• Conventional magnonic devices use three classes of magnetostatic waves that require detailed manipulation of magnetization structure that makes the design and the device/circuitry scalability difficult tasks. Here, we demonstrate that devices based on topological exchange spin waves do not suffer from the problem with additional nice features of nano-scale wavelength and high frequency. Two results are reported. 1) A perpendicular ferromagnet on a honeycomb lattice is generically a topological magnetic material in the sense that topologically protected chiral edge spin waves exist in the band gap as long as spin-orbit induced nearest-neighbor pseudodipolar interaction (and/or next-nearest neighbor Dzyaloshinskii-Moriya interaction) is present. 2) As a proof of concept, spin wave beamsplitters and spin wave interferometers are designed by using domain walls to manipulate the propagation of topologically protected chiral spin waves. Since magnetic domain walls can be controlled by magnetic fields or electric current/fields, one can essentially draw, erase and redraw different spin wave devices and circuitry on the same magnetic plate so that the proposed devices are reconfigurable and tunable. Devices made from magnetic topological materials are robust against both internal and external perturbations such as the spin wave frequency variation and device geometry as well as defects.
  • Spin information carried by magnons is attractive for computing technology and the development of magnon-based computing circuits is of great interest. However, magnon transport in insulators has been challenging, different from the clear physical picture for spin transport in conductors. Here we investigate the lateral transport properties of thermally excited magnons in yttrium iron garnet (YIG), a model magnetic insulator. Polarity reversals of detected spins in non-local geometry devices have been experimentally observed and are strongly dependent on temperature, YIG film thickness, and injector-detector separation distance. A competing two-channel transport model for thermally excited magnons is proposed, which is qualitatively consistent with the spin signal behavior. In addition to the fundamental significance for thermal magnon transport, our work furthers the development of magnonics by creating an easily accessible magnon source with controllable transport
  • For the first time, we present an extensive study of stars with individual non-local thermodynamic equilibrium (NLTE) abundances for 17 chemical elements from Li to Eu in a sample of stars uniformly distributed over the $-2.62 \le$ [Fe/H] $\le +0.24$ metallicity range that is suitable for the Galactic chemical evolution research. The star sample has been kinematically selected to trace the Galactic thin and thick disks and halo. We find new and improve earlier results as follows. (i) The element-to-iron ratios for Mg, Si, Ca, and Ti form a MP plateau at a similar height of 0.3~dex, and the knee occurs at common [Fe/H] $\simeq -0.8$. The knee at the same metallicity is observed for [O/Fe], and the MP plateau is formed at [O/Fe] = 0.61. (ii) The upward trend of [C/O] with decreasing metallicity exists at [Fe/H] $< -1.2$, supporting the earlier finding of Akerman et al. (iii) An underabundance of Na relative to Mg in the [Fe/H] $< -1$ stars is nearly constant, with the mean [Na/Mg] $\simeq -0.5$. (iv) The K/Sc, Ca/Sc, and Ti/Sc ratios form well-defined trends, suggesting a common site of the K-Ti production. (v) Sr follows the Fe abundance down to [Fe/H] $\simeq -2.5$, while Zr is enhanced in MP stars. (vi) The comparisons of our results with some widely used Galactic evolution models are given. The use of the NLTE element abundances raises credit to the interpretation of the data in the context of the chemical evolution of the Galaxy.
  • The all-d-metal Mn2-based Heusler ferromagnetic shape memory alloys Mn50Ni40-xCoxTi10 (x = 8 and 9.5) are realized. With a generic comparison between d-metal Ti and main-group elements in lowering the transformation temperature, the magnetostructural martensitic transformations are established by further introducing Co to produce local ferromagnetic Mn-Co-Mn configurations. A 5-fold modulation and (3, -2) stacking of [00 10] of martensite are determined by XRD and HRTEM analysis. Based on the transformation, a large magneto-strain of 6900 ppm and a large volume change of -2.54% are observed in polycrystalline samples, which makes the all-d-metal magnetic martensitic alloys of interest for magnetic/pressure multi-field driven applications.
