• Depleted fully monolithic CMOS pixel detectors using a column based readout architecture for the ATLAS Inner Tracker upgrade(1710.00074)

Sept. 29, 2017 physics.ins-det
Depleted monolithic active pixel sensors (DMAPS), which exploit high voltage and/or high resistivity add-ons of modern CMOS technologies to achieve substantial depletion in the sensing volume, have proven to have high radiation tolerance towards the requirements of ATLAS in the high-luminosity LHC era. Depleted fully monolithic CMOS pixels with fast readout architectures are currently being developed as promising candidates for the outer pixel layers of the future ATLAS Inner Tracker, which will be installed during the phase II upgrade of ATLAS around year 2025. In this work, two DMAPS prototype designs, named LF-MonoPix and TJ-MonoPix, are presented. LF-MonoPix was designed and fabricated in the LFoundry 150~nm CMOS technology, and TJ-MonoPix has been designed in the TowerJazz 180~nm CMOS technology. Both chips employ the same readout architecture, i.e. the column drain architecture, whereas different sensor implementation concepts are pursued. The design of the two prototypes will be described. First measurement results for LF-MonoPix will also be shown.
• Development of a Depleted Monolithic CMOS Sensor in a 150 nm CMOS Technology for the ATLAS Inner Tracker Upgrade(1611.01206)

Nov. 3, 2016 physics.ins-det
The recent R&D focus on CMOS sensors with charge collection in a depleted zone has opened new perspectives for CMOS sensors as fast and radiation hard pixel devices. These sensors, labelled as depleted CMOS sensors (DMAPS), have already shown promising performance as feasible candidates for the ATLAS Inner Tracker (ITk) upgrade, possibly replacing the current passive sensors. A further step to exploit the potential of DMAPS is to investigate the suitability of equipping the outer layers of the ATLAS ITk upgrade with fully monolithic CMOS sensors. This paper presents the development of a depleted monolithic CMOS pixel sensor designed in the LFoundry 150 nm CMOS technology, with the focus on design details and simulation results.
• Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors(1512.08481)

Dec. 28, 2015 physics.ins-det
A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented.
• A novel application of Fiber Bragg Grating (FBG) sensors in MPGD(1512.08529)

Dec. 28, 2015 physics.ins-det
We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active area each, employing three GEM foils per chamber, to be installed in the forward region of the CMS endcap during the long shutdown of LHC in 2108-2019. The large active area of each GE1/1 chamber consists of GEM foils that are mechanically stretched in order to secure their flatness and the consequent uniform performance of the GE1/1 chamber across its whole active surface. So far FBGs have been used in high energy physics mainly as high precision positioning and re-positioning sensors and as low cost, easy to mount, low space consuming temperature sensors. FBGs are also commonly used for very precise strain measurements in material studies. In this work we present a novel use of FBGs as flatness and mechanical tensioning sensors applied to the wide GEM foils of the GE1/1 chambers. A network of FBG sensors have been used to determine the optimal mechanical tension applied and to characterise the mechanical tension that should be applied to the foils. We discuss the results of the test done on a full-sized GE1/1 final prototype, the studies done to fully characterise the GEM material, how this information was used to define a standard assembly procedure and possible future developments.
• CMB power spectrum estimation using wavelets(0807.1113)

July 9, 2008 astro-ph
Observations of the Cosmic Microwave Background (CMB) provide increasingly accurate information about the structure of the Universe at the recombination epoch. Most of this information is encoded in the angular power spectrum of the CMB. The aim of this work is to propose a versatile and powerful method for spectral estimation on the sphere which can easily deal with non-stationarity, foregrounds and multiple experiments with various specifications. In this paper, we use needlets (wavelets) on the sphere to construct natural and efficient spectral estimators for partially observed and beamed CMB with non stationary noise. In the case of a single experiment, we compare this method with Pseudo-$C_\ell$ methods. The performance of the needlet spectral estimators (NSE) compares very favorably to the best Pseudo--$C_\ell$ estimators, over the whole multipole range. On simulations with a simple model (CMB + uncorrelated noise with known variance per pixel + mask), they perform uniformly better. Their distinctive ability to aggregate many different experiments, to control the propagation of errors and to produce a single wide-band error bars is highlighted. The needlet spectral estimator is a powerful, tunable tool which is very well suited to angular power spectrum estimation of spherical data such as incomplete and noisy CMB maps.
• A full sky, low foreground, high resolution CMB map from WMAP(0807.0773)

July 4, 2008 astro-ph
The WMAP satellite has made available high quality maps of the sky in five frequency bands ranging from 22 to 94 GHz, with the main scientific objective of studying the anisotropies of the Cosmic Microwave Background (CMB). These maps, however, contain a mixture of emissions from various astrophysical origins, superimposed on CMB emission. The objective of the present work is to make a high resolution CMB map in which contamination by such galactic and extra-galactic foregrounds, as well as by instrumental noise, is as low as possible. The method used is an implementation of a constrained linear combination of the channels with minimum error variance, and of Wiener filtering, on a frame of spherical wavelets called needlets, allowing localised filtering in both pixel space and harmonic space. We obtain a low contamination low noise CMB map at the resolution of the WMAP W channel, which can be used for a range of scientific studies. We obtain also a Wiener-filtered version with minimal integrated error. The resulting CMB maps offer significantly better rejection of galactic foregrounds than previous CMB maps from WMAP data. They can be considered as the most precise full-sky CMB temperature maps to-date.