-
Growth monitoring during the early stages of film formation is of prime
importance to understand the growth process, the microstructure and thus the
overall layer properties. In this work, we demonstrate that phonons can be used
as sensitive probes to monitor real time evolution of film microstructure
during growth, from incipient clustering to continuous film formation. For that
purpose, a silicon nitride membrane-based sensor has been fabricated to measure
in-plane thermal conductivity of thin film samples. Operating with the
3{\omega}-V\"olklein method at low frequencies, the sensor shows an exceptional
resolution down to {\Delta}({\kappa}*t)=0.065 nm*W/(m*K), enabling accurate
measurements. Validation of the sensor performance is done with organic and
metallic thin films. In both cases, at early stages of growth, we observe an
initial reduction of the effective thermal conductance of the supporting
amorphous membrane, K, related with the surface phonon scattering enhanced by
the incipient nanoclusters formation. As clusters develop, K reaches a minimum
at the percolation threshold. Subsequent island percolation produces a sharp
increase of the conductance and once the surface coverage is completed K
increases linearly with thickness The thermal conductivity of the deposited
films is obtained from the variation of K with thickness.
-
This paper presents experimental data and analysis of the structural damage
caused by swift-heavy ion irradiation of single-crystal diamond. The patterned
buried structural damage is shown to generate, via swelling, a mirror-pattern
on the sample surface, which remains largely damage-free. While extensive
results are available for light ion implantations, this effect is reported here
for the first time in the heavy ion regime, where a completely different range
of input parameters (in terms of ion species, energy, stopping power, etc.) is
available for customized irradiation. The chosen ion species are Au and Br, in
the energy range 10-40 MeV. The observed patterns, as characterized by
profilometry and atomic force microscopy, are reported in a series of model
experiments, which show swelling patterns ranging from a few nm to above 200
nm. Moreover, a systematic phenomenological modelling is presented, in which
surface swelling measurements are correlated to buried crystal damage. A
comparison is made with data for light ion implantations, showing good
compatibility with the proposed models. The modelling presented in this work
can be useful for the design and realization of micropatterned surfaces in
single crystal diamond, allowing to generate highly customized structures by
combining appropriately chosen irradiation parameters and masks.
-
A joint measurement is presented of the branching fractions
$B^0_s\to\mu^+\mu^-$ and $B^0\to\mu^+\mu^-$ in proton-proton collisions at the
LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at
a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis
produces the first observation of the $B^0_s\to\mu^+\mu^-$ decay, with a
statistical significance exceeding six standard deviations, and the best
measurement of its branching fraction so far. Furthermore, evidence for the
$B^0\to\mu^+\mu^-$ decay is obtained with a statistical significance of three
standard deviations. The branching fraction measurements are statistically
compatible with SM predictions and impose stringent constraints on several
theories beyond the SM.
-
Elliptical galaxies are systems where dark matter is usually less necessary
to explain observed dynamics than in the case of spiral galaxies, however there
are some instances where Newtonian gravity and the observable mass are
insufficient to explain their observed structure and kinematics. Such is the
case of NGC 4649, a massive elliptical galaxy in the Virgo cluster for which
recent studies report a high fraction of dark matter, 0.78 at $4R_e$. However
this galaxy has been studied within the MOND hypothesis, where a good agreement
with the observed values of velocity dispersion is found. Using a MONDian
gravity force law, here we model this galaxy as a self-consistent gravitational
equilibrium dynamical system. This force law reproduces the MOND phenomenology
in the $a<a_{0}$ regime, and reduces to the Newtonian case when $a>a_{0}$.
Within the MONDian $a<a_{0}$ scales, centrifugal equilibrium or dispersion
velocities become independent of radius, and show a direct proportionality to
the fourth root of the total baryonic mass, $V^{4}\propto(M G a_{0})$. We find
that the recent detailed observations of the surface brightness profile and the
velocity dispersion profile for this galaxy are consistent with the
phenomenology expected in MONDian theories of modified gravity, without the
need of invoking the presence of any hypothetical dark matter.
-
The Resistive Plate Chamber (RPC) muon subsystem contributes significantly to
the formation of the trigger decision and reconstruction of the muon trajectory
parameters. Simulation of the RPC response is a crucial part of the entire CMS
Monte Carlo software and directly influences the final physical results. An
algorithm based on the parametrization of RPC efficiency, noise, cluster size
and timing for every strip has been developed. Experimental data obtained from
cosmic and proton-proton collisions at $\sqrt{s}=7$ TeV have been used for
determination of the parameters. A dedicated validation procedure has been
developed. A good agreement between the simulated and experimental data has
been achieved.
-
The Resistive Plate Chambers (RPCs) are employed in the CMS experiment at the
LHC as dedicated trigger system both in the barrel and in the endcap. This note
presents results of the RPC detector uniformity and stability during the 2011
data taking period, and preliminary results obtained with 2012 data. The
detector uniformity has been ensured with a dedicated High Voltage scan with
LHC collisions, in order to determine the optimal operating working voltage of
each individual RPC chamber installed in CMS. Emphasis is given on the
procedures and results of the High Voltage calibration. Moreover, an increased
detector stability has been obtained by automatically taking into account
temperature and atmospheric pressure variations in the CMS cavern.
-
The SPaCIFY project, which aims at bringing advances in MDE to the satellite
flight software industry, advocates a top-down approach built on a
domain-specific modeling language named Synoptic. In line with previous
approaches to real-time modeling such as Statecharts and Simulink, Synoptic
features hierarchical decomposition of application and control modules in
synchronous block diagrams and state machines. Its semantics is described in
the polychronous model of computation, which is that of the synchronous
language Signal.
-
A full azimuthal phi-wedge of the ATLAS liquid argon end-cap calorimeter has
been exposed to beams of electrons, muons and pions in the energy range 6 GeV
<= E <= 200 GeV at the CERN SPS. The angular region studied corresponds to the
ATLAS impact position around the pseudorapidity interval 1.6 < |eta| < 1.8. The
beam test set-up is described. A detailed study of the performance is given as
well as the related intercalibration constants obtained. Following the ATLAS
hadronic calibration proposal, a first study of the hadron calibration using a
weighting ansatz is presented. The results are compared to predictions from
Monte Carlo simulations, based on GEANT 3 and GEANT 4 models.
-
uvby(--$\beta$) photometry has been obtained for an additional 411 very
metal-poor stars selected from the HK survey, and used to derive basic
parameters such as interstellar reddenings, metallicities, photometric
classifications, distances, and relative ages... These very metal-poor stars
are compared to M92 in the c_0,(b-y)_0 diagram, and evidence is seen for field
stars 1-3 Gyrs younger than this globular cluster. The significance of these
younger very metal-poor stars is discussed in the context of Galactic
evolution, mentioning such possibilities as hierarchical
star-formation/mass-infall of very metal-poor material and/or accretion events
whereby this material has been acquired from other (dwarf) galaxies with
different formation and chemical-enrichment histories
-
A Forward Plug Calorimeter (FPC) for the ZEUS detector at HERA has been built
as a shashlik lead-scintillator calorimeter with wave length shifter fiber
readout. Before installation it was tested and calibrated using the X5 test
beam facility of the SPS accelerator at CERN. Electron, muon and pion beams in
the momentum range of 10 to 100 GeV/c were used. Results of these measurements
are presented as well as a calibration monitoring system based on a $^{60}$Co
source.