The standard approach to realize a quantum repeater relies upon probabilistic but heralded entangled state manipulations and the storage of quantum states while waiting for successful events. In the literature on this class of repeaters, calculating repeater rates has typically depended on approximations assuming sufficiently small probabilities. Here we propose an exact and systematic approach including an algorithm based on Markov chain theory to compute the average waiting time (and hence the transmission rates) of quantum repeaters with arbitrary numbers of links. For up to four repeater segments, we explicitly give the exact rate formulae for arbitrary entanglement swapping probabilities. Starting with three segments, we explore schemes with arbitrary (not only doubling) and dynamical (not only predetermined) connections. The effect of finite memory times is also considered and the relative influence of the classical communication (of heralded signals) is shown to grow significantly for larger probabilities. Conversely, we demonstrate that for small swapping probabilities the statistical behavior of the waiting time in a quantum repeater cannot be characterized by its average value alone and additional statistical quantifiers are needed. For large repeater systems, we propose a recursive approach based on exactly but still efficiently computable waiting times of sufficiently small sub-repeaters. This approach leads to better lower bounds on repeater rates compared to existing schemes.

Active dark flows known as recurring slope lineae have been observed on the warmest slopes of equatorial Mars. The morphology, composition and seasonality of the lineae suggest a role of liquid water in their formation. However, internal and atmospheric sources of water appear to be insufficient to sustain the observed slope activity. Experimental evidence suggests that under the low atmospheric pressure at the surface of Mars, gas can flow upwards through porous Martian soil due to thermal creep under surface regions heated by the Sun, and disturb small particles. Here we present numerical simulations to demonstrate that such a dry process involving the pumping of rarefied gas in the Martian soil due to temperature contrasts can explain the formation of the recurring slope lineae. In our simulations, solar irradiation followed by shadow significantly reduces the angle of repose due to the resulting temporary temperature gradients over shaded terrain, and leads to flow at intermediate slope angles. The simulated flow locations are consistent with observed recurring slope lineae that initiate in rough and bouldered terrains with local shadows over the soil. We suggest that this dry avalanche process can explain the formation of the recurring slope lineae on Mars without requiring liquid water or CO2 frost activity.

An efficient numerical method for computing angle-resolved light scattering off periodic arrays is presented. The method combines finite-element discretization with a Schur complement solver. A significant speed-up of the computations in comparison to standard finite-element method computations is observed.

In a previous paper (Chassefi\`ere et al., Icarus 223, 878-891, 2013), we have shown that most volcanic sulfur released to early Mars atmosphere could have been trapped in the cryosphere under the form of CO2-SO2 clathrates. Huge amounts of sulfur, up to the equivalent of a ~1 bar atmosphere of SO2, would have been stored in the Noachian cryosphere, then massively released to the atmosphere during Hesperian due to rapidly decreasing CO2 pressure. It would have resulted in the formation of the large sulfate deposits observed mainly in Hesperian terrains, whereas no or little sulfates are found at the Noachian. In the present paper, we first clarify some aspects of our previous work. We discuss the possibility of a smaller cooling effect of sulfur particles, or even of a net warming effect. We point out the fact that CO2-SO2 clathrates formed through a progressive enrichment of a preexisting reservoir of CO2 clathrates and discuss processes potentially involved in the slow formation of a SO2-rich upper cryosphere. We show that episodes of sudden destabilization at the Hesperian may generate 1000 ppmv of SO2 in the atmosphere and contribute to maintaining the surface temperature above the water freezing point.

The finite-element method is a preferred numerical method when electromagnetic fields at high accuracy are to be computed in nano-optics design. Here, we demonstrate a finite-element method using hp-adaptivity on tetrahedral meshes for computation of electromagnetic fields in a device with rough textures. The method allows for efficient computations on meshes with strong variations in element sizes. This enables to use precise geometry resolution of the rough textures. Convergence to highly accurate results is observed.

Methods for solving Maxwell's equations are integral part of optical metrology and computational lithography setups. Applications require accurate geometrical resolution, high numerical accuracy and/or low computation times. We present a finite-element based electromagnetic field solver relying on unstructured 3D meshes and adaptive hp-refinement. We apply the method for simulating light scattering off arrays of high aspect-ratio nano-posts and FinFETs.