  • The dynamic magnetic susceptibility of magnetic materials near ferromagnetic resonance (FMR) is very important in interpreting dc-voltage in electrical detection of FMR. Based on the causality principle and the assumption that the usual microwave absorption lineshape around FMR is Lorentzian, general forms of dynamic susceptibility of an arbitrary sample and the corresponding dc-voltage lineshape are obtained. Our main findings are: 1) The dynamic susceptibility is not a Polder tensor for material with arbitrary anisotropy. Two off-diagonal elements are not in general opposite to each other. However, the linear response coefficient of magnetization to total rf field is a Polder tensor. This may explain why two off-diagonal elements are always assumed to be opposite to each other in analyses. 2) The frequency dependence of dynamic susceptibility near FMR is fully characterized by six numbers while its field dependence is fully characterized by seven numbers. 3) A recipe of how to determine these numbers by standard microwave absorption measurements for an arbitrary sample is proposed. Our results allow one to unambiguously separate the contribution of the anisotropic magnetoresistance to dc-voltage from that of the anomalous Hall effect. With these results, one can reliably extract the information of spin pumping and the inverse spin Hall effect, and determine the spin-Hall angle. 4) The field-dependence of susceptibility matrix at a fixed frequency may have several peaks when the effective field is not monotonic of the applied field. In contrast, the frequency-dependence of susceptibility matrix at a fixed field has only one peak. Furthermore, in the case that resonance frequency is not sensitive to the applied field, the field dependence of susceptibility matrix, as well as dc-voltage, may have another non-resonance broad peak. Thus, one should be careful in interpreting observed peaks.
  • Within the linear response of polycrystalline magnetic films to electric currents, a general analysis predicts three new galvanomagnetic effects originated from the two-dimensional nature of the films. These new galvanomagnetic effects, which differ from the conventional extraordinary Hall effect and anisotropic magnetoresistance, are follows. 1) The longitudinal resistivity depends linearly on the magnetization component perpendicular to a film. 2) A current parallel to the magnetization can generate an electric field in the vertical direction of a film. 3) A current perpendicular to a film can generate an electric field along the magnetization direction.
  • Heusler ferromagnetic shape-memory alloys (FSMAs) normally consist of transition-group d-metals and main-group p-elements. Here, we report the realization of FSMAs in Heusler phases that completely consist of d metals. By introducing the d-metal Ti into NiMn alloys, cubic B2-type Heusler phase is obtained and the martensitic transformation temperature is decreased efficiently. Strong ferromagnetism is established by further doping Co atoms into the B2-type antiferromagnetic Ni-Mn-Ti austenite. Based on the magnetic-field-induced martensitic transformations, collective multifunctional properties are observed in Ni(Co)-Mn-Ti alloys. The d metals not only facilitate the formation of B2-type Heusler phases, but also establish strong ferromagnetic coupling and offer the possibility to tune the martensitic transformation.
