• ### Abundances of Mg and K in the atmospheres of turn-off stars in Galactic globular cluster 47 Tucanae(1804.10033)

April 26, 2018 astro-ph.SR
We determined abundances of Mg and K in the atmospheres of 53 (Mg) and 75 (K) turn-off (TO) stars of the Galactic globular cluster 47 Tuc. The obtained abundances, together with those of Li, O, and Na, were used to search for possible relations between the abundances of K and other light elements, Li, O, Na, and Mg, as well as the connections between the chemical composition of TO stars and their kinematical properties. Abundances of Mg and K were determined using archival VLT FLAMES/GIRAFFE spectra, in combination with the 1D NLTE spectral synthesis methodology. Spectral line profiles were computed with the MULTI code, using ATLAS9 stellar model atmospheres. We also utilized 3D hydrodynamical CO5BOLD and 1D hydrostatic LHD model atmospheres for computing 3D-1D LTE abundance corrections for the spectral lines of Mg and K, in order to assess the influence of convection on their formation in the atmospheres of TO stars. The determined average abundance-to-iron ratios and their RMS variations due to star-to-star abundance spreads were $\langle{\rm[Mg/Fe]}\rangle^{\rm 1D NLTE}=0.47\pm0.12$, and $\langle{\rm [K/Fe]}\rangle^{\rm 1D NLTE}=0.39\pm0.09$. Although the data suggest the possible existence of a weak correlation in the [K/Fe]-[Na/Fe] plane, its statistical significance is low. No statistically significant relations between the abundance of K and other light elements were detected. Also, we did not find any significant correlations or anti-correlations between the [Mg/Fe] and [K/Fe] ratios and projected distance from the cluster center. Similarly, no relations between the absolute radial velocities of individual stars and abundances of Mg and K in their atmospheres were detected. The 3D-1D abundance corrections were found to be small ($\leq 0.1$\,dex) for the lines of Mg and K used in this study, thus indicating that the influence of convection on their formation is small.
• We highlight the power of the Gaia DR2 in studying many fine structures of the Hertzsprung-Russell diagram (HRD). Gaia allows us to present many different HRDs, depending in particular on stellar population selections. We do not aim here for completeness in terms of types of stars or stellar evolutionary aspects. Instead, we have chosen several illustrative examples. We describe some of the selections that can be made in Gaia DR2 to highlight the main structures of the Gaia HRDs. We select both field and cluster (open and globular) stars, compare the observations with previous classifications and with stellar evolutionary tracks, and we present variations of the Gaia HRD with age, metallicity, and kinematics. Late stages of stellar evolution such as hot subdwarfs, post-AGB stars, planetary nebulae, and white dwarfs are also analysed, as well as low-mass brown dwarf objects. The Gaia HRDs are unprecedented in both precision and coverage of the various Milky Way stellar populations and stellar evolutionary phases. Many fine structures of the HRDs are presented. The clear split of the white dwarf sequence into hydrogen and helium white dwarfs is presented for the first time in an HRD. The relation between kinematics and the HRD is nicely illustrated. Two different populations in a classical kinematic selection of the halo are unambiguously identified in the HRD. Membership and mean parameters for a selected list of open clusters are provided. They allow drawing very detailed cluster sequences, highlighting fine structures, and providing extremely precise empirical isochrones that will lead to more insight in stellar physics. Gaia DR2 demonstrates the potential of combining precise astrometry and photometry for large samples for studies in stellar evolution and stellar population and opens an entire new area for HRD-based studies.
• ### Investigation of a sample of carbon-enhanced metal-poor stars observed with FORS and GMOS(1803.09252)

March 25, 2018 astro-ph.SR
Carbon-enhanced metal-poor (CEMP) stars represent a sizeable fraction of all known metal-poor stars in the Galaxy. Their formation and composition remains a significant topic of investigation within the stellar astrophysics community. We analysed a sample of low-resolution spectra of 30 dwarf stars, obtained using the the visual and near UV FOcal Reducer and low dispersion Spectrograph for the Very Large Telescope (FORS/VLT) of the European Southern Observatory (ESO) and the Gemini Multi-Object Spectrographs (GMOS) at the GEMINI telescope, to derive their metallicity and carbon abundance. We derived C and Ca from all spectra, and Fe and Ba from the majority of the stars. We have extended the population statistics of CEMP stars and have confirmed that in general, stars with a high C abundance belonging to the high C band show a high Ba-content (CEMP-s or -r/s), while stars with a normal C-abundance or that are C-rich, but belong to the low C band, are normal in Ba (CEMP-no).
• ### Using the CIFIST grid of CO5BOLD 3D model atmospheres to study the effects of stellar granulation on photometric colours. I. Grids of 3D corrections in the UBVRI, 2MASS, Hipparcos, Gaia, and SDSS systems(1712.00024)

