• One of the most successful paradigms of many-body physics is the concept of quasiparticles: excitations in strongly interacting matter behaving like weakly interacting particles in free space. Quasiparticles in metals are very robust objects. Yet, when a system's ground state undergoes a qualitative change at a quantum critical point (QCP), the quasiparticles may disintegrate and give way to an exotic quantum-fluid state of matter. The nature of this breakdown is intensely debated, because the emergent quantum fluid dominates the material properties up to high temperature and might even be related to the occurence of superconductivity in some compounds. Here we trace the dynamics of heavy-fermion quasiparticles in CeCu$_{6-x}$Au$_{x}$ and monitor their evolution towards the QCP in time-resolved experiments, supported by many-body calculations. A terahertz pulse disrupts the many-body heavy-fermion state. Under emission of a delayed, phase-coherent terahertz reflex the heavy-fermion state recovers, with a coherence time 100 times longer than typically associated with correlated metals. The quasiparticle weight collapses towards the QCP, yet its formation temperature remains constant -- phenomena believed to be mutually exclusive. Coexistence in the same experiment calls for revisions in our view on quantum criticality.
  • The determination of the longitudinal spin Seebeck effect (LSSE) coefficient is currently plagued by a large uncertainty due to the poor reproducibility of the experimental conditions used in its measurement. In this work we present a detailed analysis of two different methods used for the determination of the LSSE coefficient. We have performed LSSE experiments in different laboratories, by using different setups and employing both the temperature difference method and the heat flux method. We found that the lack of reproducibility can be mainly attributed to the thermal contact resistance between the sample and the thermal baths which generate the temperature gradient. Due to the variation of the thermal resistance, we found that the scaling of the LSSE voltage to the heat flux through the sample rather than to the temperature difference across the sample greatly reduces the uncertainty. The characteristics of a single YIG/Pt LSSE device obtained with two different setups was $(1.143\pm0.007)\cdot 10^{-7}$ Vm/W and $(1.101\pm0.015)\cdot 10^{-7}$ Vm/W with the heat flux method and $(2.313\pm0.017)\cdot 10^{-7}$ V/K and $(4.956\pm0.005)\cdot 10^{-7}$ V/K with the temperature difference method. This shows that systematic errors can be considerably reduced with the heat flux method.
  • We improve the density-matrix renormalization group (DMRG) evaluation of the Kubo formula for the zero-temperature linear conductance of one-dimensional correlated systems.The dynamical DMRG is used to compute the linear response of a finite system to an applied AC source-drain voltage, then the low-frequency finite-system response is extrapolated to the thermodynamic limit to obtain the DC conductance of an infinite system. The method is demonstrated on the one-dimensional spinless fermion model at half filling. Our method is able to replicate several predictions of the Luttinger liquid theory such as the renormalization of the conductance in an homogeneous conductor, the universal effects of a single barrier, and the resonant tunneling through a double barrier.
  • We present high resolution (0.2", 1000 AU) 1.3 mm ALMA observations of massive infrared dark cloud clump, G028.37+00.07-C1, thought to harbor the early stages of massive star formation. Using $\rm N_2D^+$(3-2) we resolve the previously identified C1-S core, separating the bulk of its emission from two nearby protostellar sources. C1-S is thus identified as a massive ($\sim50\:M_\odot$), compact ($\sim0.1\:$pc diameter) starless core, e.g., with no signs of outflow activity. Being highly deuterated, this is a promising candidate for a pre-stellar core on the verge of collapse. An analysis of its dynamical state indicates a sub-virial velocity dispersion compared to a trans-Alfv\'enic turbulent core model. However, virial equilibrium could be achieved with sub-Alfv\'enic conditions involving $\sim2\:$mG magnetic field strengths.
