-
We report measurements of the photon beam asymmetry $\Sigma$ for the
reactions $\vec{\gamma}p\to p\pi^0$ and $\vec{\gamma}p\to p\eta $ from the
GlueX experiment using a 9 GeV linearly-polarized, tagged photon beam incident
on a liquid hydrogen target in Jefferson Lab's Hall D. The asymmetries,
measured as a function of the proton momentum transfer, possess greater
precision than previous $\pi^0$ measurements and are the first $\eta$
measurements in this energy regime. The results are compared with theoretical
predictions based on $t$-channel, quasi-particle exchange and constrain the
axial-vector component of the neutral meson production mechanism in these
models.
-
The GlueX experiment at Jefferson Lab ran with its first commissioning beam
in late 2014 and the spring of 2015. Data were collected on both plastic and
liquid hydrogen targets, and much of the detector has been commissioned. All of
the detector systems are now performing at or near design specifications and
events are being fully reconstructed, including exclusive production of
$\pi^{0}$, $\eta$ and $\omega$ mesons. Linearly-polarized photons were
successfully produced through coherent bremsstrahlung and polarization transfer
to the $\rho$ has been observed.
-
The primary motivation of the GlueX experiment is to search for and
ultimately study the pattern of gluonic excitations in the meson spectrum
produced in $\gamma p$ collisions. Recent lattice QCD calculations predict a
rich spectrum of hybrid mesons that have both exotic and non-exotic $J^{PC}$,
corresponding to $q\bar{q}$ states ($q=u,$ $d,$ or $s$) coupled with a gluonic
field. A thorough study of the hybrid spectrum, including the identification of
the isovector triplet, with charges 0 and $\pm1$, and both isoscalar members,
$|s\bar{s}\ >$ and $|u\bar{u}\ > + |d\bar{d}\ >$, for each predicted hybrid
combination of $J^{PC}$, may only be achieved by conducting a systematic
amplitude analysis of many different hadronic final states. Detailed studies of
the performance of the \gx detector have indicated that identification of
particular final states with kaons is possible using the baseline detector
configuration. The efficiency of kaon detection coupled with the relatively
lower production cross section for particles containing hidden strangeness will
require a high intensity run in order for analyses of such states to be
feasible. We propose to collect a total of 200 days of physics analysis data at
an average intensity of $5\times 10^7$ tagged photons on target per second.
This data sample will provide an order of magnitude statistical improvement
over the initial GlueX running, which will allow us to begin a program of
studying mesons and baryons containing strange quarks. In addition, the
increased intensity will permit us to study reactions that may have been
statistically limited in the initial phases of GlueX. Overall, this will lead
to a significant increase in the potential for \gx to make key experimental
advances in our knowledge of hybrid mesons and excited $\Xi$ baryons.
-
The primary motivation of the GlueX experiment is to search for and
ultimately study the pattern of gluonic excitations in the meson spectrum
produced in gamma p collisions. Recent lattice QCD calculations predict a rich
spectrum of hybrid mesons that have both exotic and non-exotic JPC,
corresponding to q q-bar (q=u, d, or s) states coupled with a gluonic field. A
thorough study of the hybrid spectrum, including the identification of the
isovector triplet, with charges 0 and +-1, and both isoscalar members, |s
s-bar> and |u u-bar> + |d d-bar>, for each predicted hybrid combination of JPC,
may only be achieved by conducting a systematic amplitude analysis of many
different hadronic final states. We propose the development of a kaon
identification system, supplementing the existing GlueX forward time-of-flight
detector, in order to cleanly select meson and baryon decay channels that
include kaons. Once this detector has been installed and commissioned, we plan
to collect a total of 200 days of physics analysis data at an average intensity
of 5 x 10^7 tagged photons on target per second. This data sample will provide
an order of magnitude statistical improvement over the initial GlueX data set
and, with the developed kaon identification system, a significant increase in
the potential for GlueX to make key experimental advances in our knowledge of
hybrid mesons and Cascade baryons.
-
A control system with the capabilities to combine heteregeneous control
systems or processes into a uniform homogeneous environment is discussed. This
dynamically extensible system is an example of the software system at the agent
level of abstraction. This level of abstraction considers agents as atomic
entities that communicate to implement the functionality of the control system.
Agents engineering aspects are addressed by adopting the domain independent
software standard, formulated by FIPA. Jade core Java classes are used as a
FIPA specification implementation. A special, lightweight, XML RDFS based,
control oriented, ontology markup language is developed to standardize the
description of the arbitrary control system data processor. Control processes,
described in this language, are integrated into the global system at runtime,
without actual programming. Fault tolerance and recovery issues are also
addressed.
