• ### Study of Two-Body $e^+e^- \to B_s^{(*)}\bar{B}_s^{(*)}$ Production in the Energy Range from 10.77 to 11.02 GeV(1609.08749)

Sept. 28, 2016 hep-ex
We report results on the studies of the $e^+e^-\to B_s^{(*)}\bar{B}_s^{(*)}$ processes. The results are based on a $121.4$ fb$^{-1}$ data sample collected with the Belle detector at the center-of-mass energy near the $\Upsilon(10860)$ peak and $16.4$ fb$^{-1}$ of data collected at 19 energy points in the range from 10.77 to 11.02 GeV. We observe a clear $e^+e^-\to\Upsilon(10860)\to B_s^{(*)}\bar{B}_s^{(*)}$ signal, with no statistically significant signal of $e^+e^-\to \Upsilon(11020)\to B_s^{(*)}\bar{B}_s^{(*)}$. The relative production ratio of $B_s^*\bar{B}_s^*$, $B_s\bar{B}_s^{*}$, and $B_s\bar{B}_s$ final states at $\sqrt{s}=10.866$ GeV is measured to be $7:$ $0.856\pm0.106(stat.)\pm0.053(syst.):$ $0.645\pm0.094(stat.)^{+0.030}_{-0.033}(syst.)$. An angular analysis of the $B_s^*\bar{B}_s^*$ final state produced at the $\Upsilon(10860)$ peak is also performed.
• ### Resistive Plate Chamber Digitization in a Hadronic Shower Environment(1604.04550)

April 15, 2016 hep-ex, physics.ins-det
The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, electrons and pions of different energies at the CERN Super Proton Synchrotron. To be able to study the performance of such a calorimeter in future experiments it is important to ensure reliable simulation of its response. In this paper we present our prototype simulation performed with GEANT4 and the digitization procedure achieved with an algorithm called SimDigital. A detailed description of this algorithm is given and the methods to determinate its parameters using muon tracks and electromagnetic showers are explained. The comparison with hadronic shower data shows a good agreement up to 50 GeV. Discrepancies are observed at higher energies. The reasons for these differences are investigated.
• ### Validation of GEANT4 Monte Carlo Models with a Highly Granular Scintillator-Steel Hadron Calorimeter(1306.3037)

June 15, 2014 hep-ex, physics.ins-det
Calorimeters with a high granularity are a fundamental requirement of the Particle Flow paradigm. This paper focuses on the prototype of a hadron calorimeter with analog readout, consisting of thirty-eight scintillator layers alternating with steel absorber planes. The scintillator plates are finely segmented into tiles individually read out via Silicon Photomultipliers. The presented results are based on data collected with pion beams in the energy range from 8GeV to 100GeV. The fine segmentation of the sensitive layers and the high sampling frequency allow for an excellent reconstruction of the spatial development of hadronic showers. A comparison between data and Monte Carlo simulations is presented, concerning both the longitudinal and lateral development of hadronic showers and the global response of the calorimeter. The performance of several GEANT4 physics lists with respect to these observables is evaluated.
• ### Precise measurement of the CP violation parameter sin2phi_1 in B0-->(c\bar c)K0 decays(1201.4643)

Dec. 20, 2012 hep-ex
We present a precise measurement of the CP violation parameter sin2phi_1 and the direct CP violation parameter A_f using the final data sample of 772x10^6 B\bar B pairs collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e+e- collider. One neutral B meson is reconstructed in a J/psi K0S, psi(2S) K0S, chi_c1 K0S or J/psi K0L CP-eigenstate and its flavor is identified from the decay products of the accompanying B meson. From the distribution of proper time intervals between the two B decays, we obtain the following CP violation parameters: sin2phi_1=0.667+-0.023(stat)+-0.012(syst) and A_f=0.006+-0.016(stat)+-0.012(syst).
• ### First Measurement of Inclusive B -> X_s eta Decays(0910.4751)

Aug. 20, 2010 hep-ex
We report a first measurement of inclusive B -> X_s eta decays, where X_s is a charmless state with unit strangeness. The measurement is based on a pseudo-inclusive reconstruction technique and uses a sample of 657 x 10^6 BB-bar pairs accumulated with the Belle detector at the KEKB e^+e^- collider. For M_{X_s} < 2.6 GeV/c^2, we measure a branching fraction of (26.1 +/- 3.0 (stat) +1.9 -2.1 (syst) +4.0 -7.1 (model)) x 10^-5 and a direct CP asymmetry of A_{CP} = -0.13 +/- 0.04 +0.02 -0.03. Over half of the signal occurs in the range M_{X_s} > 1.8 GeV/c^2.
• ### An Experimental Exploration of the QCD Phase Diagram: The Search for the Critical Point and the Onset of De-confinement(1007.2613)

July 15, 2010 nucl-ex
The QCD phase diagram lies at the heart of what the RHIC Physics Program is all about. While RHIC has been operating very successfully at or close to its maximum energy for almost a decade, it has become clear that this collider can also be operated at lower energies down to 5 GeV without extensive upgrades. An exploration of the full region of beam energies available at the RHIC facility is imperative. The STAR detector, due to its large uniform acceptance and excellent particle identification capabilities, is uniquely positioned to carry out this program in depth and detail. The first exploratory beam energy scan (BES) run at RHIC took place in 2010 (Run 10), since several STAR upgrades, most importantly a full barrel Time of Flight detector, are now completed which add new capabilities important for the interesting physics at BES energies. In this document we discuss current proposed measurements, with estimations of the accuracy of the measurements given an assumed event count at each beam energy.
• ### Study of the interactions of pions in the CALICE silicon-tungsten calorimeter prototype(1004.4996)

April 28, 2010 hep-ex, physics.ins-det
A prototype silicon-tungsten electromagnetic calorimeter for an ILC detector was tested in 2007 at the CERN SPS test beam. Data were collected with electron and hadron beams in the energy range 8 to 80 GeV. The analysis described here focuses on the interactions of pions in the calorimeter. One of the main objectives of the CALICE program is to validate the Monte Carlo tools available for the design of a full-sized detector. The interactions of pions in the Si-W calorimeter are therefore confronted with the predictions of various physical models implemented in the GEANT4 simulation framework.