Feb. 19, 2018 astro-ph.SR
The atmospheres of cool stars are temporally and spatially inhomogeneous due to the effects of convection.The influence of this inhomogeneity, referred to as granulation, on colours has never been investigated over a large range of effective temperatures and gravities. We aim to study, in a quantitative way, the impact of granulation on colours. We use the CIFIST grid of CO5BOLD hydrodynamical models to compute emerging fluxes. These in turn are used to compute theoretical colours in the UBVRI,2MASS,Hipparcos,Gaia and SDSS systems. Every CO5BOLD model has a corresponding one dimensional (1D) plane-parallel LHD model computed for the same atmospheric parameters, which we used to define a "3D correction" that can be applied to colours computed from fluxes computed from any 1D model atmosphere code. The 3D corrections on colours are generally small, of the order of a few hundredths of a magnitude, yet they are far from negligible. We find that ignoring granulation effects can lead to underestimation of Teff by up to 200K and overestimation of gravity by up to 0.5dex, when using colours as diagnostics. We have identified a major shortcoming in how scattering is treated in the current version of the CIFIST grid, which could lead to offsets of the order 0.01mag, especially for colours involving blue and UV bands.We have investigated the Gaia and Hipparcos photometric systems and found that the (G-H_p),(BP-RP) diagram is immune to the effects of granulation. In addition, we point to the potential of the RVS photometry as a metallicity diagnostic. Our investigation shows that the effects of granulation should not be neglected if one wants to use colours as diagnostics of the stellar parameters of F,G,K stars. A limitation is that scattering is treated as true absorption in our current computations, thus our 3D corrections are likely an upper limit to the true effect. (Abridged)
• ### Using the CIFIST grid of CO5BOLD 3D model atmospheres to study the effects of stellar granulation on photometric colours. II. The role of convection accross the H-R diagram(1802.00073)

Jan. 31, 2018 astro-ph.SR
We studied the influence of convection on the spectral energy distributions, photometric magnitudes, and colour indices of different types of stars across the H-R diagram. The 3D hydrodynamical CO5BOLD, averaged <3D>, and 1D hydrostatic LHD model atmospheres were used to compute spectral energy distributions of stars on the main sequence (MS), main sequence turn-off (TO), subgiant branch (SGB), and red giant branch (RGB), in each case at two different effective temperatures and two metallicities, [M/H]=0.0 and -2.0. Using the obtained spectral energy distributions, we calculated photometric magnitudes and colour indices in the broad-band Johnson-Cousins $UBVRI$ and 2MASS $JHK_{\rm s}$, and the medium-band Str\"{o}mgren $uvby$ photometric systems. The 3D-1D differences in photometric magnitudes and colour indices are small in both photometric systems and typically do not exceed $\pm0.03$ mag. Only in the case of the coolest giants located on the upper RGB are the differences in the $U$ and $u$ bands able reach $\approx-0.2$ mag at [M/H]=0.0 and $\approx-0.1$ mag at [M/H]=-2.0. Generally, the 3D-1D differences are largest in the blue-UV part of the spectrum and decrease towards longer wavelengths. They are also sensitive to the effective temperature and are significantly smaller in hotter stars. Metallicity also plays a role and leads to slightly larger 3D-1D differences at [M/H]=0.0. All these patterns are caused by a complex interplay between the radiation field, opacities, and horizontal temperature fluctuations that occur due to convective motions in stellar atmospheres. Although small, the 3D-1D differences in the magnitudes and colour indices are nevertheless comparable to or larger than typical photometric uncertainties and may therefore cause non-negligible systematic differences in the estimated effective temperatures.
• ### TOPoS: IV. Chemical abundances from high-resolution observations of seven EMP stars(1801.03935)

