
In this letter, we study a new technique for energy beamforming (EB) in
multiuser networks, which combines large antenna retrodirectivity at the
transmitter side with signal backscattering at the energy receivers. The
proposed technique has low complexity and achieves EB without any active
operation at the receivers or complicated signal processing techniques at the
transmitter. Since the average harvested energy depends on the backscattering
coefficients, we investigate different reflection policies for various design
objectives. The proposed policies are analyzed from a system level standpoint
by taking into account spatial randomness.

We derive closedform expressions for the achievable rates of a bufferaided
fullduplex (FD) multipleinput multipleoutput (MIMO) Gaussian relay channel.
The FD relay still suffers from residual selfinterference (RSI) after the
application of selfinterference mitigation techniques. We investigate both
cases of a slowRSI channel where the RSI is fixed over the entire codeword,
and a fastRSI channel where the RSI changes from one symbol duration to
another within the codeword. We show that the RSI can be completely eliminated
in the slowRSI case when the FD relay is equipped with a buffer while the fast
RSI cannot be eliminated. For the fixedrate data transmission scenario, we
derive the optimal transmission strategy that should be adopted by the source
node and relay node to maximize the system throughput. We verify our analytical
findings through simulations.

Wireless powered backscatter communications is an attractive technology for
nextgeneration lowpowered sensor networks such as the Internet of Things.
However, backscattering suffers from collisions due to multiple simultaneous
transmissions and a dyadic backscatter channel, which greatly attenuate the
received signal at the reader. This letter deals with backscatter
communications in sensor networks from a largescale pointofview and
considers various collision resolution techniques: directional antennas,
ultranarrow band transmissions and successive interference cancellation. We
derive analytical expressions for the decoding probability and our results show
the significant gains, which can be achieved from the aforementioned
techniques.

In this report, the fundamental limits of simultaneous information and energy
transmission in the twouser Gaussian multiple access channel (GMAC) with and
without feedback are fully characterized. More specifically, all the achievable
information and energy transmission rates (in bits per channel use and
energyunits per channel use, respectively) are identified. Furthermore, the
fundamental limits on the individual and sum rates given a minimum energy rate
ensured at an energy harvester are also characterized. In the case without
feedback, an achievability scheme based on powersplitting and successive
interference cancellation is shown to be optimal. Alternatively, in the case
with feedback (GMACF), a simple yet optimal achievability scheme based on
powersplitting and Ozarow's capacity achieving scheme is presented. Finally,
the energy transmission enhancement induced by the use of feedback is
quantified. Feedback can at most double the energy transmission rate at high
SNRs when the information transmission sumrate is kept fixed at the
sumcapacity of the GMAC, but it has no effect at very low SNRs.

In this paper, we consider two fundamental fullduplex (FD) architectures,
twonode and threenode, in the context of cellular networks where the
terminals employ directional antennas. The simultaneous transmission and
reception of data in nonorthogonal channels makes FD radio a potential
solution for the currently limited spectrum. However, its implementation
generates high levels of interference either in the form of loopback
interference (LI) from the output to the input antenna of a transceiver or in
the form of cochannel interference in largescale multicell networks due to
the large number of active links. Using a stochastic geometry model, we
investigate how directional antennas can control and mitigate the cochannel
interference. Furthermore, we provide a model which characterizes the way
directional antennas manage the LI in order to passively suppress it. Our
results show that both architectures can benefit significantly by the
employment of directional antennas. Finally, we consider the case where both
architectures are employed in the network and derive the optimal values for the
density fraction of each architecture which maximize the success probability
and the network throughput.

In this work, we address the relay selection problem for the wireless powered
communication networks, where the relays harvest energy from the source radio
frequency signals. A single sourcedestination pair is considered without a
direct link. The connecting relay nodes are equipped with storage batteries of
infinite size. We assume that the channel state information (CSI) on the
sourcerelay link is available at the relay nodes. Depending on the
availability of the CSI on the relaydestination link at the relay node, we
propose different relay selection schemes and evaluate the outage probability.
The availability of the CSI at the relay node on the relaydestination link
considerably improves the performance due to additional flexibility in the
relay selection mechanism. We numerically quantify the performance for the
proposed schemes and compare the outage probability for fixed and equal number
of wireless powered forwarding relays.