-
In an experiment designed to search for and study very rare two-body decay
modes of the K-long, we have observed four examples of the decay K-long -> e+
e-, where the expected background is 0.17+-0.10 events. This observation
translates into a branching fraction of 8.7^{+5.7}_{-4.1} X 10^{-12},
consistent with recent theoretical predictions. This result represents by far
the smallest branching fraction yet measured in particle physics.
-
We present asymmetries between the production of D+ and D- mesons in Fermilab
experiment E791 as a function of xF and pt**2. The data used here consist of
74,000 fully-reconstructed charmed mesons produced by a 500 GeV/c pi- beam on C
and Pt foils. The measurements are compared to results of models which predict
differences between the production of heavy-quark mesons that have a light
quark in common with the beam (leading particles) and those that do not
(non-leading particles). While the default models do not agree with our data,
we can reach agreement with one of them, PYTHIA, by making a limited number of
changes to parameters used.
We report measurements of the photon beam asymmetry $\Sigma$ for the reactions $\vec{\gamma}p\to p\pi^0$ and $\vec{\gamma}p\to p\eta $ from the GlueX experiment using a 9 GeV linearly-polarized, tagged photon beam incident on a liquid hydrogen target in Jefferson Lab's Hall D. The asymmetries, measured as a function of the proton momentum transfer, possess greater precision than previous $\pi^0$ measurements and are the first $\eta$ measurements in this energy regime. The results are compared with theoretical predictions based on $t$-channel, quasi-particle exchange and constrain the axial-vector component of the neutral meson production mechanism in these models.
The GlueX experiment at Jefferson Lab ran with its first commissioning beam in late 2014 and the spring of 2015. Data were collected on both plastic and liquid hydrogen targets, and much of the detector has been commissioned. All of the detector systems are now performing at or near design specifications and events are being fully reconstructed, including exclusive production of $\pi^{0}$, $\eta$ and $\omega$ mesons. Linearly-polarized photons were successfully produced through coherent bremsstrahlung and polarization transfer to the $\rho$ has been observed.
The primary motivation of the GlueX experiment is to search for and ultimately study the pattern of gluonic excitations in the meson spectrum produced in $\gamma p$ collisions. Recent lattice QCD calculations predict a rich spectrum of hybrid mesons that have both exotic and non-exotic $J^{PC}$, corresponding to $q\bar{q}$ states ($q=u,$ $d,$ or $s$) coupled with a gluonic field. A thorough study of the hybrid spectrum, including the identification of the isovector triplet, with charges 0 and $\pm1$, and both isoscalar members, $|s\bar{s}\ >$ and $|u\bar{u}\ > + |d\bar{d}\ >$, for each predicted hybrid combination of $J^{PC}$, may only be achieved by conducting a systematic amplitude analysis of many different hadronic final states. Detailed studies of the performance of the \gx detector have indicated that identification of particular final states with kaons is possible using the baseline detector configuration. The efficiency of kaon detection coupled with the relatively lower production cross section for particles containing hidden strangeness will require a high intensity run in order for analyses of such states to be feasible. We propose to collect a total of 200 days of physics analysis data at an average intensity of $5\times 10^7$ tagged photons on target per second. This data sample will provide an order of magnitude statistical improvement over the initial GlueX running, which will allow us to begin a program of studying mesons and baryons containing strange quarks. In addition, the increased intensity will permit us to study reactions that may have been statistically limited in the initial phases of GlueX. Overall, this will lead to a significant increase in the potential for \gx to make key experimental advances in our knowledge of hybrid mesons and excited $\Xi$ baryons.
The primary motivation of the GlueX experiment is to search for and ultimately study the pattern of gluonic excitations in the meson spectrum produced in gamma p collisions. Recent lattice QCD calculations predict a rich spectrum of hybrid mesons that have both exotic and non-exotic JPC, corresponding to q q-bar (q=u, d, or s) states coupled with a gluonic field. A thorough study of the hybrid spectrum, including the identification of the isovector triplet, with charges 0 and +-1, and both isoscalar members, |s s-bar> and |u u-bar> + |d d-bar>, for each predicted hybrid combination of JPC, may only be achieved by conducting a systematic amplitude analysis of many different hadronic final states. We propose the development of a kaon identification system, supplementing the existing GlueX forward time-of-flight detector, in order to cleanly select meson and baryon decay channels that include kaons. Once this detector has been installed and commissioned, we plan to collect a total of 200 days of physics analysis data at an average intensity of 5 x 10^7 tagged photons on target per second. This data sample will provide an order of magnitude statistical improvement over the initial GlueX data set and, with the developed kaon identification system, a significant increase in the potential for GlueX to make key experimental advances in our knowledge of hybrid mesons and Cascade baryons.