Extremely metal-poor stars provide us with indirect information on the first generations of massive stars. The TOPoS survey has been designed to increase the census of these stars and to provide a chemical inventory that is as detailed as possible. Seven of the most iron-poor stars have been observed with the UVES spectrograph at the ESO VLT Kueyen 8.2m telescope to refine their chemical composition. We analysed the spectra based on 1D LTE model atmospheres, but also used 3D hydrodynamical simulations of stellar atmospheres. We measured carbon in six of the seven stars: all are carbon-enhanced and belong to the low-carbon band, defined in the TOPoS II paper. We measured lithium (A(Li)=1.9) in the most iron-poor star (SDSS J1035+0641, [Fe/H] < -5.2 ). We were also able to measure Li in three stars at [Fe/H]~ -4.0, two of which lie on the Spite plateau. We confirm that SDSS J1349+1407 is extremely rich in Mg, but not in Ca. It is also very rich in Na. Several of our stars are characterised by low alpha-to-iron ratios. The lack of high-carbon band stars at low metallicity can be understood in terms of evolutionary timescales of binary systems. The detection of Li in SDSS J1035+0641 places a strong constraint on theories that aim at solving the cosmological lithium problem. The Li abundance of the two warmer stars at [Fe/H]~ -4.0 places them on the Spite plateau, while the third, cooler star, lies below. We argue that this suggests that the temperature at which Li depletion begins increases with decreasing [Fe/H]. SDSS J1349+1407 may belong to a class of Mg-rich EMP stars. We cannot assess if there is a scatter in alpha-to-iron ratios among the EMP stars or if there are several discrete populations. However, the existence of stars with low alpha-to-iron ratios is supported by our observations.
• ### Galactic evolution of Copper in the light of NLTE computations(1709.08619)

Sept. 25, 2017 astro-ph.GA, astro-ph.SR
We have developed a model atom for Cu with which we perform statistical equilibrium computations that allow us to compute the line formation of Cu I lines in stellar atmospheres without assuming Local Thermodynamic Equilibrium (LTE). We validate this model atom by reproducing the observed line profiles of the Sun, Procyon and eleven metal-poor stars. Our sample of stars includes both dwarfs and giants. Over a wide range of stellar parameters we obtain excellent agreement among different Cu I lines. The eleven metal-poor stars have iron abundances in the range -4.2 <= [Fe/H] <= -1.4, the weighted mean of the [Cu/Fe] ratios is -0.22 dex, with a scatter of -0.15 dex. This is very different from the results from LTE analysis (the difference between NLTE and LTE abundances reaches 1 dex) and in spite of the small size of our sample it prompts for a revision of the Galactic evolution of Cu.
• ### Carbon-enhanced metal-poor 3D model atmospheres(1708.05686)

Aug. 17, 2017 astro-ph.SR
We present our latest 3D model atmospheres for carbon-enhanced metal-poor (CEMP) stars computed with the CO5BOLD code. The stellar parameters are representative of hot turn-off objects (Teff ~ 6250 K, log g=4.0, [Fe/H]=-3.0). The main purpose of these models is to investigate the role of 3D effects on synthetic spectra of the CH G-band (4140-4400 A), the CN BX-band (3870-3890 A), and several UV OH transitions (3122-3128 A). By comparison with the synthetic spectra from standard 1D model atmospheres (assuming local thermodynamic equilibrium, LTE), we derive 3D abundance corrections for carbon and oxygen of up to -0.5 and -0.7 dex, respectively.
• ### Abundances of Na, Mg, and K in the atmospheres of red giant branch stars of Galactic globular cluster 47 Tucanae(1704.02751)

July 27, 2017 astro-ph.SR
We study the abundances of Na, Mg, and K in the atmospheres of 32 RGB stars in the Galactic globular cluster (GGC) 47 Tuc, with the goal to investigate the possible existence of Na-K and Mg-K correlations/anti-correlations, similar to those that were recently discovered in two other GGCs, NGC 2419 and 2808. The abundances of K, Na, and Mg were determined using high-resolution 2df spectra obtained with the AAT. The 1D NLTE abundance estimates were obtained using 1D hydrostatic ATLAS9 model atmospheres and spectral line profiles synthesized with the MULTI package. We also used 3D hydrodynamical CO5BOLD and 1D hydrostatic LHD model atmospheres to compute 3D-1D LTE abundance corrections, $\Delta_{\rm 3D-1D~LTE}$, for the spectral lines of Na, Mg, and K used in our study. These abundance corrections were used to understand the role of convection in the formation of spectral lines, as well as to estimate the differences in the abundances obtained with the 3D hydrodynamical and 1D hydrostatic model atmospheres. The average element-to-iron abundance ratios and their RMS variations due to star-to-star abundance spreads determined in our sample of RGB stars were $\langle{\rm [Na/Fe]}\rangle^{\rm 1D~NLTE}=0.42\pm0.13$, $\langle{\rm [Mg/Fe]}\rangle^{\rm 1D~NLTE}=0.41\pm0.11$, and $\langle{\rm [K/Fe]}\rangle^{\rm 1D~NLTE}=0.05\pm0.14$. We found no statistically significant relations between the abundances of the three elements studied here. Also, there were no abundance trends with the distance from the cluster center, nor any statistically significant relations between the abundance/abundance ratios and absolute radial velocities of individual stars. All these facts suggest the similarity of K abundance in stars that belong to different generations in 47 Tuc which, in turn, may hint that evolution of K in this particular cluster was unrelated to the nucleosynthesis of Na and/or Mg.
• ### New ultra metal-poor stars from SDSS: follow-up GTC medium-resolution spectroscopy(1706.04179)

