
A novel method to estimate unsteady aerodynamic force coefficients from
pointwise velocity measurements is presented. The methodology is based on a
resolventbased reducedorder model which requires the mean flow to obtain
physical flow structures and pointwise measurement to calibrate their
amplitudes. A computationallyaffordable timestepping methodology to obtain
resolvent modes in nontrivial flow domains is introduced and compared to
previous existing matrixfree and matrixforming strategies. The technique is
applied to the unsteady flow around an inclined square cylinder at low Reynolds
number. The potential of the methodology is demonstrated through good agreement
between the fluctuating pressure distribution on the cylinder and the temporal
evolution of the unsteady lift and drag coefficients predicted by the model and
those computed by direct numerical simulation.

The Large Volume Detector (LVD) has been continuously taking data since 1992
at the INFN Gran Sasso National Laboratory. LVD is sensitive to neutrino bursts
from gravitational stellar collapses with full detection probability over the
Galaxy. We have searched for neutrino bursts in LVD data taken in 7335 days of
operation. No evidence of neutrino signals has been found between June 1992 and
December 2013. The 90% C.L. upper limit on the rate of corecollapse and failed
supernova explosions out to distances of 25 kpc is found to be 0.114/y.

The scientific performance of the Planck Low Frequency Instrument (LFI) after
one year of inorbit operation is presented. We describe the main optical
parameters and discuss photometric calibration, white noise sensitivity, and
noise properties. A preliminary evaluation of the impact of the main systematic
effects is presented. For each of the performance parameters, we outline the
methods used to obtain them from the flight data and provide a comparison with
prelaunch ground assessments, which are essentially confirmed in flight.

We describe the processing of data from the Low Frequency Instrument (LFI)
used in production of the Planck Early Release Compact Source Catalogue
(ERCSC). In particular, we discuss the steps involved in reducing the data from
telemetry packets to cleaned, calibrated, timeordered data (TOD) and frequency
maps. Data are continuously calibrated using the modulation of the temperature
of the cosmic microwave background radiation induced by the motion of the
spacecraft. Noise properties are estimated from TOD from which the sky signal
has been removed using a generalized least square mapmaking algorithm.
Measured 1/f noise kneefrequencies range from 100mHz at 30GHz to a few tens of
mHz at 70GHz. A destriping code (Madam) is employed to combine radiometric data
and pointing information into sky maps, minimizing the variance of correlated
noise. Noise covariance matrices required to compute statistical uncertainties
on LFI and Planck products are also produced. Main beams are estimated down to
the approx 10dB level using Jupiter transits, which are also used for
geometrical calibration of the focal plane.

The DIRAC experiment at CERN has achieved a sizeable production of
$\pi^+\pi^$ atoms and has significantly improved the precision on its lifetime
determination. From a sample of 21227 atomic pairs, a 4% measurement of the
Swave $\pi\pi$ scattering length difference $a_0a_2 =
(.0.2533^{+0.0080}_{0.0078}_\mathrm{stat}.{}^{+0.0078}_{0.0073}_\mathrm{syst})M_{\pi^+}^{1}$
has been attained, providing an important test of Chiral Perturbation Theory.

We give the calibration and scientific performance parameters of the Planck
Low Frequency Instrument (LFI) measured during the ground cryogenic test
campaign. These parameters characterise the instrument response and constitute
our best prelaunch knowledge of the LFI scientific performance. The LFI shows
excellent $1/f$ stability and rejection of instrumental systematic effects;
measured noise performance shows that LFI is the most sensitive instrument of
its kind. The set of measured calibration parameters will be updated during
flight operations through the end of the mission.

In this paper we present the Low Frequency Instrument (LFI), designed and
developed as part of the Planck space mission, the ESA program dedicated to
precision imaging of the cosmic microwave background (CMB). PlanckLFI will
observe the full sky in intensity and polarisation in three frequency bands
centred at 30, 44 and 70 GHz, while higher frequencies (100850 GHz) will be
covered by the HFI instrument. The LFI is an array of microwave radiometers
based on stateoftheart Indium Phosphide cryogenic HEMT amplifiers
implemented in a differential system using blackbody loads as reference
signals. The frontend is cooled to 20K for optimal sensitivity and the
reference loads are cooled to 4K to minimise low frequency noise. We provide an
overview of the LFI, discuss the leading scientific requirements and describe
the design solutions adopted for the various hardware subsystems. The main
drivers of the radiometric, optical and thermal design are discussed, including
the stringent requirements on sensitivity, stability, and rejection of
systematic effects. Further details on the key instrument units and the results
of ground calibration are provided in a set of companion papers.