  • A.-L. Luo, Y.-H. Zhao, G. Zhao, L.-C. Deng, X.-W. Liu, Y.-P. Jing, G. Wang, H.-T Zhang, J.-R. Shi, X.-Q. Cui, Y.-Q. Chu, G.-P. Li, Z.-R. Bai, Y. Cai, S.-Y. Cao, Z.-H Cao, J. L. Carlin, H. Y. Chen, J.-J. Chen, K.-X. Chen, L. Chen, X.-L. Chen, X.-Y. Chen, Y. Chen, N. Christlieb, J.-R. Chu, C.-Z. Cui, Y.-Q. Dong, B. Du, D.-W. Fan, L. Feng, J.-N Fu, P. Gao, X.-F. Gong, B.-Z. Gu, Y.-X. Guo, Z.-W. Han, B.-L. He, J.-L. Hou, Y.-H. Hou, W. Hou, H.-Z. Hu, N.-S. Hu, Z.-W. Hu, Z.-Y. Huo, L. Jia, F.-H. Jiang, X. Jiang, Z.-B. Jiang, G. Jin, X. Kong, X. Kong, Y.-J. Lei, A.-H. Li, C.-H. Li, G.-W. Li, H.-N. Li, J. Li, Q. Li, S. Li, S.-S. Li, X.-N. Li, Y. Li, Y.-B. Li, Y.-P. Li, Y. Liang, C.-C. Lin, C. Liu, G.-R. Liu, G.-Q. Liu, Z.-G. Liu, W.-Z. Lu, Y. Luo, Y.-D. Mao, H. Newberg, J.-J. Ni, Z.-X. Qi, Y.-J. Qi, S.-Y. Shen, H.-M. Shi, J. Song, Y.-H. Song, D.-Q. Su, H.-J. Su, Z.-H. Tang, Q.-S. Tao, Y. Tian, D. Wang, D.-Q. Wang, F.-F. Wang, G.-M. Wang, H. Wang, H.-C. Wang, J. Wang, J.-N. Wang, J.-L. Wang, J.-P. Wang, J.-X. Wang, L. Wang, M.-X. Wang, S.-G. Wang, S.-Q. Wang, X. Wang, Y.-N. Wang, Y. Wang, Y.-F. Wang, Y.-F. Wang, P. Wei, M.-Z. Wei, H. Wu, K.-F. Wu, X.-B. Wu, Y. Wu, Y. Z. Wu, X.-Z. Xing, L.-Z. Xu, X.-Q. Xu, Y. Xu, T.-S. Yan, D.-H. Yang, H.-F. Yang, H.-Q. Yang, M. Yang, Z.-Q. Yao, Y. Yu, H. Yuan, H.-B. Yuan, H.-L. Yuan, W.-M. Yuan, C. Zhai, E.-P. Zhang, H. W. Zhang, J.-N. Zhang, L.-P. Zhang, W. Zhang, Y. Zhang, Y.-X. Zhang, Z.-C. Zhang, M. Zhao, F. Zhou, X. Zhou, J. Zhu, Y.-T. Zhu, S.-C. Zou, F. Zuo
    May 7, 2015 astro-ph.GA, astro-ph.IM
    The Large sky Area Multi-Object Spectroscopic Telescope (LAMOST) General Survey is a spectroscopic survey that will eventually cover approximately half of the celestial sphere and collect 10 million spectra of stars, galaxies and QSOs. Objects both in the pilot survey and the first year general survey are included in the LAMOST First Data Release (DR1). The pilot survey started in October 2011 and ended in June 2012, and the data have been released to the public as the LAMOST Pilot Data Release in August 2012. The general survey started in September 2012, and completed its first year of operation in June 2013. The LAMOST DR1 includes a total of 1202 plates containing 2,955,336 spectra, of which 1,790,879 spectra have observed signal-to-noise S/N >10. All data with S/N>2 are formally released as LAMOST DR1 under the LAMOST data policy. This data release contains a total of 2,204,696 spectra, of which 1,944,329 are stellar spectra, 12,082 are galaxy spectra and 5,017 are quasars. The DR1 includes not only spectra, but also three stellar catalogues with measured parameters: AFGK-type stars with high quality spectra (1,061,918 entries), A-type stars (100,073 entries), and M stars (121,522 entries). This paper introduces the survey design, the observational and instrumental limitations, data reduction and analysis, and some caveats. Description of the FITS structure of spectral files and parameter catalogues is also provided.
  • In this work, IrMn$_{3}$/insulating-Y$_{3}$Fe$_{5}$O$_{12}$ exchange-biased bilayers are studied. The behavior of the net magnetic moment $\Delta m_{AFM}$ in the antiferromagnet is directly probed by anomalous and planar Hall effects, and anisotropic magnetoresistance. The $\Delta m_{AFM}$ is proved to come from the interfacial uncompensated magnetic moment. We demonstrate that the exchange bias and rotational hysteresis are induced by the irreversible switching of the $\Delta m_{AFM}$. In the training effect, the $\Delta m_{AFM}$ changes continuously. This work highlights the fundamental role of the $\Delta m_{AFM}$ in the exchange bias and facilitates the manipulation of antiferromagnetic spintronic devices.