June 29, 2017 astro-ph.GA, astro-ph.SR
Context. The first generation of stars formed in the Galaxy left behind the chemical signatures of their nucleosynthesis in the interstellar medium, visible today in the atmospheres of low-mass stars formed afterwards. Sampling the chemistry of low-mass provides insight into the first stars. Aims. We aim to increase the samples of stars with extremely low metal abundances, identifying ultra metal-poor stars from spectra with modest spectral resolution and signal-to-noise ratio (S/N). Achieving this goal involves deriving reliable metallicities and carbon abundances from such spectra. Methods. We carry-out follow-up observations of faint, V>19, metal-poor candidates selected from SDSS spectroscopy and observed with OSIRIS at GTC. The SDSS and follow-up OSIRIS spectra have been analyzed using the FERRE code to derive effective temperatures, surface gravities, metallicities and carbon abundances. In addition, a well-known extremely metal-poor star has been included in our sample to calibrate the analysis methodology. Results. We have observed and analyzed five metal-poor candidates from modest-quality SDSS spectra. All stars in our sample have been confirmed as extremely metal-poor stars, in the [Fe/H]<-3.3 regime. We report the recognition of J173403+644632, a carbon-enhanced ultra metal-poor dwarf star with [Fe/H]=-4.3 and [C/Fe]=+3.1.
• ### The Pristine survey II: a sample of bright stars observed with FEROS(1705.10280)

May 29, 2017 astro-ph.GA, astro-ph.SR
Extremely metal-poor (EMP) stars are old objects formed in the first Gyr of the Universe. They are rare and, to select them, the most successful strategy has been to build on large and low-resolution spectroscopic surveys. The combination of narrow- and broad band photometry provides a powerful and cheaper alternative to select metal-poor stars. The on-going Pristine Survey is adopting this strategy, conducting photometry with the CFHT MegaCam wide field imager and a narrow-band filter centred at 395.2 nm on the CaII-H and -K lines. In this paper we present the results of the spectroscopic follow-up conducted on a sample of 26 stars at the bright end of the magnitude range of the Survey (g<=15), using FEROS at the MPG/ESO 2.2 m telescope. From our chemical investigation on the sample, we conclude that this magnitude range is too bright to use the SDSS gri bands, which are typically saturated. Instead the Pristine photometry can be usefully combined with the APASS gri photometry to provide reliable metallicity estimates.
• Parallaxes for 331 classical Cepheids, 31 Type II Cepheids and 364 RR Lyrae stars in common between Gaia and the Hipparcos and Tycho-2 catalogues are published in Gaia Data Release 1 (DR1) as part of the Tycho-Gaia Astrometric Solution (TGAS). In order to test these first parallax measurements of the primary standard candles of the cosmological distance ladder, that involve astrometry collected by Gaia during the initial 14 months of science operation, we compared them with literature estimates and derived new period-luminosity ($PL$), period-Wesenheit ($PW$) relations for classical and Type II Cepheids and infrared $PL$, $PL$-metallicity ($PLZ$) and optical luminosity-metallicity ($M_V$-[Fe/H]) relations for the RR Lyrae stars, with zero points based on TGAS. The new relations were computed using multi-band ($V,I,J,K_{\mathrm{s}},W_{1}$) photometry and spectroscopic metal abundances available in the literature, and applying three alternative approaches: (i) by linear least squares fitting the absolute magnitudes inferred from direct transformation of the TGAS parallaxes, (ii) by adopting astrometric-based luminosities, and (iii) using a Bayesian fitting approach. TGAS parallaxes bring a significant added value to the previous Hipparcos estimates. The relations presented in this paper represent first Gaia-calibrated relations and form a "work-in-progress" milestone report in the wait for Gaia-only parallaxes of which a first solution will become available with Gaia's Data Release 2 (DR2) in 2018.
• ### Lithium abundance and 6Li/7Li ratio in the active giant HD123351 I. A comparative analysis of 3D and 1D NLTE line-profile fits(1704.06460)