  • The $\Theta_{eff}/\Theta_{rig}$ parameter of the spin distribution of the level density was determined for 61 nuclei covering the mass range of 44 to 200. The experimental isomeric cross-section ratios for 25 isomeric pairs were compared with the model calculation to find the best fit to the experimental data. The model calculations were carried out with the TALYS code using the BSFG model for the level density. The reduced $\chi ^2$ values were calculated to describe the deviation of the experimental data from the model calculation. An $\eta_d $ was introduced calculating the $\Theta_{eff}/\Theta_{rig}$ value from the low energy discrete levels of the nucleus. The $\eta /\eta_d $ values seem to be independent of the mass number, their average value near to one. The $\eta /\eta_d $ values also seem to be independent of the average excitation energy in the continuum, indicating that $\eta $ is independent of the excitation energy. The mass number and (N-Z) dependence of the $\eta $ values were studied. The $\eta $ values for the nuclei with odd mass number show an exponential decrease as a function of A or (N-Z). The $\eta $ values for the odd-odd type of nuclei appear to be constant, near one, up to the mass number 110 or (N-Z) of 13. Above these values, the $\eta $ values show exponential decrease. The $\eta $ values for even-even type nuclei decrease exponentially up to A equal to 142 or (N-Z) equal to 20. The values are lower than those for the nearby odd-odd type nuclei. The $\eta $ values increase for nuclei with A between 142 and 156 and (N-Z) between 20 and 28, and they finally reach the value of odd-odd type systematics.
  • We analyse observations of the X9.3 solar flare (SOL2017-09-06T11:53) observed by SDO/HMI and Hinode/SOT. Our aim is to learn about the nature of the HMI pseudocontinuum Ic used as a proxy for the white-light continuum. From model atmospheres retrieved by an inversion code applied to the Stokes profiles observed by the Hinode satellite we synthesise profiles of the FeI 617.3 nm line and compare them to HMI observations. Based on a pixel-by-pixel comparison we show that the value of Ic represents the continuum level well in quiet-Sun regions only. In magnetised regions it suffers from a simplistic algorithm that is applied to a complex line shape. During this flare both instruments also registered emission profiles in the flare ribbons. Such emission profiles are poorly represented by the six spectral points of HMI, the used algorithm does not account for emission profiles in general, and thus the derived pseudocontinuum intensity does not approximate the continuum value properly.
  • Porous nanosponges, percolated with a three-dimensional network of 10-nm sized ligaments, recently emerged as promising substrates for plasmon-enhanced spectroscopy and (photo-)catalysis. Experimental and theoretical work suggests surface plasmon localization in some hot-spot modes as the physical origin of their unusual optical properties, but so far the existence of such hot-spots has not been proven. Here we use scattering-type scanning near-field nano-spectroscopy on individual gold nanosponges to reveal spatially and spectrally confined modes with 10 nanometer localization lengths by mapping the local optical density of states. High quality factors of individual hot-spots of more than 40 are demonstrated. A statistical analysis of near-field intensity fluctuations unveils plasmonics in the strong localization regime. The observed field localization and enhancement make such nanosponges an appealing platform for a variety of applications ranging from nonlinear optics to strong-coupling physics.
  • Non-relativistic shocks accelerate ions to highly relativistic energies provided that the orientation of the magnetic field is closely aligned with the shock normal (quasi-parallel shock configuration). In contrast, quasi-perpendicular shocks do not efficiently accelerate ions. We model this obliquity-dependent acceleration process in a spherically expanding blast wave setup with the moving-mesh code {\sc arepo} for different magnetic field morphologies, ranging from homogeneous to turbulent configurations. A Sedov-Taylor explosion in a homogeneous magnetic field generates an oblate ellipsoidal shock surface due to the slower propagating blast wave in the direction of the magnetic field. This is because of the efficient cosmic ray (CR) production in the quasi-parallel polar cap regions, which softens the equation of state and increases the compressibility of the post-shock gas. We find that the solution remains self-similar because the ellipticity of the propagating blast wave stays constant in time. This enables us to derive an effective ratio of specific heats for a composite of thermal gas and CRs as a function of the maximum acceleration efficiency. We finally discuss the behavior of supernova remnants expanding into a turbulent magnetic field with varying coherence lengths. For a maximum CR acceleration efficiency of about 15 per cent at quasi-parallel shocks (as suggested by kinetic plasma simulations), we find an average efficiency of about 5 per cent, independent of the assumed magnetic coherence length.