Successive interference cancellation (SIC) is based on the idea that some
interfering signals may be strong enough to decode in order to be removed from
the aggregate received signal and thus boost performance. In this letter, we
study the SIC technique from a simultaneous wireless information and power
transfer (SWIPT) standpoint. We consider a bipolar ad hoc network and evaluate
the impact of SIC on the SWIPT performance for the power splitting technique.
Theoretical and numerical results show that our proposed approach can achieve
significant energy gains and under certain scenarios the average harvested
energy converges to its upper bound.

In this letter, we study the simultaneous wireless information and power
transfer (SWIPT) concept in 3D bipolar ad hoc networks with spatial
randomness. Due to three spatial dimensions of the network, we introduce a 3D
antenna sectorization that exploits the horizontal and the vertical spatial
separation. The impact of 3D antenna sectorization on SWIPT performance is
evaluated for the powersplitting technique by using stochastic geometry tools.
Theoretical and numerical results show that 3D sectorization achieves a more
accurate beam steering in the 3D space, which can be beneficial for both the
information and the power transfer.

We consider a fullduplex (FD) decodeandforward system in which the
timeswitching protocol is employed by the multiantenna relay to receive
energy from the source and transmit information to the destination. The
instantaneous throughput is maximized by optimizing receive and transmit
beamformers at the relay and the timesplit parameter. We study both optimum
and suboptimum schemes. The reformulated problem in the optimum scheme achieves
closedform solutions in terms of transmit beamformer for some scenarios. In
other scenarios, the optimization problem is formulated as a semidefinite
relaxation problem and a rankone optimum solution is always guaranteed. In the
suboptimum schemes, the beamformers are obtained using maximum ratio combining,
zeroforcing, and maximum ratio transmission. When beamformers have closedform
solutions, the achievable instantaneous and delayconstrained throughput are
analytically characterized. Our results reveal that, beamforming increases both
the energy harvesting and loop interference suppression capabilities at the FD
relay. Moreover, simulation results demonstrate that the choice of the linear
processing scheme as well as the timesplit plays a critical role in
determining the FD gains.

A fullduplex (FD) multiple antenna access point (AP) communicating with
single antenna halfduplex (HD) spatially random users to support simultaneous
uplink (UL)/downlink (DL) transmissions is investigated. Since FD nodes are
inherently constrained by the loopback interference (LI), we study precoding
schemes for the AP based on maximum ratio combining (MRC)/maximal ratio
transmission (MRT), zeroforcing and the optimal scheme for UL and DL sum rate
maximization using tools from stochastic geometry. In order to shed insights
into the system's performance, simple expressions for single antenna/perfect LI
cancellation/negligible internode interference cases are also presented. We
show that FD precoding at AP improves the UL/DL sum rate and hence a doubling
of the performance of the HD mode is achievable. In particular, our results
show that these impressive performance gains remain substantially intact even
if the LI cancellation is imperfect. Furthermore, relative performance gap
between FD and HD modes increases as the number of transmit/receive antennas
becomes large, while with the MRC/MRT scheme, increasing the receive antenna
number at FD AP, is more beneficial in terms of sum rate than increasing the
transmit antenna number.

This paper deals with the problem of relay selection in wireless powered
cooperative networks, where spatially random relays are equipped with energy
storage devices e.g., batteries. In contrast to conventional techniques and in
order to reduce complexity, the relay nodes can either harvest energy from the
source signal (in case of uncharged battery) or attempt to decode and forward
it (in case of charged battery). Several relay selection schemes that
correspond to different state information requirements and implementation
complexities are proposed. The charging/discharging behavior of the battery is
modeled as a twostate Markov chain and analytical expressions for the
steadystate distribution and the outage probability performance are derived
for each relay selection scheme. We prove that energy storage significantly
affects the performance of the system and results in a zeroth diversity gain at
high signaltonoise ratios; the convergence floors depend on the steadystate
distribution of the battery and are derived in closedform by using appropriate
approximations. The proposed relay selection schemes are generalized to a
largescale network with multiple access points (APs), where relays assist the
closest AP and suffer from multiuser interference.