April 21, 2017 astro-ph.SR
Current three-dimensional (3D) hydrodynamical model atmospheres together with NLTE spectrum synthesis, permit to derive reliable atomic and isotopic chemical abundances from high-resolution stellar spectra. Not much is known about the presence of the fragile 6Li isotope in evolved solar-metallicity RGB stars, not to mention its production in magnetically active targets like HD123351. From fits of the observed CFHT spectrum with synthetic line profiles based on 1D and 3D model atmospheres, we seek to estimate the abundance of the 6Li isotope and to place constraints on its origin. We derive A(Li) and the 6Li/7Li isotopic ratio by fitting different synthetic spectra to the Li-line region of a high-resolution CFHT spectrum (R=120 000, S/R=400). The synthetic spectra are computed with four different line lists, using in parallel 3D hydrodynamical CO5BOLD and 1D LHD model atmospheres and treating the line formation of the lithium components in non-LTE (NLTE). We find A(Li)=1.69+/-0.11 dex and 6Li/7Li=8.0+/-4.4 % in 3D-NLTE, using the line list of Mel\'endez et al. (2012), updated with new atomic data for V I, which results in the best fit of the lithium line profile of HD123351. Two other line lists lead to similar results but with inferior fit qualities. Our 2-sigma detection of the 6Li isotope is the result of a careful statistical analysis and the visual inspection of each achieved fit. Since the presence of a significant amount of 6Li in the atmosphere of a cool evolved star is not expected in the framework of standard stellar evolution theory, non-standard, external lithium production mechanisms, possibly related to stellar activity or a recent accretion of rocky material, need to be invoked to explain the detection of 6Li in HD123351.
• ### The Gaia-ESO Survey: Galactic evolution of sulphur and zinc(1704.02981)

April 10, 2017 astro-ph.GA, astro-ph.SR
Due to their volatile nature, when sulfur and zinc are observed in external galaxies, their determined abundances represent the gas-phase abundances in the interstellar medium. This implies that they can be used as tracers of the chemical enrichment of matter in the Universe at high redshift. Comparable observations in stars are more difficult and, until recently, plagued by small number statistics. We wish to exploit the Gaia ESO Survey (GES) data to study the behaviour of sulfur and zinc abundances of a large number of Galactic stars, in a homogeneous way. By using the UVES spectra of the GES sample, we are able to assemble a sample of 1301 Galactic stars, including stars in open and globular clusters in which both sulfur and zinc were measured. We confirm the results from the literature that sulfur behaves as an alpha-element. We find a large scatter in [Zn/Fe] ratios among giant stars around solar metallicity. The lower ratios are observed in giant stars at Galactocentric distances less than 7.5 kpc. No such effect is observed among dwarf stars, since they do not extend to that radius. Given the sample selection, giants and dwarfs are observed at different Galactic locations, and it is plausible, and compatible with simple calculations, that Zn-poor giants trace a younger population more polluted by SN Ia yields. It is necessary to extend observations in order to observe both giants and dwarfs at the same Galactic location. Further theoretical work on the evolution of zinc is also necessary.
• Context. The first Gaia Data Release contains the Tycho-Gaia Astrometric Solution (TGAS). This is a subset of about 2 million stars for which, besides the position and photometry, the proper motion and parallax are calculated using Hipparcos and Tycho-2 positions in 1991.25 as prior information. Aims. We investigate the scientific potential and limitations of the TGAS component by means of the astrometric data for open clusters. Methods. Mean cluster parallax and proper motion values are derived taking into account the error correlations within the astrometric solutions for individual stars, an estimate of the internal velocity dispersion in the cluster, and, where relevant, the effects of the depth of the cluster along the line of sight. Internal consistency of the TGAS data is assessed. Results. Values given for standard uncertainties are still inaccurate and may lead to unrealistic unit-weight standard deviations of least squares solutions for cluster parameters. Reconstructed mean cluster parallax and proper motion values are generally in very good agreement with earlier Hipparcos-based determination, although the Gaia mean parallax for the Pleiades is a significant exception. We have no current explanation for that discrepancy. Most clusters are observed to extend to nearly 15 pc from the cluster centre, and it will be up to future Gaia releases to establish whether those potential cluster-member stars are still dynamically bound to the clusters. Conclusions. The Gaia DR1 provides the means to examine open clusters far beyond their more easily visible cores, and can provide membership assessments based on proper motions and parallaxes. A combined HR diagram shows the same features as observed before using the Hipparcos data, with clearly increased luminosities for older A and F dwarfs.
• ### An in-depth spectroscopic examination of molecular bands from 3D hydrodynamical model atmospheres. II. Carbon-enhanced metal-poor 3D model atmospheres(1701.09102)

