• ### Quantum Interference of Glory Rescattering in Strong-Field Atomic Ionization(1708.04374)

Oct. 7, 2018 physics.atom-ph
During the ionization of atoms irradiated by linearly polarized intense laser fields, we find for the first time that the transverse momentum distribution of photoelectrons can be well fitted by a squared zeroth-order Bessel function because of the quantum interference effect of Glory rescattering. The characteristic of the Bessel function is determined by the common angular momentum of a bunch of semiclassical paths termed as Glory trajectories, which are launched with different nonzero initial transverse momenta distributed on a specific circle in the momentum plane and finally deflected to the same asymptotic momentum, which is along the polarization direction, through post-tunneling rescattering. Glory rescattering theory (GRT) based on the semiclassical path-integral formalism is developed to address this effect quantitatively. Our theory can resolve the long-standing discrepancies between existing theories and experiments on the fringe location, predict the sudden transition of the fringe structure in holographic patterns, and shed light on the quantum interference aspects of low-energy structures in strong-field atomic ionization.
• ### Diagonal Nematicity in the Pseudogap Phase of HgBa$_2$CuO$_{4+\delta}$(1805.00276)

The pseudogap phenomenon in cuprates is the most mysterious puzzle in the research of high-temperature superconductivity. In particular, whether the pseudogap is associated with a crossover or phase transition has been a long-standing controversial issue. The tetragonal cuprate HgBa$_2$CuO$_{4+\delta}$, with only one CuO$_2$ layer per primitive cell, is an ideal system to tackle this puzzle. Here, we measure the anisotropy of magnetic susceptibility within the CuO$_2$ plane with exceptionally high-precision magnetic torque experiments. Our key finding is that a distinct two-fold in-plane anisotropy sets in below the pseudogap temperature $T^*$, which provides thermodynamic evidence for a nematic phase transition with broken four-fold symmetry. Most surprisingly, the nematic director orients along the diagonal direction of the CuO$_2$ square lattice, in sharp contrast to the bond nematicity reported in various iron-based superconductors and double-layer YBa$_2$Cu$_3$O$_{6+\delta}$, where the anisotropy axis is along the Fe-Fe and Cu-O-Cu directions, respectively. Another remarkable feature is that the enhancement of the diagonal nematicity with decreasing temperature is suppressed around the temperature at which short-range charge-density-wave (CDW) formation occurs. This is in stark contrast to YBa$_2$Cu$_3$O$_{6+\delta}$, where the bond nematicity is not influenced by the CDW. Our result suggests a competing relationship between diagonal nematic and CDW order in HgBa$_2$CuO$_{4+\delta}$.
• ### Coulomb Rescattering in Nondipole Interaction of Atoms with Intense Laser Fields(1612.04939)

Dec. 15, 2016 physics.atom-ph
We investigate the ionization dynamics of atoms irradiated by an intense laser field using a semiclassical model that includes magnetic Lorentz force in the rescattering process. We find that, the electrons tunneled with different initial transverse momenta (i.e., perpendicular to the instantaneous electric field direction) distributed on a specific circle in the momentum plane can finally converge to the same transverse momentum after experiencing Coulomb forward scattering. These electron trajectories lead to a bright spot structure in the 2D transverse momentum distribution, and particularly in the long-wavelength limit, a nonzero momentum peak in the direction antiparallel to the laser propagation (or radiation pressure) direction. Making analysis of the subcycle dynamics of rescattering trajectories, we unveil the underlying mechanism of the anti-intuitive peak. Beyond the strong field approximation and the dipole approximation, we quantitatively predict the spot center and the peak position. Our results are compared with a recent experiment and some theoretical predictions are given.
• ### Beam Test Results for New Full-scale GEM Prototypes for a Future Upgrade of the CMS High-eta Muon System(1211.3939)