This letter deals with the opportunistic beamforming (OBF) scheme for
multiantenna downlink with spatial randomness. In contrast to conventional
OBF, the terminals return only 1bit feedback, which is powered by wireless
power transfer through a rectenna array. We study two fundamental topologies
for the combination of the rectenna elements; the directcurrent combiner and
the radiofrequency combiner. The beam outage probability is derived in closed
form for both combination schemes, by using high order statistics and
stochastic geometry.

Loop interference (LI) in wireless communications, is a notion resulting from
the fullduplex (FD) operation. In a largescale network, FD also increases the
multiuser interference due to the large number of active wireless links that
exist. Hence, in order to realize the FD potentials, this interference needs to
be restricted. This paper presents a stochastic geometry model of FD cellular
networks where the users and base stations employ directional antennas. Based
on previous experimental results, we model the passive suppression of the LI at
each FD terminal as a function of the angle between the two antennas and show
the significant gains that can be achieved by this method. Together with the
reduction of multiuser interference resulting from antenna directionality, our
model demonstrates that FD can potentially be implemented in largescale
directional networks.

We consider a fullduplex decodeandforward system, where the wirelessly
powered relay employs the timeswitching protocol to receive power from the
source and then transmit information to the destination. It is assumed that the
relay node is equipped with two sets of antennas to enable fullduplex
communications. Three different interference mitigation schemes are studied,
namely, 1) optimal 2) zeroforcing and 3) maximum ratio combining/maximum ratio
transmission. We develop new outage probability expressions to investigate
delayconstrained transmission throughput of these schemes. Our analysis show
interesting performance comparisons of the considered precoding schemes for
different system and link parameters.

In this paper, we theoretically investigate a new technique for simultaneous
information and power transfer (SWIPT) in multipleinput multipleoutput (MIMO)
pointtopoint with radio frequency energy harvesting capabilities. The
proposed technique exploits the spatial decomposition of the MIMO channel and
uses the eigenchannels either to convey information or to transfer energy. In
order to generalize our study, we consider channel estimation error in the
decomposition process and the interference between the eigenchannels. An
optimization problem that minimizes the total transmitted power subject to
maximum power per eigenchannel, information and energy constraints is
formulated as a mixedinteger nonlinear program and solved to optimality using
mixedinteger secondorder cone programming. A nearoptimal mixedinteger
linear programming solution is also developed with robust computational
performance. A polynomial complexity algorithm is further proposed for the
optimal solution of the problem when no maximum power per eigenchannel
constraints are imposed. In addition, a low polynomial complexity algorithm is
developed for the power allocation problem with a given eigenchannel
assignment, as well as a lowcomplexity heuristic for solving the eigenchannel
assignment problem.

In nonorthogonal multiple access (NOMA) downlink, multiple data flows are
superimposed in the power domain and user decoding is based on successive
interference cancellation. NOMA's performance highly depends on the power split
among the data flows and the associated power allocation (PA) problem. In this
letter, we study NOMA from a fairness standpoint and we investigate PA
techniques that ensure fairness for the downlink users under i) instantaneous
channel state information (CSI) at the transmitter, and ii) average CSI.
Although the formulated problems are nonconvex, we have developed
lowcomplexity polynomial algorithms that yield the optimal solution in both
cases considered.

The implementation of fullduplex (FD) radio in wireless communications is a
potential approach for achieving higher spectral efficiency. A possible
application is its employment in the next generation of cellular networks.
However, the performance of largescale FD multiuser networks is an area mostly
unexplored. Most of the related work focuses on the performance analysis of
smallscale networks or on loop interference cancellation schemes. In this
paper, we derive the outage probability performance of largescale FD cellular
networks in the context of two architectures: twonode and threenode. We show
how the performance is affected with respect to the model's parameters and
provide a comparison between the two architectures.