  • A coupling of the first-order paramagnetic-to-induced-ferromagnetic martensitic and the second-order antiferromagnetic-to-ferromagnetic metamagnetic transitions was found in MnNi0.8Fe0.2Ge alloy. Based on the coupling, a magneto-volume effect driven by the martensitic transition and a table-like magnetocaloric effect generated by the successive magnetic phase transitions arise collectively. By using the magneto-volume effect, the internal pressure stress in the volume-expansion martensitic transition was determined at 350 MPa. The magnetocaloric effect, with a wide working temperature range of 26 K around room temperature, shows a small hysteresis loss (5 J/kg) and a large net refrigerant capacity (157 J/kg).
  • An effective scheme of isostructural alloying was applied to establish a Curie-temperature window in isostructural MnNiGe-CoNiGe system. With the simultaneous accomplishment of decreasing structural-transition temperature and converting antiferromagnetic martensite to ferromagnetic state, a 200 K Curie-temperature window was established between Curie temperatures of austenite and martensite phases. In the window, a first-order magnetostructural transition between paramagnetic austenite and ferromagnetic martensite occurs with a sharp jump in magnetization, showing a magnetic entropy change as large as -40 J kg-1 K-1 in a 50 kOe field change. This giant magnetocaloric effect enables Mn1-xCoxNiGe to become a potential magnetic refrigerant.
  • A new disordered atom configuration in Fe2CrGa alloy has been created by ball-milling method. This leads to a significant enhancement of the magnetic moment up to 3.2~3.9 {\mu}B and an increase of Curie temperature by about 200 K, compared with the arc-melt samples. Combination of first-principles calculations and experimental results reveals that Fe2CrGa alloy should crystallize in Hg2CuTi based structure with different atomic disorders for the samples prepared by different methods. It is addressed that magnetic interactions play a crucial role for the system to adopt such an atomic configuration which disobeys the empirical rule.
  • Abundant phenomena in CoCr2-xMnxO4 (x = 0 ~ 2) samples such as magnetic compensation, magnetostriction and exchange bias effect have been observed and investigated in this work. A structure transition from cubic to tetragonal symmetry has been found in the samples with x around 1.4. It has shown that the doped Mn3+ ions initially occupy the A (Co) sites when x < 0.2, and then mainly take the B1 (Cr) sites. This behavior results in a role conversion of magnetic contributors, and thus a magnetic compensation between two competitively magnetic sublattices at the composition near x = 0.5. Furthermore, temperature compensation has also been found in the samples with x = 0.5 and 0.6, with the compensation temperature in the range of 45 ~ 75 K. The Mn-doping also changes the frustration degree and modulates the exchange interaction in this system, and thus prevents the formation of long range conical order of spins. Therefore, the magnetoelectric transition temperature at 23 K in CoCr2O4 is shifted to lower temperature with increased dopants. The magnetostriction effect in this Cobalt spinel system has been considered for the first time. The strain has a maximum value of about 240 ppm at x = 0.2 and shows the similar tendency as the compensation behaviors. Additionally, the exchange bias effect observed in the samples with x < 0.5 shows a negative value under low cooling field for x = 0.5.
  • We have investigated the impact of covalent hybridization on martensitic structure and magnetic properties of Ni50Mn5+xGa35-xCu10 shape memory alloys. We found that the lattice distortion ((c-a)/a) of L10 martensite monotonously changes with the substitution of Mn for Ga atoms and shows a kink behavior at Ga(at.%)= 25 due to the weakened covalent effect between main-group and transition-metal atoms. Moreover, owing to the competition between covalence hybridization and magnetic ordering of introduced Mn atoms, the molecular magnetic moment and Curie temperature coincidently show maximums at Ga(at.%)=25 as well. These behaviors are closely associated with corresponding changes of the strength of covalent hybridization. The results therefore suggest that careful control of the concentration of main-group atoms in Heusler alloys can serve as an additional general tuning parameter for searching new multifunctional materials.