Jan. 31, 2017 astro-ph.SR
Context. Tighter constraints on metal-poor stars we observe are needed to better understand the chemical processes of the early Universe. Computing a stellar spectrum in 3D allows one to model complex stellar behaviours, which cannot be replicated in 1D. Aims. We examine the effect that the intrinsic CNO abundances have on a 3D model structure and the resulting 3D spectrum synthesis. Methods. Model atmospheres were computed in 3D for three distinct CNO chemical compositions using the CO 5 BOLD model atmosphere code, and their internal structures were examined. Synthetic spectra were computed from these models using Linfor3D and they were compared. New 3D abundance corrections for the G-band and a selection of UV OH lines were also computed. Results. The varying CNO abundances change the metal content of the 3D models. This had an effect on the model structure and the resulting synthesis. However, it was found that the C/O ratio had a larger effect than the overall metal content of a model. Conclusions. Our results suggest that varying the C/O ratio has a substantial impact on the internal structure of the 3D model, even in the hot turn-off star models explored here. This suggests that bespoke 3D models, for specific CNO abundances should be sought. Such effects are not seen in 1D at these temperature regimes.
• ### On the computation of eigenfrequencies for equilibrium models including turbulent pressure(1701.07244)

Jan. 25, 2017 astro-ph.SR
The space-borne missions have provided a wealth of highly accurate data. However, our inability to properly model the upper-most region of solar-like stars prevents us from making the best of these observations. This problem is called "surface effect" and a key ingredient to solve it is turbulent pressure for the computation of both the equilibrium models and the oscillations. While 3D hydrodynamic simulations help to include properly the turbulent pressure in the equilibrium models, the way this surface effect is included in the computation of stellar oscillations is still subject to uncertainties. We aim at determining how to properly include the effect of turbulent pressure and its Lagrangian perturbation in the adiabatic computation of the oscillations. We also discuss the validity of the gas-gamma model (GGM) and reduced gamma model (RGM) approximations, which have been used to compute adiabatic oscillations of equilibrium models including turbulent pressure. We use a patched model of the Sun with an inner part constructed by a 1D stellar evolution code (CESTAM) and an outer part by the 3D hydrodynamical code (CO$^5$BOLD). Then, the adiabatic oscillations are computed using the ADIPLS code for the GGM and RGM and with the MAD code imposing the adiabatic condition on an existing time-dependent convection (TDC) formalism. We show that the computation of the oscillations using the TDC formalism in the adiabatic limit improves significantly the agreement with the observed frequencies compared to the GGM and RGM. Of the components of the turbulent pressure perturbation, the perturbation of the density and advection term is found to contribute most to the frequency shift. We propose a formalism to evaluate the frequency shift due to the inclusion of the term with the turbulent pressure perturbation in the variational principle in order to extrapolate our result to other stars.
• ### Enhanced methods for computing spectra from CO5BOLD models using Linfor3D. Molecular bands in metal-poor stars(1610.04427)

Oct. 14, 2016 astro-ph.SR
Molecular features such as the G-band, CN-band and NH-band are important diagnostics for measuring a star's carbon and nitrogen abundances, especially in metal-poor stars where atomic lines are no longer visible in stellar spectra. Unlike atomic transitions, molecular features tend to form in bands, which cover large wavelength regions in a spectrum. While it is a trivial matter to compute carbon and nitrogen molecular bands under the assumption of 1D, it is extremely time consuming in 3D. In this contribution to the 2016 CO5BOLD workshop we review the improvements made to the 3D spectral synthesis code Linfor3D, and discuss the new challenges found when computing molecular features in 3D.
• ### TOPoS: III. An ultra iron-poor multiple CEMP system(1610.04106)

Oct. 13, 2016 astro-ph.GA, astro-ph.SR
One of the primary objectives of the TOPoS survey is to search for the most metal-poor stars. Our search has led to the discovery of one of the most iron-poor objects known, SDSS\,J092912.32+023817.0. This object is a multiple system, in which two components are clearly detected in the spectrum. We have analysed 16 high-resolution spectra obtained using the UVES spectrograph at the ESO 8.2m VLT telescope to measure radial velocities and determine the chemical composition of the system. Cross correlation of the spectra with a synthetic template yields a double-peaked cross-correlation function (CCF) for eight spectra, and in one case there is evidence for the presence of a third peak. Chemical analysis of the spectrum obtained by averaging all the spectra for which the CCF showed a single peak found that the iron abundance is [Fe/H]=-4.97. The system is also carbon enhanced with [C/Fe]=+3.91 (A(C)=7.44). From the permitted oxygen triplet we determined an upper limit for oxygen of [O/Fe]<+3.52 such that C/O>1.3. We are also able to provide more stringent upper limits on the Sr and Ba abundances ([Sr/Fe]<+0.70, and [Ba/Fe]<+1.46, respectively).
• ### A new algorithm for optimizing the wavelength coverage for spectroscopic studies: Spectral Wavelength Optimization Code (SWOC)(1606.00833)

