A prototype of a luminometer, designed for a future e+e- collider detector,
and consisting at present of a four-plane module, was tested in the CERN PS
accelerator T9 beam. The objective of this beam test was to demonstrate a
multi-plane tungsten/silicon operation, to study the development of the
electromagnetic shower and to compare it with MC simulations. The Moli\`ere
radius has been determined to be 24.0 +/- 0.6 (stat.) +/- 1.5 (syst.) mm using
a parametrization of the shower shape. Very good agreement was found between
data and a detailed Geant4 simulation.
Detector-plane prototypes of the very forward calorimetry of a future
detector at an e+e- collider have been built and their performance was measured
in an electron beam. The detector plane comprises silicon or GaAs pad sensors,
dedicated front-end and ADC ASICs, and an FPGA for data concentration.
Measurements of the signal-to-noise ratio and the response as a function of the
position of the sensor are presented. A deconvolution method is successfully
applied, and a comparison of the measured shower shape as a function of the
absorber depth with a Monte-Carlo simulation is given.
The ALICE Collaboration has measured inclusive J/psi production in pp
collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results
presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and
have been obtained by measuring the electron and muon pair decay channels,
respectively. The integrated luminosities for the two channels are L^e_int=1.1
nb^-1 and L^mu_int=19.9 nb^-1, and the corresponding signal statistics are
N_J/psi^e+e-=59 +/- 14 and N_J/psi^mu+mu-=1364 +/- 53. We present
dsigma_J/psi/dy for the two rapidity regions under study and, for the forward-y
range, d^2sigma_J/psi/dydp_t in the transverse momentum domain 0<p_t<8 GeV/c.
The results are compared with previously published results at sqrt(s)=7 TeV and
with theoretical calculations.