This paper provides an overview of the Low Frequency Instrument (LFI)
programme within the ESA Planck mission. The LFI instrument has been developed
to produce high precision maps of the microwave sky at frequencies in the range
2777 GHz, below the peak of the cosmic microwave background (CMB) radiation
spectrum. The scientific goals are described, ranging from fundamental
cosmology to Galactic and extragalactic astrophysics. The instrument design and
development are outlined, together with the model philosophy and testing
strategy. The instrument is presented in the context of the Planck mission. The
LFI approach to ground and inflight calibration is described. We also describe
the LFI ground segment. We present the results of a number of tests
demonstrating the capability of the LFI data processing centre (DPC) to
properly reduce and analyse LFI flight data, from telemetry information to
calibrated and cleaned time ordered data, sky maps at each frequency (in
temperature and polarization), component emission maps (CMB and diffuse
foregrounds), catalogs for various classes of sources (the Early Release
Compact Source Catalogue and the Final Compact Source Catalogue). The
organization of the LFI consortium is briefly presented as well as the role of
the core team in data analysis and scientific exploitation. All tests carried
out on the LFI flight model demonstrate the excellent performance of the
instrument and its various subunits. The data analysis pipeline has been tested
and its main steps verified. In the first three months after launch, the
commissioning, calibration, performance, and verification phases will be
completed, after which Planck will begin its operational life, in which LFI
will have an integral part.

We obtain a set of generalized eigenvectors that provides a generalized
spectral decomposition for a given unitary representation of a commutative,
locally compact topological group. These generalized eigenvectors are
functionals belonging to the dual space of a rigging on the space of square
integrable functions on the character group. These riggings are obtained
through suitable spectral measure spaces.

Misra, Prigogine and Courbage (MPC) demonstrated the possibility of obtaining
stochastic Markov processes from deterministic dynamics simply through a
"change of representation" which involves no loss of information provided the
dynamical system under consideration has a suitably high degree of instability
of motion. From a mathematical point of view, MPC theory is a theory of
positivity preserving quasiaffine transformations that intertwine the unitary
groups associated with deterministic dynamics to contraction semigroups
associated with stochastic Markov processes. In this work, dropping the
positivity condition, a characterization of the contraction semigroups induced
by quasiaffine transformations, the structure of the unitary groups admitting
such intertwining relations and a prototype for the quasiaffinities are given
on the basis of the Sz.NagyFoia\c{s} dilation theory. The results are applied
to MPC theory in the context of statistical mechanics.

For classical dynamical systems time operators are introduced as selfadjoint
operators satisfying the so called weak Weyl relation with the unitary groups
of time evolution. Dynamical systems with time operators are intrinsically
irreversible because they admit Lyapounov operators as functions of the time
operator. For quantum systems selfadjoint time operators are defined in the
same way or as dilations of symmetric ones dealing with the timeenergy
uncertainty relation, times of occurrence or survival probabilities. This work
tackles the question of the existence of selfadjoint time operators on the
basis of the HalmosHelson theory of invariant subspaces, the Sz.NagyFoias
dilation theory and the MisraPrigogineCourbage theory of irreversibility. It
is shown that the existence of a selfadjoint time operator for a unitary
evolution is equivalent to the intrinsic irreversibility of the evolution plus
the existence of a simply invariant subspace or a rigid operatorvalued
function for its Sz.NagyFoias functional model. An extensive set of
equivalent conditions to the existence of selfadjoint time operators can be
obtained from these results. Such conditions are written in terms of
Schr\"odinger couples, the Weyl commutation relation, incoming and outgoing
subspaces, innovation processes, LaxPhillips scattering processes, and
translation and spectral representations. As an example, the selfadjoint
extension of the quantum AharonovBohm timeofarrival operator is studied.

Generalized eigenfunctions may be regarded as vectors of a basis in a
particular direct integral of Hilbert spaces or as elements of the antidual
space $\Phi^\times$ in a convenient Gelfand triplet
$\Phi\subseteq{\mathcal\H}\subseteq\Phi^\times$. This work presents a fit
treatment for computational purposes of transformations formulas relating
different generalized bases of eigenfunctions in both frameworks direct
integrals and Gelfand triplets. Transformation formulas look like usual in
Physics literature, as limits of integral functionals but with well defined
kernels. Several approaches are feasible. Here Vitali and martingale approaches
are showed.

In the stochastic limit the resonances play a fundamental role because they
determine the generalized susceptivities which are the building blocks of all
the physical information which survives in this limit. There are two sources of
possible divergences: one related to the singularities of the form factor;
another to the chaoticity of the spectrum. The situation will be illustrated
starting from the example of the discrete part of the hydrogen atom in
interaction with the electromagnetic field.