  • We study correlation functions of spatially separated static quark-antiquark pairs in 2+1 flavor QCD in order to investigate onset and nature of color screening at high temperatures. We perform lattice calculations in a wide temperature range, $140\,{\rm MeV}\le T \le 5814\,{\rm MeV}$, using the highly improved staggered quark (HISQ) action and several lattice spacings to control discretization effects. By comparing at high temperatures our lattice results to weak-coupling calculations as well as to the zero temperature result for the energy of a static quark-antiquark pair, we observe that color screening sets in at $rT \approx 0.3$. Furthermore, we also observe that in the range $0.3 \lesssim r T \lesssim 0.6$ weak-coupling calculations in the framework of suitable effective field theories provide an adequate picture of color screening.
  • Monolayers of transition metal dichalcogenides (TMDCs) exhibit an exceptionally strong Coulomb interaction between charge carriers due to the two-dimensional carrier confinement in connection with weak dielectric screening. High densities of excited charge carriers in the various band-structure valleys cause strong many-body renormalizations that influence both the electronic properties and the optical response of the material. We investigate electronic and optical properties of the typical monolayer TMDCs MoS$_2$, MoSe$_2$, WS$_2$ and WSe$_2$ in the presence of excited carriers by solving semiconductor Bloch equations on the full Brillouin zone. With increasing carrier density, we systematically find a reduction of the exciton binding energies due to Coulomb screening and Pauli blocking. Together with excitation-induced band-gap shrinkage this leads to redshifts of excitonic resonances up to the dissociation of excitons. As a central result, we predict for all investigated monolayer TMDCs that the $\Sigma$-valley shifts stronger than the K-valley. Two of the materials undergo a transition from direct to indirect band gaps under carrier excitation similar to well-known strain-induced effects. Our findings have strong implications for the filling of conduction-band valleys with excited carriers and are relevant to transport and optical applications as well as the emergence of phonon-driven superconductivity.
  • With the continued evolution of modern radiation therapy towards high precision delivery of high therapeutic doses to the tumour while optimally sparing surrounding healthy tissue, imaging becomes a crucial component to identify the intended target, properly position it at the treatment site and, in more advanced research applications, visualize the treatment delivery. This contribution reviews the main role of imaging in modern external beam radiation therapy, with special emphasis on emerging ion beam therapy techniques, which aim at exploiting the favourable properties of ion interaction in matter for unprecedented ballistic accuracy in dose delivery
  • A spin-fermion model that captures the charge-transfer properties of Cu-based high critical temperature superconductors is introduced and studied via Monte Carlo simulations. The strong Coulomb repulsion among $d$-electrons in the Cu orbitals is phenomenologically replaced by an exchange coupling between the spins of the itinerant electrons and localized spins at the Cu sites, formally similar to double-exchange models for manganites. This interaction induces a charge-transfer insulator gap in the undoped case (five electrons per unit cell). Adding a small antiferromagnetic Heisenberg coupling between localized spins reinforces the global tendency towards antiferromagnetic order. To perform numerical calculations the localized spins are considered classical, as in previous related efforts. In this first study, undoped and doped $8\times 8$ clusters are analyzed in a wide range of temperatures. The numerical results reproduce experimental features in the one-particle spectral function and the density-of-states such as $(i)$ the formation of a Zhang-Rice-like band with a dispersion of order $\sim 0.5$ eV and with rotational symmetry about wavevector $(\pi/2,\pi/2)$ at the top of the band, and $(ii)$ the opening of a pseudogap at the chemical potential upon doping. We also observed incipient tendencies towards spin incommensurability. This simple model offers a formalism intermediate between standard mean-field approximations, that fail at finite temperatures in regimes with short-range order, and sophisticated many-body techniques such as Quantum Monte Carlo, that suffer sign problems.