We consider a wireless system with a fullduplex (FD) access point (AP) that
transmits to a scheduled user in the downlink (DL) channel, while receiving
data from an user in the uplink (UL) channel at the same time on the same
frequency. In this system, loopback interference (LI) at the AP and inter user
interference between the uplink (UL) user and downlink (DL) user can cause
performance degradation. In order to characterize the effects of LI and inter
user interference, we derive closedform expressions for the outage probability
and achievable sum rate of the system. In addition an asymptotic analysis that
reveals insights into the system behavior and performance degradation is
presented. Our results indicate that under certain conditions, FD transmissions
yield performance gains over halfduplex (HD) mode of operation.

In this paper we propose a powerefficient transfer of information and
energy, where we exploit the constructive part of wireless interference as a
source of green useful signal power. Rather than suppressing interference as in
conventional schemes, we take advantage of constructive interference among
users, inherent in the downlink, as a source of both useful information and
wireless energy. Specifically, we propose a new precoding design that minimizes
the transmit power while guaranteeing the quality of service (QoS) and energy
harvesting constraints for generic phase shift keying modulated signals. The
QoS constraints are modified to accommodate constructive interference. We
derive a suboptimal solution and a local optimum solution to the precoding
optimization problem. The proposed precoding reduces the transmit power
compared to conventional schemes, by adapting the constraints to accommodate
constructive interference as a source of useful signal power. Our simulation
results show significant power savings with the proposed dataaided precoding
compared to the conventional precoding.

We consider a dualhop fullduplex relaying system, where the energy
constrained relay node is powered by radio frequency signals from the source
using the timeswitching architecture, both the amplifyandforward and
decodeandforward relaying protocols are studied. Specifically, we provide an
analytical characterization of the achievable throughput of three different
communication modes, namely, instantaneous transmission, delayconstrained
transmission, and delay tolerant transmission. In addition, the optimal time
split is studied for different transmission modes. Our results reveal that,
when the time split is optimized, the fullduplex relaying could substantially
boost the system throughput compared to the conventional halfduplex relaying
architecture for all three transmission modes. In addition, it is shown that
the instantaneous transmission mode attains the highest throughput. However,
compared to the delayconstrained transmission mode, the throughput gap is
rather small. Unlike the instantaneous time split optimization which requires
instantaneous channel state information, the optimal time split in the
delayconstrained transmission mode depends only on the statistics of the
channel, hence, is suitable for practical implementations.

Energy harvesting for wireless communication networks is a new paradigm that
allows terminals to recharge their batteries from external energy sources in
the surrounding environment. A promising energy harvesting technology is
wireless power transfer where terminals harvest energy from electromagnetic
radiation. Thereby, the energy may be harvested opportunistically from ambient
electromagnetic sources or from sources that intentionally transmit
electromagnetic energy for energy harvesting purposes. A particularly
interesting and challenging scenario arises when sources perform simultaneous
wireless information and power transfer (SWIPT), as strong signals not only
increase power transfer but also interference. This paper provides an overview
of SWIPT systems with a particular focus on the hardware realization of
rectenna circuits and practical techniques that achieve SWIPT in the domains of
time, power, antennas, and space. The paper also discusses the benefits of a
potential integration of SWIPT technologies in modern communication networks in
the context of resource allocation and cooperative cognitive radio networks.

This article reexamines the fundamental notion of interference in wireless
networks by contrasting traditional approaches to new concepts that handle
interference in a creative way. Specifically, we discuss the fundamental limits
of the interference channel and present the interference alignment technique
and its extension of signal alignment techniques. Contrary to this traditional
view, which treats interference as a detrimental phenomenon, we introduce three
concepts that handle interference as a useful resource. The first concept
exploits interference at the modulation level and leads to simple multiuser
downlink precoding that provides significant energy savings. The second concept
uses radio frequency radiation for energy harvesting and handles interference
as a source of green energy. The last concept refers to a secrecy environment
and uses interference as an efficient means to jam potential eavesdroppers.
These three techniques bring a new vision about interference in wireless
networks and motivate a plethora of potential new applications and services.