June 2, 2016 astro-ph.SR, astro-ph.IM
The past decade and a half has seen the design and execution of several ground-based spectroscopic surveys, both Galactic and Extra-galactic. Additionally, new surveys are being designed that extend the boundaries of current surveys. In this context, many important considerations must be done when designing a spectrograph for the future. Among these is the determination of the optimum wavelength coverage. In this work, we present a new code for determining the wavelength ranges that provide the optimal amount of information to achieve the required science goals for a given survey. In its first mode, it utilizes a user-defined list of spectral features to compute a figure-of-merit for different spectral configurations. The second mode utilizes a set of flux-calibrated spectra, determining the spectral regions that show the largest differences among the spectra. Our algorithm is easily adaptable for any set of science requirements and any spectrograph design. We apply the algorithm to several examples, including 4MOST, showing the method yields important design constraints to the wavelength regions.
• ### An in-depth spectroscopic examination of molecular bands from 3D hydrodynamical model atmospheres I. Formation of the G-band in metal-poor dwarf stars(1605.07215)

May 23, 2016 astro-ph.SR
Recent developments in the three-dimensional (3D) spectral synthesis code Linfor3D have meant that, for the first time, large spectral wavelength regions, such as molecular bands, can be synthesised with it in a short amount of time. A detailed spectral analysis of the synthetic G-band for several dwarf turn-off-type 3D atmospheres (5850 <= T_eff [K] <= 6550, 4.0 <= log g <= 4.5, -3.0 <= [Fe/H] <= -1.0) was conducted, under the assumption of local thermodynamic equilibrium. We also examine carbon and oxygen molecule formation at various metallicity regimes and discuss the impact it has on the G-band. Using a qualitative approach, we describe the different behaviours between the 3D atmospheres and the traditional one-dimensional (1D) atmospheres and how the different physics involved inevitably leads to abundance corrections, which differ over varying metallicities. Spectra computed in 1D were fit to every 3D spectrum to determine the 3D abundance correction. Early analysis revealed that the CH molecules that make up the G-band exhibited an oxygen abundance dependency; a higher oxygen abundance leads to weaker CH features. Nitrogen abundances showed zero impact to CH formation. The 3D corrections are also stronger at lower metallicity. Analysis of the 3D corrections to the G-band allows us to assign estimations of the 3D abundance correction to most dwarf stars presented in the literature. The 3D corrections suggest that A(C) in CEMP stars with high A(C) would remain unchanged, but would decrease in CEMP stars with lower A(C). It was found that the C/O ratio is an important parameter to the G-band in 3D. Additional testing confirmed that the C/O ratio is an equally important parameter for OH transitions under 3D. This presents a clear interrelation between the carbon and oxygen abundances in 3D atmospheres through their molecular species, which is not seen in 1D.
• ### Lithium spectral line formation in stellar atmospheres. The impact of convection and NLTE effects(1512.08999)

Dec. 30, 2015 astro-ph.SR
Different simplified approaches are used to account for the non-local thermodynamic equilibrium (NLTE) effects with 3D hydrodynamical model atmospheres. In certain cases, chemical abundances are derived in 1D NLTE and corrected for the 3D effects by adding 3D-1D LTE abundance corrections (3D+NLTE approach). Alternatively, average <3D> model atmospheres are sometimes used to substitute for the full 3D hydrodynamical models. We tested whether the results obtained using these simplified schemes (i.e., 3D+NLTE, <3D> NLTE) may reproduce those derived using the full 3D NLTE computations. The tests were made using 3D hydrodynamical CO5BOLD model atmospheres of the main sequence (MS), main sequence turn-off (TO), subgiant (SGB), and red giant branch (RGB) stars, all at [M/H]=0.0 and -2.0. Our goal was to investigate the role of 3D and NLTE effects on the formation of the 670.8 nm lithium line by assessing strengths of synthetic 670.8 nm line profiles, computed using 3D/1D NLTE/LTE approaches. Our results show that Li 670.8 nm line strengths obtained using different methodologies differ only slightly in most of the models at solar metallicity. However, the line strengths predicted with the 3D NLTE and 3D+NLTE approaches become significantly different at subsolar metallicities. At [M/H]=-2.0, this may lead to (3D NLTE)-(3D+NLTE) differences in the predicted lithium abundance of ~0.46 and ~0.31 dex in the TO and RGB stars, respectively. On the other hand, NLTE line strengths computed with the average <3D> and 1D model atmospheres are similar to those obtained with the full 3D NLTE approach for MS, TO, SGB, and RGB stars, at all metallicities; 3D-<3D> and 3D-1D differences in the predicted abundances are always less than ~0.04 dex and ~0.08 dex, respectively. However, neither of the simplified approaches can reliably substitute 3D NLTE spectral synthesis when precision is required.
• ### GIANO Y-band spectroscopy of dwarf stars: Phosphorus, Sulphur, and Strontium abundances(1510.06396)