Nov. 16, 2012 physics.ins-det
The CMS GEM collaboration is considering Gas Electron Multipliers (GEMs) for upgrading the CMS forward muon system in the 1.5<|eta|<2.4 endcap region. GEM detectors can provide precision tracking and fast trigger information. They would improve the CMS muon trigger and muon momentum resolution and provide missing redundancy in the high-eta region. Employing a new faster construction and assembly technique, we built four full-scale Triple-GEM muon detectors for the inner ring of the first muon endcap station. We plan to install these or further improved versions in CMS during the first long LHC shutdown in 2013/14 for continued testing. These detectors are designed for the stringent rate and resolution requirements in the increasingly hostile environments expected at CMS after the second long LHC shutdown in 2018/19. The new prototypes were studied in muon/pion beams at the CERN SPS. We discuss our experience with constructing the new full-scale production prototypes and present preliminary performance results from the beam test. We also tested smaller Triple-GEM prototypes with zigzag readout strips with 2 mm pitch in these beams and measured a spatial resolution of 73 microns. This readout offers a potential reduction of channel count and consequently electronics cost for this system while maintaining high spatial resolution.
• ### CMS Resistive Plate Chamber overview, from the present system to the upgrade phase I(1209.1941)

Sept. 10, 2012 hep-ex, physics.ins-det
University of Sofia, Faculty of Physics, Atomic Physics Department, 5, James Bourchier Boulevard, BG-1164 Sofia, Bulgaria Ghent University, Department of Physics and Astronomy, Proeftuinstraat 86, BE-9000 Ghent, Belgium Bulgarian Academy of Sciences, Inst. for Nucl. Res. and Nucl. Energy, Tzarigradsko shaussee Boulevard 72, BG-1784 Sofia, Bulgaria Peking University, Department of Technical Physics, CN-100 871 Beijing, China Universidad de Los Andes, Apartado A\'ereo 4976, Carrera 1E, no. 18A 10, CO-Bogot\'a, Colombia Academy of Scientific Research and Technology of the Arab Republic of Egypt, 101 Sharia Kasr El-Ain, Cairo, Egypt Panjab University, Department of Physics, Chandigarh Mandir 160 014, India Universita e INFN, Sezione di Bari, Via Orabona 4, IT-70126 Bari, Italy INFN, Laboratori Nazionali di Frascati, PO Box 13, Via Enrico Fermi 40, IT-00044 Frascati, Italy Universita e INFN, Sezione di Napoli, Complesso Univ. Monte S. Angelo, Via Cintia, IT-80126 Napoli, Italy Universita e INFN, Sezione di Pavia, Via Bassi 6, IT-Pavia, Italy Department of Physics and Korea Detector Laboratory, Korea University, Aman-dong 5-ga, Sungbuk-gu, Seou,l Republic of Korea Sungkyunkwan University, Department of Physics 2066, Seobu-ro, Jangan-gu, Suwon, Gyeonggi-Do, Republic of Korea
• ### Uniformity and Stability of the CMS RPC Detector at the LHC(1209.1989)

Sept. 10, 2012 hep-ex, physics.ins-det
The Resistive Plate Chambers (RPCs) are employed in the CMS experiment at the LHC as dedicated trigger system both in the barrel and in the endcap. This note presents results of the RPC detector uniformity and stability during the 2011 data taking period, and preliminary results obtained with 2012 data. The detector uniformity has been ensured with a dedicated High Voltage scan with LHC collisions, in order to determine the optimal operating working voltage of each individual RPC chamber installed in CMS. Emphasis is given on the procedures and results of the High Voltage calibration. Moreover, an increased detector stability has been obtained by automatically taking into account temperature and atmospheric pressure variations in the CMS cavern.
• ### High level software for 4.8 GHz LHC Schottky system(1208.2670)

