-
Silicon drift detectors (SDDs) revolutionized spectroscopy in fields as
diverse as geology and dentistry. For a subset of experiments at ultra-fast,
x-ray free-electron lasers (FELs), SDDs can make substantial contributions.
Often the unknown spectrum is interesting, carrying science data, or the
background measurement is useful to identify unexpected signals. Many
measurements involve only several discrete photon energies known a priori,
allowing single event decomposition of pile-up and spectroscopic photon
counting. We designed a pulse function and demonstrated that the signal
amplitude and rise time are obtained for each pulse by fitting, thus removing
the need for pulse shaping. By avoiding pulse shaping, rise times of tens of
nanoseconds resulted in reduced pulse pile-up and allowed decomposition of
remaining pulse pile-up at photon separation times down to hundreds of
nanoseconds while yielding time-of-arrival information with precision of 10
nanoseconds. Waveform fitting yields simultaneously high energy resolution and
high counting rates (2 orders of magnitude higher than current digital pulse
processors). We showed that pile-up spectrum fitting is relatively simple and
preferable to pile-up spectrum deconvolution. We developed a photon pile-up
statistical model for constant intensity sources, extended it to variable
intensity sources (typical for FELs) and used it to fit a complex pile-up
spectrum. We subsequently developed a Bayesian pile-up decomposition method
that allows decomposing pile-up of single events with up to 6 photons from 6
monochromatic lines with 99% accuracy. The usefulness of SDDs will continue
into the x-ray FEL era of science. Their successors, the ePixS hybrid pixel
detectors, already offer hundreds of pixels, each with similar performance to
an SDD, in a compact, robust and affordable package
-
Radiation detection in applications ranging from high energy physics to
medical imaging rely on solid state detectors, often hybrid pixel detectors
with (1) reverse biased p-n junction pixel sensors and (2) readout ASICs,
attached by flip-chip-bonding. Transient signals characteristics are important
in, e.g., matching ASIC and sensor design, modeling and optimizing detector
parameters and describing timing and charge sharing properties. Currently
analytical forms of transient signals are available for only a few limited
cases (e.g., drift or diffusion) or for the steady state (which is not relevant
for high energy radiation detection). Tools are available for (relatively slow)
numerical evaluation of the transient charge transport. We present here the
first analytical solutions of partial differential equations describing
drift-diffusion-recombination charge transport in planar p-n junction sensors
in a variety of conditions: (1) undepleted, (2) fully depleted, (3) taking into
account the gradual velocity saturation, and (4) overdepleted. We deduce the
Green's functions which can be applied to any detection problem through simple
convolution with the initial conditions. We compare the analytical solutions
with Monte Carlo simulations and industry standard simulations (Synopsys
Sentaurus), demonstrating good agreement. Using the analytical equations
enables fast modeling of the influence of various detector parameters on
tracking, imaging and timing performance, describing performance and enabling
optimizations for different applications. Finally, we illustrate this model
with applications in 3D+T (x,y,z,time) photon tracking and 4D+T
(x,y,theta,phi,time) relativistic charged particle tracking.
-
Free-electron lasers (FELs) opened a new window on imaging the motion of
atoms and molecules. At SLAC, FEL experiments are performed at LCLS using 120
Hz pulses with 10^12 to 10^13 photons in 10 fs (billions of times brighter than
at the most powerful synchrotrons). Concurrently, users and staff operate under
high pressure due to flexible and often rapidly changing setups and low
tolerance for system malfunction. This extreme detection environment raises
unique challenges, from obvious to surprising, and leads to treating detectors
as consumables. We discuss in detail the detector damage mechanisms observed in
7 years of operation at LCLS, together with the corresponding damage mitigation
strategies and their effectiveness. Main types of damage mechanisms already
identified include: (1) x-ray radiation damage (from "catastrophic" to
"classical"), (2) direct and indirect damage caused by optical lasers, (3)
sample induced damage, (4) vacuum related damage, (5) high-pressure
environment. In total, 19 damage mechanisms have been identified. We also
present general strategies for reducing damage risk or minimizing the impact of
detector damage on the science program. These include availability of
replacement parts and skilled operators and also careful planning, incident
investigation resulting in updated designs, procedures and operator training.