Oct. 21, 2015 astro-ph.SR
In recent years a number of poorly studied chemical elements, such as phosphorus, sulphur, and strontium, have received special attention as important tracers of the Galactic chemical evolution. By exploiting the capabilities of the infrared echelle spectrograph GIANO mounted at the Telescopio Nazionale Galileo, we acquired high resolution spectra of four Galactic dwarf stars spanning the metallicity range between about one-third and twice the solar value. We performed a detailed feasibility study about the effectiveness of the P, S, and Sr line diagnostics in the Y band between 1.03 and 1.10 microm. Accurate chemical abundances have been derived using one-dimensional model atmospheres computed in local thermodynamic equilibrium (LTE). We computed the line formation assuming LTE for P, while we performed non-LTE analysis to derive S and Sr abundances. We were able to derive phosphorus abundance for three stars and an upper limit for one star, while we obtained the abundance of sulphur and strontium for all of the stars. We find [P/Fe] and [S/Fe] abundance ratios consistent with solar-scaled or slightly depleted values, while the [Sr/Fe] abundance ratios are more scattered (by +/-0.2 dex) around the solar-scaled value. This is fully consistent with previous studies using both optical and infrared spectroscopy. We verified that high-resolution, Y-band spectroscopy as provided by GIANO is a powerful tool to study the chemical evolution of P, S, and Sr in dwarf stars.
• ### Chemical composition of a sample of bright solar-metallicity stars(1510.04269)

Oct. 14, 2015 astro-ph.SR
We present a detailed analysis of seven young stars observed with the spectrograph SOPHIE at the Observatoire de Haute-Provence for which the chemical composition was incomplete or absent in the literature. For five stars, we derived the stellar parameters and chemical compositions using our automatic pipeline optimized for F, G, and K stars, while for the other two stars with high rotational velocity, we derived the stellar parameters by using other information (parallax), and performed a line-by-line analysis. Chromospheric emission-line fluxes from CaII are obtained for all targets. The stellar parameters we derive are generally in good agreement with what is available in the literature. We provide a chemical analysis of two of the stars for the first time. The star HIP 80124 shows a strong Li feature at 670.8 nm implying a high lithium abundance. Its chemical pattern is not consistent with it being a solar sibling, as has been suggested.
• ### Surface-effect corrections for solar-like oscillations using 3D hydrodynamical simulations(1510.00300)

Oct. 1, 2015 astro-ph.SR
The space-borne missions have provided us with a wealth of high-quality observational data that allows for seismic inferences of stellar interiors. This requires the computation of precise and accurate theoretical frequencies, but imperfect modeling of the uppermost stellar layers introduces systematic errors. To overcome this problem, an empirical correction has been introduced by Kjeldsen et al. (2008, ApJ, 683, L175) and is now commonly used for seismic inferences. Nevertheless, we still lack a physical justification allowing for the quantification of the surface-effect corrections. We used a grid of these simulations computed with the CO$^5$BOLD code to model the outer layers of solar-like stars. Upper layers of the corresponding 1D standard models were then replaced by the layers obtained from the horizontally averaged 3D models. The frequency differences between these patched models and the 1D standard models were then calculated using the adiabatic approximation and allowed us to constrain the Kjeldsen et al. power law, as well as a Lorentzian formulation. We find that the surface effects on modal frequencies depend significantly on both the effective temperature and the surface gravity. We further provide the variation in the parameters related to the surface-effect corrections using their power law as well as a Lorentzian formulation. Scaling relations between these parameters and the elevation (related to the Mach number) is also provided. The Lorentzian formulation is shown to be more robust for the whole frequency spectrum, while the power law is not suitable for the frequency shifts in the frequency range above $\nu_{\rm max}$.