  • In hierarchical models of galaxy formation, stellar tidal streams are expected around most, if not all, galaxies. Although these features may provide useful diagnostics of the $\Lambda$CDM model, their observational properties remain poorly constrained because they are challenging to detect and interpret and have been studied in detail for only a sparse sampling of galaxy population. More quantitative, systematic approaches are required. We advocate statistical analysis of the counts and properties of such features in archival wide-field imaging surveys for a direct comparison against results from numerical simulations. Thus, in this paper we aim to study systematically the frequency of occurrence and other observational properties of tidal features around nearby galaxies. The sample we construct will act as a foundational dataset for statistical comparison with cosmological models of galaxy formation. Our approach is based on a visual classification of diffuse features around a volume-limited sample of nearby galaxies, using a post-processing of Sloan Digital Sky Survey imaging optimized for the detection of stellar structure with low surface brightness. At a limiting surface brightness of $28\ \mathrm{mag~arcsec^{-2}}$, 14% of the galaxies in our sample exhibit evidence of diffuse features likely to have arisen from minor merging events. Our technique recovers all previously known streams in our sample and yields a number of new candidates. Consistent with previous studies, coherent arc-like features and shells are the most common type of tidal structures found in this study. We conclude that although some detections are ambiguous and could be corroborated or refuted with deeper imaging, our technique provides a reliable foundation for the statistical analysis of diffuse circumgalactic features in wide-area imaging surveys, and for the identification of targets for follow-up studies.
  • In this study, we introduce CobWeb 1.0 which is a graphical user interface tailored explicitly for accurate image segmentation and representative elementary volume analysis of digital rock images derived from high resolution tomography. The CobWeb code is a work package deployed as a series of windows executable binaries which use image processing and machine learning libraries of MATLAB. The user-friendly interface enables image segmentation and cross-validation employing K-means, Fuzzy C-means, least square support vector machine, and ensemble classification (bragging and boosting) segmentation techniques. A quick region of interest analysis including relative porosity trends, pore size distribution, and volume fraction of different phases can be performed on different geomaterials. Data can be exported to ParaView, DSI Studio (.fib), Microsoft Excel and MATLAB for further visualisation and statistical analysis. The efficiency of the new tool was verified using gas hydrate-bearing sediment samples and Berea sandstone, both from synchrotron tomography datasets, as well as Grosmont carbonate rock X-ray micro-tomographic dataset. Despite its high sub-micrometer resolution, the gas hydrate dataset was suffering from edge enhancement artefacts. These artefacts were primarily normalized by the dual filtering approach using both non-local means and anisotropic diffusion filtering. The desired automatic segmentation of the phases (brine, sand, and gas hydrate) was thus successfully achieved using the dual clustering approach.
  • By applying the Born-Huang expansion, originally developed for coupled nucleus-electron systems, to the full nucleus-electron-photon Hamiltonian of non-relativistic quantum electrodynamics (QED) in the long-wavelength approximation, we deduce an exact set of coupled equations for electrons on photonic energy surfaces and the nuclei on the resulting polaritonic energy surfaces. Since the photonic surfaces and the corresponding non-adiabatic coupling elements can be solved analytically, the resulting expansion can be brought into a compact form which allows us to analyze certain aspects of coupled nucleus-electron-photon systems in a simple and intuitive manner. Furthermore, we discuss structural differences between the exact quantum treatment and Floquet theory, that along this line existing implementations can be adjusted to incorporate QED and how standard drawbacks of Floquet theory can be overcome. We then highlight, by assuming that the relevant photonic frequencies of a prototypical cavity QED experiment are in the energy range of the electrons, how from this generalized Born-Huang expansion an adopted Born-Oppenheimer approximation for nuclei on polaritonic surfaces can be deduced. By restricting the basis set of this generalized Born-Oppenheimer approximation we span the ark from quantum chemistry to quantum optics by recovering simple models of coupled matter-photon systems employed in quantum optics and polaritonic chemistry. We finally highlight numerically that simple few level models can lead to physically wrong predictions, even in the weak coupling regime, and show how the presented derivations from first principles help to check and derive physically grounded simplified models.
