This paper describes the hardware and operations of the Neutrinos at the Main
Injector (NuMI) beam at Fermilab. It elaborates on the design considerations
for the beam as a whole and for individual elements. The most important design
details of individual components are described. Beam monitoring systems and
procedures, including the tuning and alignment of the beam and NuMI long-term
performance, are also discussed.
The Mu2e experiment at Fermilab will search for charged lepton flavor
violation via the coherent conversion process mu- N --> e- N with a sensitivity
approximately four orders of magnitude better than the current world's best
limits for this process. The experiment's sensitivity offers discovery
potential over a wide array of new physics models and probes mass scales well
beyond the reach of the LHC. We describe herein the preliminary design of the
proposed Mu2e experiment. This document was created in partial fulfillment of
the requirements necessary to obtain DOE CD-2 approval.
The latest generation of IPMs installed in the Fermilab Main Injector and
Recycler incorporate a 1 kG permanent magnet, a newly designed high-gain,
rad-tolerant preamp, and a control grid to moderate the charge that is allowed
to arrive on the anode pick-up strips. The control grid is intended to select a
single Booster batch measurement per turn. Initially it is being used to allow
for a faster turn-on of a single, high-intensity cycle in either machine. The
expectation is that this will extend the Micro Channel Plate lifetime, which is
the high-cost consumable in the measurement system. We discuss the new design
and data acquired with this system.