The analysis of the surface texture from the particle (grain size, shape and internal structure) to its organization (surface roughness) provides information on the geological processes. CRISM multi-angular observations (varied emission angles) allow to characterize the surface scattering behavior which depends on the composition but also the material physical properties (e.g., grain size, shape, internal structure, the surface roughness). After an atmospheric correction by the Multi-angle Approach for Retrieval of the Surface Reflectance from CRISM Observations, the surface reflectances at different geometries are analyzed by inverting the Hapke photometric model depending on the single scattering albedo, the 2-term phase function, the macroscopic roughness and the 2-term opposition effects. Surface photometric maps are created to observe the spatial variations of surface scattering properties as a function of geological units at the CRISM spatial resolution (200m/pixel). An application at the Mars Exploration Rover (MER) landing sites located at Gusev Crater and Meridiani Planum where orbital and in situ observations are available, is presented. Complementary orbital observations (e.g. CRISM spectra, THermal EMission Imaging System, High Resolution Imaging Science Experiment images) are used for interpreting the estimated Hapke photometric parameters in terms of physical properties. The in situ observations are used as ground truth to validate the interpretations. Varied scattering properties are observed inside a CRISM observation (5x10km) suggesting that the surfaces are controlled by local geological processes (e.g. volcanic resurfacing, aeolian and impact processes) rather than regional or global. Consistent results with the in situ observations are observed thus validating the approach and the use of photometry for the characterization of Martian surface physical properties.

A numerical investigation of a two dimensional integrated fiber grating coupler capable of exciting several LP fiber modes in both TE and TM polarization is presented. Simulation results and an assessment of the numerical complexity of the 3D, fully vectorial finite element model of the device are shown.

The prospect of realizing building blocks for long-distance quantum communication is a major driving force for the development of advanced nanophotonic devices. Significant progress has been achieved in this field with respect to the fabrication of efficient quantum-dot-based single-photon sources. More recently, even spin-photon entanglement and quantum teleportation have been demonstrated in semiconductor systems. These results are considered as crucial steps towards the realization of a quantum repeater. The related work has almost exclusively been performed on self-assembled quantum dots (QDs) and random device technology. At this point it is clear that further progress in this field towards real applications will rely crucially on deterministic device technologies which will, for instance, enable the processing of bright quantum light sources with pre-defined emission energy. Here we report on enhanced photon-extraction efficiency from monolithically integrated microlenses which are coupled deterministically to single QDs. The microlenses with diameters down to 800 nm were aligned to single QDs by in-situ electron-beam lithography using a low-temperature cathodoluminescence setup. This deterministic device technology allowed us to obtain an enhancement of photon extraction efficiency for QDs integrated into microlenses as compared to QDs in unstructured surfaces. The excellent optical quality of the structures is demonstrated by cathodoluminescence and micro-photoluminescence spectroscopy. A Hong-Ou-Mandel experiment states the emission of single indistinguishable photons.

The Planetary Fourier Spectrometer (PFS) onboard Mars Express (MEx) is the instrument with the highest spectral resolution observing Mars from orbit since January 2004. It permits studying the atmospheric structure, major and minor compounds. The present time version of the calibration is limited by the effects of mechanical vibration, currently not corrected. We proposed here a new approach to correct for the vibrations based on semi-blind deconvolution of the measurements. This new approach shows that a correction can be done efficiently with 85% reduction of the artefacts, in a equivalent manner to the stacking of 10 spectra. Our strategy is not fully automatic due to the dependence on some regularisation parameters. It may be applied on the complete PFS dataset, correcting the large-scale perturbation due to microvibrations for each spectrum independently. This approach is validated on actual PFS data of Short Wavelength Channel (SWC), perturbed by microvibrations. A coherence check can be performed and also validate our approach. Unfortunately, the coherence check can be done only on the first 310 orbits of MEx only, until the laser line has been switch off. More generally, this work may apply to numerically "deshake" Fourier Transform Spectrometer (FTS), widely used in space experiments or in the laboratory.

We use a finite-element method to obtain highly converged results for a nano-optical light scattering setup with a non-periodic geometry.

An overview on recent applications of the finite-element method Maxwell-solver JCMsuite to simulation tasks in nanooptics is given. Numerical achievements in the fields of optical metamaterials, plasmonics, photonic crystal fibers, light emitting devices, solar cells, optical lithography, optical metrology, integrated optics, and photonic crystals are summarized.

A method for automatic computation of parameter derivatives of numerically computed light scattering signals is demonstrated. The finite-element based method is validated in a numerical convergence study, and it is applied to investigate the sensitivity of a scatterometric setup with respect to geometrical parameters of the scattering target. The method can significantly improve numerical performance of design optimization, parameter reconstruction, sensitivity analysis, and other applications.

Nanostructures, like periodic arrays of scatters or low-index gratings, are used to improve the light outcoupling from organic light-emitting diodes (OLED). In order to optimize geometrical and material properties of such structures, simulations of the outcoupling process are very helpful. The finite element method is best suited for an accurate discretization of the geometry and the singular-like field profile within the structured layer and the emitting layer. However, a finite element simulation of the overall OLED stack is often beyond available computer resources. The main focus of this paper is the simulation of a single dipole source embedded into a twofold infinitely periodic OLED structure. To overcome the numerical burden we apply the Floquet transform, so that the computational domain reduces to the unit cell. The relevant outcoupling data are then gained by inverse Flouqet transforming. This step requires a careful numerical treatment as reported in this paper.