  • C. -H. Yu, F. T. Avignone III, T. Bode, T. S. Caldwell (9, 11), Y. -D. Chan, C. Cuesta, H. Ejiri, M. Green, V. E. Guiseppe, E. W. Hoppe, S. I. Konovalov, R. Massarczyk, J. Myslik, D. C. Radford, N. W. Ruff, R. L. Varner, B. R. White, E. Yakushev (The Majorana Collaboration) Oak Ridge National Laboratory, Oak Ridge, TN, USA, Center for Experimental Nuclear Physics, Astrophysics, Department of Physics, University of Washington, WA, USA, Pacific Northwest National Laboratory, Richland, WA, USA, Department of Physics, Astronomy, University of South Carolina, Columbia, SC, USA, National Research Center, Kurchatov Institute, Institute for Theoretical, Experimental Physics, Moscow, Russia, Department of Physics, University of South Dakota, Vermillion, SC, USA, Max-Planc-Institute für Physik, München, Germany, Joint Institute for Nuclear Research, Dubna, Russia, Department of Physics, Duke University, Durham, NC, USA, Department of Physics, Astronomy, University of North Carolina, Chapel Hill, NC, USA, Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA, USA, South Dakota School of Mines, Technology, Rapid City, SD, USA, Department of Physics, Astronomy, University of Tennessee, Knoxville, TN, USA, Research Center for Nuclear Physics, Osaka University, Ibaraki, Osaka, Japan, Department of Physics, Princeton University, Princeton, NJ, USA, Department of Physics, North Carolina State University, Raleigh, NC, USA, Department of Physics, Massachusetts Institute of Technology, Cambridge, MA, USA, Department of Physics, Black Hills State University, Spearfish, SD, USA, Physics Department, Tennessee Tech University, Cookeville, TN, USA, Department of Physics, Engineering, Astronomy, Queen's University, Kingston, ON, Canada, Physik Department, Technische Universität, München, Germany)
    March 29, 2018 nucl-ex, physics.ins-det
    The Majorana Collaboration is using an array of high-purity Ge detectors to search for neutrinoless double-beta decay in 76Ge. Searches for neutrinoless double-beta decay are understood to be the only viable experimental method for testing the Majorana nature of the neutrino. Observation of this decay would imply violation of lepton number, that neutrinos are Majorana in nature, and provide information on the neutrino mass. The Majorana Demonstrator comprises 44.1 kg of p-type point-contact Ge detectors (29.7 kg enriched in 76Ge) surrounded by a low-background shield system. The experiment achieved a high efficiency of converting raw Ge material to detectors and an unprecedented detector energy resolution of 2.5 keV FWHM at Q$_{\beta\beta}$. The Majorana collaboration began taking physics data in 2016. This paper summarizes key construction aspects of the Demonstrator and shows preliminary results from initial data.