  • The crystal structure and magnetoresponsive properties of Fe-doped MnCoGe alloys have been investigated using x-ray diffraction (XRD) and magnetic measurements. By alloying the Fe-containing isostructure compounds into MnCoGe, a magnetostructural transition from paramagnetic austenite to ferromagnetic martensite with large magnetization difference can be realized in a temperature window between the Curie temperatures of the austenite and martensite, resulting in magnetic-field-induced martensitic transformations and large magnetic-entropy changes. A structural and magnetic phase diagram of Fe-doped MnCoGe alloys has been proposed.
  • The structure, magnetism, magnetic compensation behavior, exchange interaction and electronic structures of Co50-xMn25Ga25+x and Co50-xMn25+xGa25 (x=0-25) alloys have been systematically investigated by both experiments and first-principles calculations. We found that all the samples exhibited body centered cubic structures with a high degree of atomic ordering. With increasing Ga content, the composition dependence of lattice parameters shows a kink point at the middle composition in Co50-xMn25Ga25+x alloys, which can be attributed to the enhanced covalent effect between the Ga and the transition metals. Furthermore, a complicated magnetic competition has been revealed in Co50-xMn25Ga25+x alloys, which causes the Curie temperature dramatically decrease and results in a magnetic moment compensation behavior. In Co50-xMn25+xGa25 alloys, however, with increasing Mn content, an additional ferrimagnetic configuration was established in the native ferromagnetic matrix, which causes the molecular moment monotonously decreases and the exchange interaction enhances gradually. The electronic structure calculations indicate that the Co50-xMn25+xGa25 alloys are likely to be in a coexistence state of the itinerant and localized magnetism. Our study will be helpful to understand the nature of magnetic ordering as well as to tune magnetic compensation and electronic properties of Heusler alloys.
  • Magnetic reversal processes of a FePt/{\alpha}-Fe/FePt trilayer system with in-plane easy axes have been investigated within a micromagnetic approach. It is found that the magnetic reversal process consists of three steps: nucleation of a prototype of domain wall in the soft phase, the evolution as well as the motion of the domain wall from the soft to the hard phase and finally, the magnetic reversal of the hard phase. For small soft layer thickness Ls, the three steps are reduced to one single step, where the magnetizations in the two phases reverse simultaneously and the hysteresis loops are square with nucleation as the coercivity mechanism. As Ls increases, both nucleation and pinning fields decrease. In the meantime, the single-step reversal expands to a standard three-step one and the coercivity mechanism changes from nucleation to pinning. The critical thickness where the coercivity mechanism alters, could be derived analytically, which is found to be inversely proportional to the square root of the crystalline anisotropy of the hard phase. Further increase of Ls leads to the change of the coercivity mechanism from pinning to nucleation.
  • Magnetic refrigeration based on the magnetocaloric effect (MCE) of materials is a potential technique that has prominet advantages over the currently used gas compression-expansion technique in the sense of its high efficiency and environment friendship. In this article, our recent progress in explorating effective MCE materials is reviewed with the emphasis on the MCE in the LaFe13-xSix-based alloys with a first order magnetic transition discovered by us. These alloys show large entropy changes in a wide temperature range near room temperature. Effects of magnetic rare-earth doping, interstitial atom, and high pressure on the MCE have been systematically studied. Special issues such as appropriate approaches to determining the MCE associated with the first-order magnetic transition, the depression of magnetic and thermal hystereses, and the key factors determining the magnetic exchange in alloys of this kind are discussed. The applicability of the giant MCE materials to the magnetic refrigeration near ambient temperature is evaluated. A brief review of other materials with significant MCE is also presented in the article.