-
This work is on the Physics of the B Factories. Part A of this book contains
a brief description of the SLAC and KEK B Factories as well as their detectors,
BaBar and Belle, and data taking related issues. Part B discusses tools and
methods used by the experiments in order to obtain results. The results
themselves can be found in Part C.
Please note that version 3 on the archive is the auxiliary version of the
Physics of the B Factories book. This uses the notation alpha, beta, gamma for
the angles of the Unitarity Triangle. The nominal version uses the notation
phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.
-
Recent developments in dynamical systems theory have revealed long-lived and
coherent Lagrangian (i.e., material) eddies in incompressible,
satellite-derived surface ocean velocity fields. Paradoxically, observed
drifting buoys and floating matter tend to create dissipative-looking patterns
near oceanic eddies, which appear to be inconsistent with the conservative
fluid particle patterns created by coherent Lagrangian eddies. Here we show
that inclusion of inertial effects (i.e., those produced by the buoyancy and
size finiteness of an object) in a rotating two-dimensional incompressible flow
context resolves this paradox. Specifically, we obtain that anticyclonic
coherent Lagrangian eddies attract (repel) negatively (positively) buoyant
finite-size particles, while cyclonic coherent Lagrangian eddies attract
(repel) positively (negatively) buoyant finite-size particles. We show how
these results explain dissipative-looking satellite-tracked surface drifter and
subsurface float trajectories, as well as satellite-derived \emph{Sargassum}
distributions.
-
Two special calorimeters are foreseen for the instrumentation of the very
forward region of an ILC or CLIC detector; a luminometer (LumiCal) designed to
measure the rate of low angle Bhabha scattering events with a precision better
than 10$^{-3}$ at the ILC and 10$^{-2}$ at CLIC, and a low polar-angle
calorimeter (BeamCal). The latter will be hit by a large amount of
beamstrahlung remnants. The intensity and the spatial shape of these
depositions will provide a fast luminosity estimate, as well as determination
of beam parameters. The sensors of this calorimeter must be radiation-hard.
Both devices will improve the e.m. hermeticity of the detector in the search
for new particles. Finely segmented and very compact electromagnetic
calorimeters will match these requirements. Due to the high occupancy, fast
front-end electronics will be needed. Monte Carlo studies were performed to
investigate the impact of beam-beam interactions and physics background
processes on the luminosity measurement, and of beamstrahlung on the
performance of BeamCal, as well as to optimise the design of both calorimeters.
Dedicated sensors, front-end and ADC ASICs have been designed for the ILC and
prototypes are available. Prototypes of sensor planes fully assembled with
readout electronics have been studied in electron beams.
-
In Haller and Beron-Vera (2013) we developed a variational principle for the
detection of coherent Lagrangian vortex boundaries. The solutions of this
variational principle turn out to be closed null-geodesics of the Lorentzian
metric associated with a generalized Green-Lagrange strain tensor family. This
metric interpretation implies a mathematical analogy between coherent
Lagrangian vortex boundaries and photon spheres in general relativity. Here we
give an improved discussion on this analogy.
-
These reports present the results of the 2013 Community Summer Study of the
APS Division of Particles and Fields ("Snowmass 2013") on the future program of
particle physics in the U.S. Chapter 8, on the Instrumentation Frontier,
discusses the instrumentation needs of future experiments in the Energy,
Intensity, and Cosmic Frontiers, promising new technologies for particle
physics research, and issues of gathering resources for long-term research in
this area.
