-
The Tokai-to-Kamioka (T2K) experiment studies neutrino oscillations using an
off-axis muon neutrino beam with a peak energy of about 0.6 GeV that originates
at the J-PARC accelerator facility. Interactions of the neutrinos are observed
at near detectors placed at 280 m from the production target and at the far
detector -- Super-Kamiokande (SK) -- located 295 km away. The flux prediction
is an essential part of the successful prediction of neutrino interaction rates
at the T2K detectors and is an important input to T2K neutrino oscillation and
cross section measurements. A FLUKA and GEANT3 based simulation models the
physical processes involved in the neutrino production, from the interaction of
primary beam protons in the T2K target, to the decay of hadrons and muons that
produce neutrinos. The simulation uses proton beam monitor measurements as
inputs. The modeling of hadronic interactions is re-weighted using thin target
hadron production data, including recent charged pion and kaon measurements
from the NA61/SHINE experiment. For the first T2K analyses the uncertainties on
the flux prediction are evaluated to be below 15% near the flux peak. The
uncertainty on the ratio of the flux predictions at the far and near detectors
is less than 2% near the flux peak.
-
We present the first operation of the Avalanche Photodiode (APD) from
Hamamatsu to xenon scintillation light and to direct X-rays of 22.1 keV and 5.9
keV. A large non-linear response was observed for the direct X-ray detection.
At 415 V APD bias voltage it was of about 30 % for 22.1 keV and about 45 % for
5.9 keV. The quantum efficiency for 172 nm photons has been measured to be 69
+/- 15 %.
-
Precise measurement of neutrino beam direction and intensity was achieved
based on a new concept with modularized neutrino detectors. INGRID (Interactive
Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino
oscillation experiment. INGRID consists of 16 identical modules arranged in
horizontal and vertical arrays around the beam center. The module has a
sandwich structure of iron target plates and scintillator trackers. INGRID
directly monitors the muon neutrino beam profile center and intensity using the
number of observed neutrino events in each module. The neutrino beam direction
is measured with accuracy better than 0.4 mrad from the measured profile
center. The normalized event rate is measured with 4% precision.
The Tokai-to-Kamioka (T2K) experiment studies neutrino oscillations using an off-axis muon neutrino beam with a peak energy of about 0.6 GeV that originates at the J-PARC accelerator facility. Interactions of the neutrinos are observed at near detectors placed at 280 m from the production target and at the far detector -- Super-Kamiokande (SK) -- located 295 km away. The flux prediction is an essential part of the successful prediction of neutrino interaction rates at the T2K detectors and is an important input to T2K neutrino oscillation and cross section measurements. A FLUKA and GEANT3 based simulation models the physical processes involved in the neutrino production, from the interaction of primary beam protons in the T2K target, to the decay of hadrons and muons that produce neutrinos. The simulation uses proton beam monitor measurements as inputs. The modeling of hadronic interactions is re-weighted using thin target hadron production data, including recent charged pion and kaon measurements from the NA61/SHINE experiment. For the first T2K analyses the uncertainties on the flux prediction are evaluated to be below 15% near the flux peak. The uncertainty on the ratio of the flux predictions at the far and near detectors is less than 2% near the flux peak.
We present the first operation of the Avalanche Photodiode (APD) from Hamamatsu to xenon scintillation light and to direct X-rays of 22.1 keV and 5.9 keV. A large non-linear response was observed for the direct X-ray detection. At 415 V APD bias voltage it was of about 30 % for 22.1 keV and about 45 % for 5.9 keV. The quantum efficiency for 172 nm photons has been measured to be 69 +/- 15 %.
Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure of iron target plates and scintillator trackers. INGRID directly monitors the muon neutrino beam profile center and intensity using the number of observed neutrino events in each module. The neutrino beam direction is measured with accuracy better than 0.4 mrad from the measured profile center. The normalized event rate is measured with 4% precision.