In this paper we consider a simple cooperative network consisting of a
source, a destination and a cluster of decodeandforward halfduplex relays.
At each timeslot, the source and (possibly) one of the relays transmit a
packet to another relay and the destination, respectively, resulting in
interrelay interference (IRI). In this work, with the aid of buffers at the
relays, we mitigate the detrimental effect of IRI through interference
cancellation. More specifically, we propose the minpower scheme that minimizes
the total energy expenditure per time slot under an IRI cancellation scheme.
Apart from minimizing the energy expenditure, the minpower selection scheme,
also provides better throughput and lower outage probability than existing
works in the literature. It is the first time that interference cancellation is
combined with bufferaided relays and power adaptation to mitigate the IRI and
minimize the energy expenditure. The new relay selection policy is analyzed in
terms of outage probability and diversity, by modeling the evolution of the
relay buffers as a Markov Chain (MC). We construct the state transition matrix
of the MC, and hence obtain the steady state with which we can characterize the
outage probability. The proposed scheme outperforms relevant stateoftheart
relay selection schemes in terms of throughput, diversity and energy
efficiency, as demonstrated via examples.

Energy harvesting (EH) from ambient radiofrequency (RF) electromagnetic
waves is an efficient solution for fully autonomous and sustainable
communication networks. Most of the related works presented in the literature
are based on specific (and smallscale) network structures, which although give
useful insights on the potential benefits of the RFEH technology, cannot
characterize the performance of general networks. In this paper, we adopt a
largescale approach of the RFEH technology and we characterize the
performance of a network with random number of transmitterreceiver pairs by
using stochasticgeometry tools. Specifically, we analyze the outage
probability performance and the average harvested energy, when receivers employ
power splitting (PS) technique for "simultaneous" information and energy
transfer. A noncooperative scheme, where information/energy are conveyed only
via direct links, is firstly considered and the outage performance of the
system as well as the average harvested energy are derived in closed form in
function of the power splitting. For this protocol, an interesting optimization
problem which minimizes the transmitted power under outage probability and
harvesting constraints, is formulated and solved in closed form. In addition,
we study a cooperative protocol where sources' transmissions are supported by a
random number of potential relays that are randomly distributed into the
network. In this case, information/energy can be received at each destination
via two independent and orthogonal paths (in case of relaying). We characterize
both performance metrics, when a selection combining scheme is applied at the
receivers and a single relay is randomly selected for cooperative diversity.

We consider a multiuser multipleinput singleoutput interference channel
where the receivers are characterized by both qualityofservice (QoS) and
radiofrequency (RF) energy harvesting (EH) constraints. We consider the power
splitting RFEH technique where each receiver divides the received signal into
two parts a) for information decoding and b) for battery charging. The minimum
required power that supports both the QoS and the RFEH constraints is
formulated as an optimization problem that incorporates the transmitted power
and the beamforming design at each transmitter as well as the power splitting
ratio at each receiver. We consider both the cases of fixed beamforming and
when the beamforming design is incorporated into the optimization problem. For
fixed beamforming we study three standard beamforming schemes, the zeroforcing
(ZF), the regularized zeroforcing (RZF) and the maximum ratio transmission
(MRT); a hybrid scheme, MRTZF, comprised of a linear combination of MRT and ZF
beamforming is also examined. The optimal solution for ZF beamforming is
derived in closedform, while optimization algorithms based on secondorder
cone programming are developed for MRT, RZF and MRTZF beamforming to solve the
problem. In addition, the jointoptimization of beamforming and power
allocation is studied using semidefinite programming (SDP) with the aid of rank
relaxation.