  • To cope with the increasing complexity of developing and maintaining modern (software) systems, multiple abstractions (models) of the same system can be established and used to allow different domain experts to collaborate and contribute their respective expertise. This divide-and-conquer, model-based approach requires, however, support for a concurrent engineering process, i.e., providing a means of checking, restoring, and ensuring the consistency of all involved and concurrently maintained models. The task of providing such support is often referred to as consistency management. Although there exist various approaches to consistency management and numerous (industrial) case studies described in the literature on bidirectional transformations (bx), there is currently no uniform description of diverse but related industrial applications of model synchronisation and other forms of consistency management. This makes it challenging to detect similarities and differences related to requirements, constraints, applied techniques and tools. It is thus difficult to compare and transfer knowledge gained from (successful) projects to other bx approaches or even other bx tools for the same general approach. In this paper, therefore, we propose a description language for envisioned scenarios in the problem domain of consistency management, as well as a complementary description language for solution strategies in terms of method fragments and method patterns in the solution domain of Model-Driven Engineering (MDE). Our work is inspired by previous research in the bx and MDE communities, and is also based on our collective experience from over ten years of investigating a series of application scenarios in the industry automation section together with Siemens AG as an industrial partner. [Abridged due to arXiv]
  • Context: Software development tools should work and behave consistently across different programming languages, so that developers do not have to familiarize themselves with new tooling for new languages. Also, being able to combine multiple programming languages in a program increases reusability, as developers do not have to recreate software frameworks and libraries in the language they develop in and can reuse existing software instead. Inquiry: However, developers often have a broad choice of tools, some of which are designed for only one specific programming language. Various Integrated Development Environments have support for multiple languages, but are usually unable to provide a consistent programming experience due to different language-specific runtime features. With regard to language integrations, common mechanisms usually use abstraction layers, such as the operating system or a network connection, which are often boundaries for tools and hence negatively affect the programming experience. Approach: In this paper, we present a novel approach for tool reuse that aims to improve the experience with regard to working with multiple high-level dynamic, object-oriented programming languages. As part of this, we build a multi-language virtual execution environment and reuse Smalltalk's live programming tools for other languages. Knowledge: An important part of our approach is to retrofit and align runtime capabilities for different languages as it is a requirement for providing consistent tools. Furthermore, it provides convenient means to reuse and even mix software libraries and frameworks written in different languages without breaking tool support. Grounding: The prototype system Squimera is an implementation of our approach and demonstrates that it is possible to reuse both development tools from a live programming system to improve the development experience as well as software artifacts from different languages to increase productivity. Importance: In the domain of polyglot programming systems, most research has focused on the integration of different languages and corresponding performance optimizations. Our work, on the other hand, focuses on tooling and the overall programming experience.
  • Context: Software development tools should work and behave consistently across different programming languages, so that developers do not have to familiarize themselves with new tooling for new languages. Also, being able to combine multiple programming languages in a program increases reusability, as developers do not have to recreate software frameworks and libraries in the language they develop in and can reuse existing software instead. Inquiry: However, developers often have a broad choice of tools, some of which are designed for only one specific programming language. Various Integrated Development Environments have support for multiple languages, but are usually unable to provide a consistent programming experience due to different language-specific runtime features. With regard to language integrations, common mechanisms usually use abstraction layers, such as the operating system or a network connection, which are often boundaries for tools and hence negatively affect the programming experience. Approach: In this paper, we present a novel approach for tool reuse that aims to improve the experience with regard to working with multiple high-level dynamic, object-oriented programming languages. As part of this, we build a multi-language virtual execution environment and reuse Smalltalk's live programming tools for other languages. Knowledge: An important part of our approach is to retrofit and align runtime capabilities for different languages as it is a requirement for providing consistent tools. Furthermore, it provides convenient means to reuse and even mix software libraries and frameworks written in different languages without breaking tool support. Grounding: The prototype system Squimera is an implementation of our approach and demonstrates that it is possible to reuse both development tools from a live programming system to improve the development experience as well as software artifacts from different languages to increase productivity. Importance: In the domain of polyglot programming systems, most research has focused on the integration of different languages and corresponding performance optimizations. Our work, on the other hand, focuses on tooling and the overall programming experience.