Aug. 13, 2012 physics.acc-ph
The performance of the LHC depends critically on the accurate measurements of the betatron tunes. The betatron tune values of each LHC beam may be measured without excitation using a newly installed transverse Schottky monitor. A high-level software package written in Java has been developed for the Schottky system. The software allows end users to monitor and control the Schottky system, and provides them with non-destructive and continuous bunch-by-bunch measurements for the tunes, momentum spreads, chromaticities and emittances of the LHC beams. It has been tested with both proton and lead ion beams at the LHC with very successful results.
• ### Construction and Performance of Large-Area Triple-GEM Prototypes for Future Upgrades of the CMS Forward Muon System(1111.7249)

Nov. 30, 2011 hep-ex, physics.ins-det
At present, part of the forward RPC muon system of the CMS detector at the CERN LHC remains uninstrumented in the high-\eta region. An international collaboration is investigating the possibility of covering the 1.6 < |\eta| < 2.4 region of the muon endcaps with large-area triple-GEM detectors. Given their good spatial resolution, high rate capability, and radiation hardness, these micro-pattern gas detectors are an appealing option for simultaneously enhancing muon tracking and triggering capabilities in a future upgrade of the CMS detector. A general overview of this feasibility study will be presented. The design and construction of small (10\times10 cm2) and full-size trapezoidal (1\times0.5 m2) triple-GEM prototypes will be described. During detector assembly, different techniques for stretching the GEM foils were tested. Results from measurements with x-rays and from test beam campaigns at the CERN SPS will be shown for the small and large prototypes. Preliminary simulation studies on the expected muon reconstruction and trigger performances of this proposed upgraded muon system will be reported.
• ### Test beam results of the GE1/1 prototype for a future upgrade of the CMS high-$\eta$ muon system(1111.4883)

Nov. 30, 2011 hep-ex, physics.ins-det
Gas Electron Multipliers (GEM) are an interesting technology under consideration for the future upgrade of the forward region of the CMS muon system, specifically in the $1.6<| \eta |<2.4$ endcap region. With a sufficiently fine segmentation GEMs can provide precision tracking as well as fast trigger information. The main objective is to contribute to the improvement of the CMS muon trigger. The construction of large-area GEM detectors is challenging both from the technological and production aspects. In view of the CMS upgrade we have designed and built the largest full-size Triple-GEM muon detector, which is able to meet the stringent requirements given the hostile environment at the high-luminosity LHC. Measurements were performed during several test beam campaigns at the CERN SPS in 2010 and 2011. The main issues under study are efficiency, spatial resolution and timing performance with different inter-electrode gap configurations and gas mixtures. In this paper results of the performance of the prototypes at the beam tests will be discussed.
• ### Characterization of GEM Detectors for Application in the CMS Muon Detection System(1012.3675)

Dec. 16, 2010 hep-ex, physics.ins-det
The muon detection system of the Compact Muon Solenoid experiment at the CERN Large Hadron Collider is based on different technologies for muon tracking and triggering. In particular, the muon system in the endcap disks of the detector consists of Resistive Plate Chambers for triggering and Cathode Strip Chambers for tracking. At present, the endcap muon system is only partially instrumented with the very forward detector region remaining uncovered. In view of a possible future extension of the muon endcap system, we report on a feasibility study on the use of Micro-Pattern Gas Detectors, in particular Gas Electron Multipliers, for both muon triggering and tracking. Results on the construction and characterization of small tripleGas Electron Multiplier prototype detectors are presented.
• ### Construction of the first full-size GEM-based prototype for the CMS high-$\eta$ muon system(1012.1524)

Dec. 9, 2010 hep-ex, physics.ins-det
In view of a possible extension of the forward CMS muon detector system and future LHC luminosity upgrades, Micro-Pattern Gas Detectors (MPGDs) are an appealing technology. They can simultaneously provide precision tracking and fast trigger information, as well as sufficiently fine segmentation to cope with high particle rates in the high-eta region at LHC and its future upgrades. We report on the design and construction of a full-size prototype for the CMS endcap system, the largest Triple-GEM detector built to-date. We present details on the 3D modeling of the detector geometry, the implementation of the readout strips and electronics, and the detector assembly procedure.
• ### Particle size effect on strength, failure and shock behavior in Polytetrafluoroethylene-Al-W granular composites(0806.1775)

