consortium presented at the 34th
International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The
Netherlands.
-
The VLTI Spectro Imager project aims to perform imaging with a temporal
resolution of 1 night and with a maximum angular resolution of 1
milliarcsecond, making best use of the Very Large Telescope Interferometer
capabilities. To fulfill the scientific goals (see Garcia et. al.), the system
requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H
and K; c) spectral resolution from R= 100 to 12000; and d) internal fringe
tracking on-axis, or off-axis when associated to the PRIMA dual-beam facility.
The concept of VSI consists on 6 sub-systems: a common path distributing the
light between the fringe tracker and the scientific instrument, the fringe
tracker ensuring the co-phasing of the array, the scientific instrument
delivering the interferometric observables and a calibration tool providing
sources for internal alignment and interferometric calibrations. The two
remaining sub-systems are the control system and the observation support
software dedicated to the reduction of the interferometric data. This paper
presents the global concept of VSI science path including the common path, the
scientific instrument and the calibration tool. The scientific combination
using a set of integrated optics multi-way beam combiners to provide
high-stability visibility and closure phase measurements are also described.
Finally we will address the performance budget of the global VSI instrument.
The fringe tracker and scientific spectrograph will be shortly described.
-
We present the optical and cryo-mechanical solutions for the Spectrograph of
VSI (VLTI Spectro-Imager), the second generation near-infrared (J, H and K
bands) interferometric instrument for the VLTI. The peculiarity of this
spectrograph is represented by the Integrated Optics (IO) beam-combiner, a
small and delicate component which is located inside the cryostat and makes VSI
capable to coherently combine 4, 6 or even 8 telescopes. The optics have been
specifically designed to match the IO combiner output with the IR detector
still preserving the needed spatial and spectral sampling, as well as the
required fringe spacing. A compact device that allows us to interchange
spectral resolutions (from R=200 to R=12000), is also presented.
-
The implementation of the simultaneous combination of several telescopes
(from four to eight) available at Very Large Telescope Interferometer (VLTI)
will allow the new generation interferometric instrumentation to achieve
interferometric image synthesis with unprecedented resolution and efficiency.
The VLTI Spectro Imager (VSI) is the proposed second-generation near-infrared
multi-beam instrument for the Very Large Telescope Interferometer, featuring
three band operations (J, H and K), high angular resolutions (down to 1.1
milliarcsecond) and high spectral resolutions. VSI will be equipped with its
own internal Fringe Tracker (FT), which will measure and compensate the
atmospheric perturbations to the relative beam phase, and in turn will provide
stable and prolonged observing conditions down to the magnitude K=13 for the
scientific combiner. In its baseline configuration, VSI FT is designed to
implement, from the very start, the minimum redundancy combination in a nearest
neighbor scheme of six telescopes over six baselines, thus offering better
options for rejection of large intensity or phase fluctuations over each beam,
due to the symmetric set-up. The planar geometry solution of the FT beam
combiner is devised to be easily scalable either to four or eight telescopes,
in accordance to the three phase development considered for VSI. The proposed
design, based on minimum redundancy combination and bulk optics solution, is
described in terms of opto-mechanical concept, performance and key operational
aspects.
-
The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument
of the Very Large Telescope Interferometer providing the ESO community with
spectrally-resolved, near-infrared images at angular resolutions down to 1.1
milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13
will be imaged without requiring a brighter nearby reference object. The unique
combination of high-dynamic-range imaging at high angular resolution and high
spectral resolution enables a scientific program which serves a broad user
community and at the same time provides the opportunity for breakthroughs in
many areas of astrophysic including: probing the initial conditions for planet
formation in the AU-scale environments of young stars; imaging convective cells
and other phenomena on the surfaces of stars; mapping the chemical and physical
environments of evolved stars, stellar remnants, and stellar winds; and
disentangling the central regions of active galactic nuclei and supermassive
black holes. VSI will provide these new capabilities using technologies which
have been extensively tested in the past and VSI requires little in terms of
new infrastructure on the VLTI. At the same time, VSI will be able to make
maximum use of new infrastructure as it becomes available; for example, by
combining 4, 6 and eventually 8 telescopes, enabling rapid imaging through the
measurement of up to 28 visibilities in every wavelength channel within a few
minutes. The current studies are focused on a 4-telescope version with an
upgrade to a 6-telescope one. The instrument contains its own fringe tracker
and tip-tilt control in order to reduce the constraints on the VLTI
infrastructure and maximize the scientific return.
-
Nowadays, compact sources like surfaces of nearby stars, circumstellar
environments of stars from early stages to the most evolved ones and
surroundings of active galactic nuclei can be investigated at milli-arcsecond
scales only with the VLT in its interferometric mode. We propose a
spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe
these sources both over spatial and spectral scales in the near-infrared
domain. This instrument will provide information complementary to what is
obtained at the same time with ALMA at different wavelengths and the extreme
large telescopes.
-
In stellar interferometry, image quality improves significantly with the
inclusion of more telescopes and the use of phase closure. We demonstrate,
using first coherent and then partially coherent white light, a compact and
efficient pair-wise combination of twelve or more beams. The input beams are
lined up and spread through a cylindrical lens into a comb of parallel
ellipses, which interferes with a perpendicular copy of itself to form a matrix
of interferograms between all pairs. The diagonal elements show interference of
each beam with itself, for in-tensity calibration. The measured white-light
visibilities were high and stable.