  • Context: Software development tools should work and behave consistently across different programming languages, so that developers do not have to familiarize themselves with new tooling for new languages. Also, being able to combine multiple programming languages in a program increases reusability, as developers do not have to recreate software frameworks and libraries in the language they develop in and can reuse existing software instead. Inquiry: However, developers often have a broad choice of tools, some of which are designed for only one specific programming language. Various Integrated Development Environments have support for multiple languages, but are usually unable to provide a consistent programming experience due to different language-specific runtime features. With regard to language integrations, common mechanisms usually use abstraction layers, such as the operating system or a network connection, which are often boundaries for tools and hence negatively affect the programming experience. Approach: In this paper, we present a novel approach for tool reuse that aims to improve the experience with regard to working with multiple high-level dynamic, object-oriented programming languages. As part of this, we build a multi-language virtual execution environment and reuse Smalltalk's live programming tools for other languages. Knowledge: An important part of our approach is to retrofit and align runtime capabilities for different languages as it is a requirement for providing consistent tools. Furthermore, it provides convenient means to reuse and even mix software libraries and frameworks written in different languages without breaking tool support. Grounding: The prototype system Squimera is an implementation of our approach and demonstrates that it is possible to reuse both development tools from a live programming system to improve the development experience as well as software artifacts from different languages to increase productivity. Importance: In the domain of polyglot programming systems, most research has focused on the integration of different languages and corresponding performance optimizations. Our work, on the other hand, focuses on tooling and the overall programming experience.
  • Context: Software development tools should work and behave consistently across different programming languages, so that developers do not have to familiarize themselves with new tooling for new languages. Also, being able to combine multiple programming languages in a program increases reusability, as developers do not have to recreate software frameworks and libraries in the language they develop in and can reuse existing software instead. Inquiry: However, developers often have a broad choice of tools, some of which are designed for only one specific programming language. Various Integrated Development Environments have support for multiple languages, but are usually unable to provide a consistent programming experience due to different language-specific runtime features. With regard to language integrations, common mechanisms usually use abstraction layers, such as the operating system or a network connection, which are often boundaries for tools and hence negatively affect the programming experience. Approach: In this paper, we present a novel approach for tool reuse that aims to improve the experience with regard to working with multiple high-level dynamic, object-oriented programming languages. As part of this, we build a multi-language virtual execution environment and reuse Smalltalk's live programming tools for other languages. Knowledge: An important part of our approach is to retrofit and align runtime capabilities for different languages as it is a requirement for providing consistent tools. Furthermore, it provides convenient means to reuse and even mix software libraries and frameworks written in different languages without breaking tool support. Grounding: The prototype system Squimera is an implementation of our approach and demonstrates that it is possible to reuse both development tools from a live programming system to improve the development experience as well as software artifacts from different languages to increase productivity. Importance: In the domain of polyglot programming systems, most research has focused on the integration of different languages and corresponding performance optimizations. Our work, on the other hand, focuses on tooling and the overall programming experience.
  • Context: Software development tools should work and behave consistently across different programming languages, so that developers do not have to familiarize themselves with new tooling for new languages. Also, being able to combine multiple programming languages in a program increases reusability, as developers do not have to recreate software frameworks and libraries in the language they develop in and can reuse existing software instead. Inquiry: However, developers often have a broad choice of tools, some of which are designed for only one specific programming language. Various Integrated Development Environments have support for multiple languages, but are usually unable to provide a consistent programming experience due to different language-specific runtime features. With regard to language integrations, common mechanisms usually use abstraction layers, such as the operating system or a network connection, which are often boundaries for tools and hence negatively affect the programming experience. Approach: In this paper, we present a novel approach for tool reuse that aims to improve the experience with regard to working with multiple high-level dynamic, object-oriented programming languages. As part of this, we build a multi-language virtual execution environment and reuse Smalltalk's live programming tools for other languages. Knowledge: An important part of our approach is to retrofit and align runtime capabilities for different languages as it is a requirement for providing consistent tools. Furthermore, it provides convenient means to reuse and even mix software libraries and frameworks written in different languages without breaking tool support. Grounding: The prototype system Squimera is an implementation of our approach and demonstrates that it is possible to reuse both development tools from a live programming system to improve the development experience as well as software artifacts from different languages to increase productivity. Importance: In the domain of polyglot programming systems, most research has focused on the integration of different languages and corresponding performance optimizations. Our work, on the other hand, focuses on tooling and the overall programming experience.
