• Transient beam loading effect is one of the key issues in any superconducting accelerators, which needs to be carefully investigated. The core problem in the analysis is to obtain the time evolution of cavity voltage under the transient beam loading. To simplify the problem, the second order ordinary differential equation describing the behavior of the cavity voltage is intuitively simplified to a first order one, with the aid of the two critical approximations lacking the proof for their validity. In this paper, the validity is examined mathematically in some specific cases, resulting in a criterion for the simplification. It's popular to solve the approximated equation for the cavity voltage numerically, while this paper shows that it can also be solved analytically under the step function approximation for the driven term. With the analytical solution to the cavity voltage, the transient reflected power from the cavity and the energy gain of the central particle in the bunch can also be calculated analytically. The validity of the step function approximation for the driven term is examined by direct evaluations. After that, the analytical results are compared with the numerical ones.
  • In this paper, we present direct mass measurements of neutron-rich $^{86}$Kr projectile fragments conducted at the HIRFL-CSR facility in Lanzhou by employing the Isochronous Mass Spectrometry (IMS) method. The new mass excesses of $^{52-54}$Sc nuclides are determined to be -40492(82), -38928(114), -34654(540) keV, which show a significant increase of binding energy compared to the reported ones in the Atomic Mass Evaluation 2012 (AME12). In particular, $^{53}$Sc and $^{54}$Sc are more bound by 0.8 MeV and 1.0 MeV, respectively. The behavior of the two neutron separation energy with neutron numbers indicates a strong sub-shell closure at neutron number $N$ = 32 in Sc isotopes.
  • A superconducting half-wave resonator has been designed with the frequency of 325 MHz and beta of 0.51. Different geometry parameters and shapes of inner conductors (racetrack, ring-shape and elliptical-shape) were optimized to decrease the peak electromagnetic fields to obtain higher accelerating gradients and minimize the dissipated power on the cavity walls. To suppress the operation frequency shift caused by the helium pressure fluctuations and maximize the tuning ranges, the frequency shifts and mechanical properties were studied on the electric and magnetic areas separately. At the end, the helium vessel was also designed to keep the mechanical structure as robust as possible. The fabrication and test of the prototype will be completed in the beginning of 2016.
  • For selecting the properly magnetic alloy (MA) material to load the RF compression cavity, the measurement of the MA cores which is produced by Liyuan Company has been carried out at IMP. We measured 4 kinds of MA core materials, type V1, V2, A1 and A2. And we mainly focus on the permeability, quality factor (Q value) and shunt impedance of the MA core. The MA cores which have higher permeability, lower Q value and higher shunt impedance will be selected to load RF compression cavity. According to the results of measurement, the type V1, V2 and A2 material will be chosen as candidate to load RF cavity.