Parallaxes for 331 classical Cepheids, 31 Type II Cepheids and 364 RR Lyrae stars in common between Gaia and the Hipparcos and Tycho-2 catalogues are published in Gaia Data Release 1 (DR1) as part of the Tycho-Gaia Astrometric Solution (TGAS). In order to test these first parallax measurements of the primary standard candles of the cosmological distance ladder, that involve astrometry collected by Gaia during the initial 14 months of science operation, we compared them with literature estimates and derived new period-luminosity ($PL$), period-Wesenheit ($PW$) relations for classical and Type II Cepheids and infrared $PL$, $PL$-metallicity ($PLZ$) and optical luminosity-metallicity ($M_V$-[Fe/H]) relations for the RR Lyrae stars, with zero points based on TGAS. The new relations were computed using multi-band ($V,I,J,K_{\mathrm{s}},W_{1}$) photometry and spectroscopic metal abundances available in the literature, and applying three alternative approaches: (i) by linear least squares fitting the absolute magnitudes inferred from direct transformation of the TGAS parallaxes, (ii) by adopting astrometric-based luminosities, and (iii) using a Bayesian fitting approach. TGAS parallaxes bring a significant added value to the previous Hipparcos estimates. The relations presented in this paper represent first Gaia-calibrated relations and form a "work-in-progress" milestone report in the wait for Gaia-only parallaxes of which a first solution will become available with Gaia's Data Release 2 (DR2) in 2018.
Context. The first Gaia Data Release contains the Tycho-Gaia Astrometric Solution (TGAS). This is a subset of about 2 million stars for which, besides the position and photometry, the proper motion and parallax are calculated using Hipparcos and Tycho-2 positions in 1991.25 as prior information. Aims. We investigate the scientific potential and limitations of the TGAS component by means of the astrometric data for open clusters. Methods. Mean cluster parallax and proper motion values are derived taking into account the error correlations within the astrometric solutions for individual stars, an estimate of the internal velocity dispersion in the cluster, and, where relevant, the effects of the depth of the cluster along the line of sight. Internal consistency of the TGAS data is assessed. Results. Values given for standard uncertainties are still inaccurate and may lead to unrealistic unit-weight standard deviations of least squares solutions for cluster parameters. Reconstructed mean cluster parallax and proper motion values are generally in very good agreement with earlier Hipparcos-based determination, although the Gaia mean parallax for the Pleiades is a significant exception. We have no current explanation for that discrepancy. Most clusters are observed to extend to nearly 15 pc from the cluster centre, and it will be up to future Gaia releases to establish whether those potential cluster-member stars are still dynamically bound to the clusters. Conclusions. The Gaia DR1 provides the means to examine open clusters far beyond their more easily visible cores, and can provide membership assessments based on proper motions and parallaxes. A combined HR diagram shows the same features as observed before using the Hipparcos data, with clearly increased luminosities for older A and F dwarfs.
The implementation of the simultaneous combination of several telescopes (from four to eight) available at Very Large Telescope Interferometer (VLTI) will allow the new generation interferometric instrumentation to achieve interferometric image synthesis with unprecedented resolution and efficiency. The VLTI Spectro Imager (VSI) is the proposed second-generation near-infrared multi-beam instrument for the Very Large Telescope Interferometer, featuring three band operations (J, H and K), high angular resolutions (down to 1.1 milliarcsecond) and high spectral resolutions. VSI will be equipped with its own internal Fringe Tracker (FT), which will measure and compensate the atmospheric perturbations to the relative beam phase, and in turn will provide stable and prolonged observing conditions down to the magnitude K=13 for the scientific combiner. In its baseline configuration, VSI FT is designed to implement, from the very start, the minimum redundancy combination in a nearest neighbor scheme of six telescopes over six baselines, thus offering better options for rejection of large intensity or phase fluctuations over each beam, due to the symmetric set-up. The planar geometry solution of the FT beam combiner is devised to be easily scalable either to four or eight telescopes, in accordance to the three phase development considered for VSI. The proposed design, based on minimum redundancy combination and bulk optics solution, is described in terms of opto-mechanical concept, performance and key operational aspects.
The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combination of high-dynamic-range imaging at high angular resolution and high spectral resolution enables a scientific program which serves a broad user community and at the same time provides the opportunity for breakthroughs in many areas of astrophysic including: probing the initial conditions for planet formation in the AU-scale environments of young stars; imaging convective cells and other phenomena on the surfaces of stars; mapping the chemical and physical environments of evolved stars, stellar remnants, and stellar winds; and disentangling the central regions of active galactic nuclei and supermassive black holes. VSI will provide these new capabilities using technologies which have been extensively tested in the past and VSI requires little in terms of new infrastructure on the VLTI. At the same time, VSI will be able to make maximum use of new infrastructure as it becomes available; for example, by combining 4, 6 and eventually 8 telescopes, enabling rapid imaging through the measurement of up to 28 visibilities in every wavelength channel within a few minutes. The current studies are focused on a 4-telescope version with an upgrade to a 6-telescope one. The instrument contains its own fringe tracker and tip-tilt control in order to reduce the constraints on the VLTI infrastructure and maximize the scientific return.
Nowadays, compact sources like surfaces of nearby stars, circumstellar environments of stars from early stages to the most evolved ones and surroundings of active galactic nuclei can be investigated at milli-arcsecond scales only with the VLT in its interferometric mode. We propose a spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe these sources both over spatial and spectral scales in the near-infrared domain. This instrument will provide information complementary to what is obtained at the same time with ALMA at different wavelengths and the extreme large telescopes.