  • Efficient fiber-based long-distance quantum communication via quantum repeaters relies on deterministic single-photon sources at telecom wavelengths, with the potential to exploit the existing world-wide infrastructures. For upscaling the experimental complexity in quantum networking, two-photon interference (TPI) of remote non-classical emitters in the low-loss telecom bands is of utmost importance. With respect to TPI of distinct emitters, several experiments have been conducted, e.g., using trapped atoms [Beugnon2006], ions [Maunz2007], NV-centers [Bernien2012, Sipahigil2012], SiV-centers [Sipahigil2014], organic molecules [Lettow2010] and semiconductor quantum dots (QDs) [Patel2010, Flagg2010, He2013b, Gold2014, Giesz2015, Thoma2017, Reindl2017, Zopf2017]; however, the spectral range was far from the highly desirable telecom C-band. Here, we report on TPI at 1550 nm between down-converted single photons from remote QDs [Michler2017Book], demonstrating quantum frequency conversion [Zaske2012, Ates2012, Kambs2016] as precise and stable mechanism to erase the frequency difference between independent emitters. On resonance, a TPI-visibility of (29+-3)% has been observed, being only limited by spectral diffusion processes of the individual QDs [Robinson2000, Kuhlmann2015]. Up to 2-km of additional fiber channel has been introduced in both or individual signal paths with no influence on TPI-visibility, proving negligible photon wave-packet distortion. The present experiment is conducted within a local fiber network covering several rooms between two floors of the building. Our studies pave the way to establish long-distance entanglement distribution between remote solid-state emitters including interfaces with various quantum hybrid systems [DeGreve2012,Maring2017,Bock2017,Maring2018].
  • There is mounting evidence for the coevolution of galaxies and their embedded massive black holes (MBHs) in a hierarchical structure formation paradigm. To tackle the nonlinear processes of galaxy-MBH interaction, we describe a self-consistent numerical framework which incorporates both galaxies and MBHs. The high-resolution adaptive mesh refinement (AMR) code Enzo is modified to model the formation and feedback of molecular clouds at their characteristic scale of 15.2 pc and the accretion of gas onto a MBH. Two major channels of MBH feedback, radiative feedback (X-ray photons followed through full 3D adaptive ray tracing) and mechanical feedback (bipolar jets resolved in high-resolution AMR), are employed. We investigate the coevolution of a 9.2e11 Msun galactic halo and its 1e5 Msun embedded MBH at redshift 3 in a cosmological LCDM simulation. The MBH feedback heats the surrounding ISM up to 1e6 K through photoionization and Compton heating and locally suppresses star formation in the galactic inner core. The feedback considerably changes the stellar distribution there. This new channel of feedback from a slowly growing MBH is particularly interesting because it is only locally dominant, and does not require the heating of gas globally on the disk. The MBH also self-regulates its growth by keeping the surrounding ISM hot for an extended period of time.
  • We are developing imaging and photon counting UV-MCP detectors, which are sensitive in the wavelength range from far ultraviolet to near ultraviolet. A good quantum efficiency, solar blindness and high spatial resolution is the aim of our development. The sealed detector has a Cs-activated photoactive layer of GaN (or similarly advanced photocathode), which is operated in semitransparent mode on (001)-MgF 2 . The detector comprises a stack of two long-life MCPs and a coplanar cross strip anode with advanced readout electronics. The main challenge is the flawless growth of the GaN photocathode layer as well as the requirements for the sealing of the detector, to prevent a degradation of the photocathode. We present here the detector concept and the experimental setup, examine in detail the status in the production and describe the current status of the readout electronics development.