A liquid isooctane (C$_{8}$H$_{18}$) filled ionization linear array for
radiotherapy quality assurance has been designed, built and tested. The
detector consists of 128 pixels, each of them with an area of 1.7 mm $\times$
1.7 mm and a gap of 0.5 mm. The small pixel size makes the detector ideal for
high gradient beam profiles like those present in Intensity Modulated Radiation
Therapy (IMRT) and radiosurgery. As readout electronics we use the XRay Data
Acquisition System (XDAS) with the Xchip developed by the CCLRC.
Studies concerning the collection efficiency dependence on the polarization
voltage and on the dose rate have been made in order to optimize the device
operation.
In the first tests we have studied dose rate and energy dependences, and
signal reproducibility. Dose rate dependence was found lower than 2.5 % up to 5
Gy min$^{1}$, and energy dependence lower than 2.1 % up to 20 cm depth in
solid water. Output factors and penumbras for several rectangular fields have
been measured with the linear array and were compared with the results obtained
with a 0.125 cm$^{3}$ air ionization chamber and radiographic film,
respectively. Finally, we have acquired profiles for an IMRT field and for a
virtual wedge. These profiles have also been compared with radiographic film
measurements. All the comparisons show a good correspondence. Signal
reproducibility was within a 2% during the test period (around three months).
The device has proved its capability to verify online therapy beams with
good spatial resolution and signal to noise ratio.

We have analyzed data on the free ion yield observed in liquid isooctane
irradiated by Co60 gamma rays within the framework of the Onsager theory about
initial recombination. Several distribution functions describing the electron
thermalization distance have been used and compared with the experimental
results: a delta function, a Gaussian type function and an exponential
function.
A linear dependence between free ion yield and external electric field has
been found at low electric field values (E<1.2 MV/m) in excellent agreement
with the Onsager theory. At higher electric field values we obtain a solution
in power series of the external field using the Onsager theory.

We have constructed and tested a 2d position sensitive parallelplate gas
ionization chamber with scanned charge transfer readout. The scan readout
method described here is based on the development of a new position dependent
charge transfer technique. It has been implemented by using gate strips
perpendicularly oriented to the collector strips. This solution reduces
considerably the number of electronic readout channels needed to cover large
detector areas. The use of a 25 micron thick kapton etched circuit allows high
charge transfer efficiency with a low gating voltage, consequently needing a
very simple commutating circuit. The present prototype covers 8 x 8 cm^2 with a
pixel size of 1.27 x 1.27 mm^2. Depending on the intended use and beam
characteristics a smaller effective pixel is feasible and larger active areas
are possible. This detector can be used for Xray or other continuous beam
intensity profile monitoring.

We present the performance of a new proportional gas detector. Its geometry
consists of a cathode plane with 70x70 micron apertures, crossed by 25 micron
anode strips to which it is attached by 50 micron kapton spacers. In the region
where the avalanche takes place, the anode strips are suspended in the gas
mixture like in a standard wire chamber. This detector exhibits high rate
capability and large gains, introducing very little material.

We describe the first tests with a new proportional gas detector. Its
geometry consists in slits opened in a copper metallized kapton foil with 30
micron anode strips suspended in these openings. In this way the multiplication
process is similar to a standard MSGC. The fundamental difference is the
absence of an insulating substrate around the anode. Also the material budget
is significantly reduced, and the problems related to chargingup or
polarization are removed. Ageing properties of this detector are under study.

The capability of string theories to reproduce at low energy the observed
pattern of quark and lepton masses and mixing angles is examined, focusing the
attention on orbifold constructions, where the magnitude of Yukawa couplings
depends on the values of the deformation parameters which describe the size and
shape of the compactified space. A systematic exploration shows that for $Z_3$,
$Z_4$, $Z_6$I and possibly $Z_7$ orbifolds a correct fit of the physical
fermion masses is feasible. In this way the experimental masses, which are
lowenergy quantities, select a particular size and shape of the compactified
space, which turns out to be very reasonable (in particular the modulus $T$
defining the former is $T=O(1)$). The rest of the $Z_N$ orbifolds are rather
hopeless and should be discarded on the assumption of a minimal $SU(3)\times
SU(2)\times U(1)_Y$ scenario. On the other hand, due to stringy selection
rules, there is no possibility of fitting the KobayashiMaskawa parameters at
the renormalizable level, although it is remarked that this job might well be
done by nonrenormalizable couplings.

We give the complete twisted Yukawa couplings for all the Z_n orbifold
constructions in the most general case, i.e. when orbifold deformations are
considered. This includes a certain number of tasks. Namely, determination of
the allowed couplings, calculation of the explicit dependence of the Yukawa
couplings values on the moduli expectation values (i.e. the parameters
determining the size and shape of the compactified space), etc. The final
expressions are completely explicit, which allows a counting of the DIFFERENT
Yukawa couplings for each orbifold (with and without deformations). This
knowledge is crucial to determine the phenomenological viability of the
different schemes, since it is directly related to the fermion mass hierarchy.
Other facts concerning the phenomenological profile of Z_n orbifolds are also
discussed, e.g. the existence of nondiagonal entries in the fermion mass
matrices, which is related to a nontrivial structure of the
KobayashiMaskawa matrix. Finally some theoretical results are given, e.g. the
noparticipation of (1,2) moduli in twisted Yukawa couplings. Likewise, (1,1)
moduli associated with fixed tori which are involved in the Yukawa coupling, do
not affect the value of the coupling.