The variation of metallic particle size and sample porosity significantly alters the dynamic mechanical properties of high density granular composites processed using a cold isostatically pressed mixture of polytetrafluoroethylene (PTFE), aluminum (Al) and tungsten (W) powders. Quasi-static and dynamic experiments are performed with identical constituent mass fractions with variations in the size of the W particles and pressing conditions. The relatively weak polymer matrix allows the strength and fracture modes of this material to be governed by the granular type behavior of agglomerated metal particles. A higher ultimate compressive strength was observed in relatively high porosity samples with small W particles compared to those with coarse W particles in all experiments. Mesoscale granular force chains comprised of the metallic particles explain this unusual phenomenon as observed in a hydrocode simulation of a drop-weight test. Macrocracks forming below the critical failure strain for the matrix and unusual behavior due to a competition between densification and fracture in dynamic tests of porous samples were also observed. Shock loading of this granular composite resulted in higher fraction of total internal energy deposition in the soft PTFE matrix, specifically thermal energy, which can be tailored by the W particle size distribution.
• ### The influence of metallic particle size on the mechanical properties of PTFE-Al-W powder composites(0709.2172)

The dynamic mechanical properties of reactive materials (e.g., high density mixtures of polytetraflouroethylene (PTFE), aluminum (Al) and tungsten (W) powders) can be tailored by changing the morphology of the particles and porosity. Cold isostatically pressed PTFE-Al-W powder composites with fine metallic particles and a higher porosity exhibited higher ultimate compressive strength than less porous composites having equivalent mass ratios with coarse W particles. The mesoscale force chains between the fine metallic particles are responsible for this unusual phenomenon. We observed macrocracks below the critical failure strain for the matrix and a competition between densification and fracture in some porous samples in dynamic tests.
• ### Simulation of Particle Size Effect on Dynamic Properties and Fracture of PTFE-W-Al Composites(0708.1205)

Recent investigations of the dynamic compressive strength of cold isostatically pressed composites of polytetrafluoroethylene (PTFE), tungsten (W) and aluminum (Al) powders show significant differences depending on the size of metallic particles. The addition of W increases the density and overall strength of the sample. To investigate relatively large deformations multi-material Eulerian and arbitrary Lagrangian-Eulerian methods, which have the ability to efficiently handle the formation of free surfaces, were used. The calculations indicate that the increased strength of the sample with fine metallic particles is due to the formation of force chains under dynamic loading. This phenomenon occurs even at larger porosity of the PTFE matrix in comparison with samples with larger particle size of W and higher density of the PTFE matrix.
• ### A New Non-Iterative Decoding Algorithm for the Erasure Channel : Comparisons with Enhanced Iterative Methods(cs/0503006)

March 2, 2005 cs.IT, math.IT
This paper investigates decoding of binary linear block codes over the binary erasure channel (BEC). Of the current iterative decoding algorithms on this channel, we review the Recovery Algorithm and the Guess Algorithm. We then present a Multi-Guess Algorithm extended from the Guess Algorithm and a new algorithm -- the In-place Algorithm. The Multi-Guess Algorithm can push the limit to break the stopping sets. However, the performance of the Guess and the Multi-Guess Algorithm depend on the parity-check matrix of the code. Simulations show that we can decrease the frame error rate by several orders of magnitude using the Guess and the Multi-Guess Algorithms when the parity-check matrix of the code is sparse. The In-place Algorithm can obtain better performance even if the parity check matrix is dense. We consider the application of these algorithms in the implementation of multicast and broadcast techniques on the Internet. Using these algorithms, a user does not have to wait until the entire transmission has been received.