-
We introduce a simple variational principle for coherent material vortices in
two-dimensional turbulence. Vortex boundaries are sought as closed stationary
curves of the averaged Lagrangian strain. Solutions to this problem turn out to
be mathematically equivalent to photon spheres around black holes in cosmology.
The fluidic photon spheres satisfy explicit differential equations whose
outermost limit cycles are optimal Lagrangian vortex boundaries. As an
application, we uncover super-coherent material eddies in the South Atlantic,
which yield specific Lagrangian transport estimates for Agulhas rings.
-
We report on the results of an extensive R&D program aimed at the evaluation
of Thick-Gas Electron Multipliers (THGEM) as potential active elements for
Digital Hadron Calorimetry (DHCAL). Results are presented on efficiency, pad
multiplicity and discharge probability of a 10x10 cm2 prototype detector with 1
cm2 readout pads. The detector is comprised of single- or double-THGEM
multipliers coupled to the pad electrode either directly or via a resistive
anode. Investigations employing standard discrete electronics and the KPiX
readout system have been carried out both under laboratory conditions and with
muons and pions at the CERN RD51 test beam. For detectors having a
charge-induction gap, it has been shown that even a ~6 mm thick single-THGEM
detector reached detection efficiencies above 95%, with pad-hit multiplicity of
1.1-1.2 per event; discharge probabilities were of the order of 1e-6 - 1e-5
sparks/trigger, depending on the detector structure and gain. Preliminary beam
tests with a WELL hole-structure, closed by a resistive anode, yielded
discharge probabilities of <2e-6 for an efficiency of ~95%. Methods are
presented to reduce charge-spread and pad multiplicity with resistive anodes.
The new method showed good prospects for further evaluation of very thin
THGEM-based detectors as potential active elements for DHCAL, with competitive
performances, simplicity and robustness. Further developments are in course.
-
We report the observation of two-neutrino double-beta decay in Xe-136 with
T_1/2 = 2.11 +- 0.04 (stat.) +- 0.21 (sys.) x 10^21 yr. This second order
process, predicted by the Standard Model, has been observed for several nuclei
but not for Xe-136. The observed decay rate provides new input to matrix
element calculations and to the search for the more interesting neutrino-less
double-beta decay, the most sensitive probe for the existence of Majorana
particles and the measurement of the neutrino mass scale.
-
The SiD collaboration is developing a Si-W sampling electromagnetic
calorimeter, with anticipated application for the International Linear
Collider. Assembling the modules for such a detector will involve special
bonding technologies for the interconnections, especially for attaching a
silicon detector wafer to a flex cable readout bus. We review the interconnect
technologies involved, including oxidation removal processes, pad surface
preparation, solder ball selection and placement, and bond quality assurance.
Our results show that solder ball bonding is a promising technique for the Si-W
ECAL, and unresolved issues are being addressed.
-
We summarize recent R&D progress for a silicon-tungsten electromagnetic
calorimeter (ECal) with integrated electronics, designed to meet the ILC
physics requirements.
-
The mixing of an impurity into a flowing fluid is an important process in
many areas of science, including geophysical processes, chemical reactors, and
microfluidic devices. In some cases, for example periodic flows, the concepts
of nonlinear dynamics provide a deep theoretical basis for understanding
mixing. Unfortunately, the building blocks of this theory, i.e. the fixed
points and invariant manifolds of the associated Poincare map, have remained
inaccessible to direct experimental study, thus limiting the insight that could
be obtained. Using precision measurements of tracer particle trajectories in a
two-dimensional fluid flow producing chaotic mixing, we directly measure the
time-dependent stretching and compression fields. These quantities, previously
available only numerically, attain local maxima along lines coinciding with the
stable and unstable manifolds, thus revealing the dynamical structures that
control mixing. Contours or level sets of a passive impurity field are found to
be aligned parallel to the lines of large compression (unstable manifolds) at
each instant. This connection appears to persist as the onset of turbulence is
approached.