The present article proposes an approach to analyze the photometric properties of the surface materials from multi-angle observations acquired by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) on-board the Mars Reconnaissance Orbiter. We estimate photometric parameters using Hapke model in a Bayesian inversion framework. This work also represents a validation of the atmospheric correction provided by the Multi-angle Approach for Retrieval of Surface Reflectance from CRISM Observations (MARS-ReCO) proposed in the companion article.The latter algorithm retrieves photometric curves of surface materials in reflectance units after removing the aerosol contribution. This validation is done by comparing the estimated photometric parameters to those obtained from in situ measurements by Panoramic Camera instrument at the Mars Exploration Rover (MER)-Spirit and MER-Opportunity landing sites. Consistent photometric parameters with those from in situ measurements are found, demonstrating that MARS-ReCO gives access to accurate surface reflectance. Moreover the assumption of a non-Lambertian surface as included in MARS-ReCO is shown to be significantly more precise to estimate surface photometric properties from space in comparison to methods based on a Lambertian surface assumption. In the future, the presented method will allow us to map from orbit the surface bidirectional reflectance and the related photometric parameters in order to characterize the Martian surface.

We present a finite element method (FEM) solver for computation of optical resonance modes in VCSELs. We perform a convergence study and demonstrate that high accuracies for 3D setups can be attained on standard computers. We also demonstrate simulations of thermo-optical effects in VCSELs.

We present a comprehensive study of the influence of the geomagnetic field on the energy estimation of extensive air showers with a zenith angle smaller than $60^\circ$, detected at the Pierre Auger Observatory. The geomagnetic field induces an azimuthal modulation of the estimated energy of cosmic rays up to the ~2% level at large zenith angles. We present a method to account for this modulation of the reconstructed energy. We analyse the effect of the modulation on large scale anisotropy searches in the arrival direction distributions of cosmic rays. At a given energy, the geomagnetic effect is shown to induce a pseudo-dipolar pattern at the percent level in the declination distribution that needs to be accounted for.

The surface detector array of the Pierre Auger Observatory consists of 1600 water-Cherenkov detectors, for the study of extensive air showers (EAS) generated by ultra-high-energy cosmic rays. We describe the trigger hierarchy, from the identification of candidate showers at the level of a single detector, amongst a large background (mainly random single cosmic ray muons), up to the selection of real events and the rejection of random coincidences. Such trigger makes the surface detector array fully efficient for the detection of EAS with energy above $3\times 10^{18}$ eV, for all zenith angles between 0$^\circ$ and 60$^\circ$, independently of the position of the impact point and of the mass of the primary particle. In these range of energies and angles, the exposure of the surface array can be determined purely on the basis of the geometrical acceptance.

In this paper we introduce the concept of Lateral Trigger Probability (LTP) function, i.e., the probability for an extensive air shower (EAS) to trigger an individual detector of a ground based array as a function of distance to the shower axis, taking into account energy, mass and direction of the primary cosmic ray. We apply this concept to the surface array of the Pierre Auger Observatory consisting of a 1.5 km spaced grid of about 1600 water Cherenkov stations. Using Monte Carlo simulations of ultra-high energy showers the LTP functions are derived for energies in the range between 10^{17} and 10^{19} eV and zenith angles up to 65 degs. A parametrization combining a step function with an exponential is found to reproduce them very well in the considered range of energies and zenith angles. The LTP functions can also be obtained from data using events simultaneously observed by the fluorescence and the surface detector of the Pierre Auger Observatory (hybrid events). We validate the Monte-Carlo results showing how LTP functions from data are in good agreement with simulations.

We present the results of an analysis of data recorded at the Pierre Auger Observatory in which we search for groups of directionally-aligned events (or `multiplets') which exhibit a correlation between arrival direction and the inverse of the energy. These signatures are expected from sets of events coming from the same source after having been deflected by intervening coherent magnetic fields. The observation of several events from the same source would open the possibility to accurately reconstruct the position of the source and also measure the integral of the component of the magnetic field orthogonal to the trajectory of the cosmic rays. We describe the largest multiplets found and compute the probability that they appeared by chance from an isotropic distribution. We find no statistically significant evidence for the presence of multiplets arising from magnetic deflections in the present data.

EUV scatterometry is performed on 3D patterns on EUV lithography masks. Numerical simulations of the experimental setup are performed using a rigorous Maxwell solver. Mask geometry is determined by minimizing the difference between experimental results and numerical results for varied geometrical input parameters for the simulations.

Studies of the composition of the highest energy cosmic rays with the Pierre Auger Observatory, including examination of hadronic physics effects on the structure of extensive air showers.

Astrophysical observations of ultra-high-energy cosmic rays with the Pierre Auger Observatory

Technical reports on operations and monitoring of the Pierre Auger Observatory

Ongoing and planned enhancements of the Pierre Auger Observatory