• This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.
• ### Ultra-Luminous X-ray Sources in Haro 11 and the Role of X-ray Binaries in Feedback in Lyman-alpha Emitting Galaxies(1507.07900)

July 28, 2015 astro-ph.GA, astro-ph.HE
Lyman Break Analogs (LBA) are local proxies of high-redshift Lyman Break Galaxies (LBG). Studies of nearby starbursts have shown that Lyman continuum and line emission are absorbed by dust and that the Lyman-alpha is resonantly scattered by neutral hydrogen. A source of feedback is required to prevent scattering and allow the Lyman-alpha emission to escape. There are two X-ray point sources embedded in the Lyman Break Analog (LBA) galaxy Haro 11. Haro 11 X-1 is an extremely luminous (L$_{X} \sim 10^{41}$ ergs s$^{-1}$), spatially compact source with a hard X-ray spectrum. Haro 11 X-1 is similar to the extreme Black Hole Binary (BHB) M82 X-1. The hard X-ray spectrum indicates Haro 11 X-1 may be a Black Hole Binary (BHB) in a low accretion state. The very high X-ray luminosity suggests an intermediate mass black hole that could be the seed for formation of a supermassive black hole. Source Haro 11 X-2 has an X-ray luminosity L$_{X} \sim 5\times10^{40}$ ergs s$^{-1}$ and a soft X-ray spectrum. This strongly suggests that Haro 11 X-2 is an X-ray binary in the ultra luminous state. Haro 11 X-2 is coincident with the star forming knot that is the source of the Lyman-alpha emission, raising the possibility that strong winds from X-ray binaries play an important part in injecting mechanical power into the Interstellar Medium (ISM), thus blowing away neutral material from the starburst region and allowing the Lyman-alpha to escape. We suggest that feedback from X-ray binaries may play a significant role in allowing Lyman-alpha emission to escape from galaxies in the early universe.
• ### Status report of the baseline collimation system of CLIC. Part I(1104.2426)

April 13, 2011 physics.acc-ph
Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage by errant beams. In this respect, special attention is paid to the optimisation of the energy collimator design. The material and the physical parameters of the energy collimators are selected to withstand the impact of an entire bunch train. Concerning the betatron collimation section, different aspects of the design have been optimised: the transverse collimation depths have been recalculated in order to reduce the collimator wakefield effects while maintaining a good efficiency in cleaning the undesired beam halo; the geometric design of the spoilers has been reviewed to minimise wakefields; in addition, the optics design has been optimised to improve the collimation efficiency. This report presents the current status of the the post-linac collimation system of CLIC. Part I of this report is dedicated to the study of the CLIC energy collimation system.
• ### Status report of the baseline collimation system of CLIC. Part II(1104.2431)

April 13, 2011 physics.acc-ph
Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage by errant beams. In this respect, special attention is paid to the optimisation of the energy collimator design. The material and the physical parameters of the energy collimators are selected to withstand the impact of an entire bunch train. Concerning the betatron collimation section, different aspects of the design have been optimised: the transverse collimation depths have been recalculated in order to reduce the collimator wakefield effects while maintaining a good efficiency in cleaning the undesired beam halo; the geometric design of the spoilers has been reviewed to minimise wakefields; in addition, the optics design has been optimised to improve the collimation efficiency. This report presents the current status of the the post-linac collimation system of CLIC. Part II is mainly dedicated to the study of the betatron collimation system and collimator wakefield effects.
• ### Results from a Prototype Chicane-Based Energy Spectrometer for a Linear Collider(1011.0337)

Jan. 27, 2011 hep-ex, physics.acc-ph
The International Linear Collider and other proposed high energy e+ e- machines aim to measure with unprecedented precision Standard Model quantities and new, not yet discovered phenomena. One of the main requirements for achieving this goal is a measurement of the incident beam energy with an uncertainty close to 1e-4. This article presents the analysis of data from a prototype energy spectrometer commissioned in 2006--2007 in SLAC's End Station A beamline. The prototype was a 4-magnet chicane equipped with beam position monitors measuring small changes of the beam orbit through the chicane at different beam energies. A single bunch energy resolution close to 5e-4 was measured, which is satisfactory for most scenarios. We also report on the operational experience with the chicane-based spectrometer and suggest ways of improving its performance.
• ### Cavity BPM System Tests for the ILC Spectrometer(0712.1350)

Dec. 9, 2007 physics.ins-det
The main physics programme of the International Linear Collider (ILC) requires a measurement of the beam energy at the interaction point with an accuracy of $10^{-4}$ or better. To achieve this goal a magnetic spectrometer using high resolution beam position monitors (BPMs) has been proposed. This paper reports on the cavity BPM system that was deployed to test this proposal. We demonstrate sub-micron resolution and micron level stability over 20 hours for a $1\m$ long BPM triplet. We find micron-level stability over 1 hour for 3 BPM stations distributed over a $30\m$ long baseline. The understanding of the behaviour and response of the BPMs gained from this work has allowed full spectrometer tests to be carried out.
• ### Design of an interaction region with head-on collisions for the ILC(physics/0609248)

Sept. 28, 2006 physics.acc-ph
An interaction region (IR) with head-on collisions is considered as an alternative to the baseline configuration of the International Linear Collider (ILC) which includes two IRs with finite crossing-angles (2 and 20 mrad). Although more challenging for the beam extraction, the head-on scheme is favoured by the experiments because it allows a more convenient detector configuration, particularly in the forward region. The optics of the head-on extraction is revisited by separating the e+ and e- beams horizontally, first by electrostatic separators operated at their LEP nominal field and then using a defocusing quadrupole of the final focus beam line. In this way the septum magnet is protected from the beamstrahlung power. Newly optimized final focus and extraction optics are presented, including a first look at post-collision diagnostics. The influence of parasitic collisions is shown to lead to a region of stable collision parameters. Disrupted beam and beamstrahlung photon losses are calculated along the extraction elements.
• ### A Test Facility for the International Linear Collider at SLAC End Station A, for Prototypes of Beam Delivery and IR Components(physics/0505171)

May 24, 2005 physics.ins-det
The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out experiments related to collimator wakefields and energy spectrometers. We also plan an interaction region mockup to investigate effects from backgrounds and beam-induced electromagnetic interference.