-
The Muon (g-2) Experiment, E989 at Fermilab, will measure the muon anomalous
magnetic moment a factor-of-four more precisely than was done in E821 at the
Brookhaven National Laboratory AGS. The E821 result appears to be greater than
the Standard-Model prediction by more than three standard deviations. When
combined with expected improvement in the Standard-Model hadronic
contributions, E989 should be able to determine definitively whether or not the
E821 result is evidence for physics beyond the Standard Model. After a review
of the physics motivation and the basic technique, which will use the muon
storage ring built at BNL and now relocated to Fermilab, the design of the new
experiment is presented. This document was created in partial fulfillment of
the requirements necessary to obtain DOE CD-2/3 approval.
-
Colossal two-phase Liquid Argon Time Projection Chambers (LAr TPCs) are a
proposed option for future long-baseline neutrino experiments. This study
illustrates the feasibility of using an EMCCD camera to capture light induced
by single cosmic events in a two-phase LAr TPC employing a THGEM. An Andor iXon
Ultra 897 EMCCD camera was externally mounted via a borosilicate glass viewport
on the Liverpool two-phase LAr TPC. The camera successfully captured the
secondary scintillation light produced at the THGEM holes that had been induced
by cosmic events. The light collection capability of the camera for various
EMCCD gains was assessed. For a THGEM gain of 64 and an EMCCD gain of 1000,
clear images were captured with an average signal-to-noise ratio of 6.
Preliminary 3D reconstruction of straight cosmic muon tracks has been performed
by combining the camera images, PMT signals and THGEM charge data.
Reconstructed cosmic muon tracks were used to determine THGEM gain and to
calibrate the intensity levels of the EMCCD image.
-
The Vertex Locator (VELO) is a silicon microstrip detector that surrounds the
proton-proton interaction region in the LHCb experiment. The performance of the
detector during the first years of its physics operation is reviewed. The
system is operated in vacuum, uses a bi-phase CO2 cooling system, and the
sensors are moved to 7 mm from the LHC beam for physics data taking. The
performance and stability of these characteristic features of the detector are
described, and details of the material budget are given. The calibration of the
timing and the data processing algorithms that are implemented in FPGAs are
described. The system performance is fully characterised. The sensors have a
signal to noise ratio of approximately 20 and a best hit resolution of 4
microns is achieved at the optimal track angle. The typical detector occupancy
for minimum bias events in standard operating conditions in 2011 is around
0.5%, and the detector has less than 1% of faulty strips. The proximity of the
detector to the beam means that the inner regions of the n+-on-n sensors have
undergone space-charge sign inversion due to radiation damage. The VELO
performance parameters that drive the experiment's physics sensitivity are also
given. The track finding efficiency of the VELO is typically above 98% and the
modules have been aligned to a precision of 1 micron for translations in the
plane transverse to the beam. A primary vertex resolution of 13 microns in the
transverse plane and 71 microns along the beam axis is achieved for vertices
with 25 tracks. An impact parameter resolution of less than 35 microns is
achieved for particles with transverse momentum greater than 1 GeV/c.
-
This paper presents a preliminary study into the use of CCDs to image
secondary scintillation light generated by THick Gas Electron Multipliers
(THGEMs) in a two phase LAr TPC. A Sony ICX285AL CCD chip was mounted above a
double THGEM in the gas phase of a 40 litre two-phase LAr TPC with the majority
of the camera electronics positioned externally via a feedthrough. An Am-241
source was mounted on a rotatable motion feedthrough allowing the positioning
of the alpha source either inside or outside of the field cage. Developed for
and incorporated into the TPC design was a novel high voltage feedthrough
featuring LAr insulation. Furthermore, a range of webcams were tested for
operation in cryogenics as an internal detector monitoring tool. Of the range
of webcams tested the Microsoft HD-3000 (model no:1456) webcam was found to be
superior in terms of noise and lowest operating temperature.
In ambient temperature and atmospheric pressure 1 ppm pure argon gas, the
THGEM gain was approximately 1000 and using a 1 msec exposure the CCD captured
single alpha tracks. Successful operation of the CCD camera in two-phase
cryogenic mode was also achieved. Using a 10 sec exposure a photograph of
secondary scintillation light induced by the Am-241 source in LAr has been
captured for the first time.
-
Decays of b hadrons into final states containing a D0 meson and a muon are
used to measure the b anti-b production cross-section in proton-proton
collisions at a centre-of-mass energy of 7 TeV at the LHC. In the
pseudorapidity interval 2 < eta < 6 and integrated over all transverse momenta
we find that the average cross-section to produce b-flavoured or
anti-b-flavoured hadrons is (75.3 +/- 5.4 +/- 13.0) microbarns.
-
The production of K_short mesons in pp collisions at a centre-of-mass energy
of 0.9 TeV is studied with the LHCb detector at the Large Hadron Collider. The
luminosity of the analysed sample is determined using a novel technique,
involving measurements of the beam currents, sizes and positions, and is found
to be 6.8 +/- 1.0 microbarn^-1. The differential prompt K_short production
cross-section is measured as a function of the K_short transverse momentum and
rapidity in the region 0 < pT < 1.6 GeV/c and 2.5 < y < 4.0. The data are found
to be in reasonable agreement with previous measurements and generator
expectations.
-
Measurements of dielectron production in p+p and p+d collisions with beam
kinetic energies from 1.04 to 4.88 GeV are presented. The differential cross
section is presented as a function of invariant pair mass, transverse momentum,
and rapidity. The shapes of the mass spectra and their evolution with beam
energy provide information about the relative importance of the various
dielectron production mechanisms in this energy regime. The p+d to p+p ratio of
the dielectron yield is also presented as a function of invariant pair mass,
transverse momentum, and rapidity. The shapes of the transverse momentum and
rapidity spectra from the p+d and p+p systems are found to be similar to one
another for each of the beam energies studied. The beam energy dependence of
the integrated cross sections is also presented.
-
We present measured dielectron production cross sections for Ca+Ca, C+C,
He+Ca, and d+Ca reactions at 1.0 A GeV. Statistical uncertainties and
systematic effects are smaller than in previous DLS nucleus-nucleus data. For
pair mass < 0.35 GeV/c2 : 1) the Ca+Ca cross section is larger than the
previous DLS measurement and current model results, 2) the mass spectra suggest
large contributions from pi0 and eta Dalitz decays, and 3) dsigma/dM is
proportional to ApAt. For M > 0.5 GeV/c2 the Ca+Ca to C+C cross section ratio
is significantly larger than the ratio of ApAt values.
-
The DLS collaboration has recently completed a high statistics study of
dilepton production at the Bevalac. In particular, we have measured dielectrons
(e+e-) from p-p and p-d collisions to understand the basic dilepton production
mechanisms in the energy range from 1.05 - 4.9 GeV. These data can be used to
determine the basic processes which contribute to nucleon-nucleon dilepton
production such as hadronic bremsstrahlung, vector meson processes, and
hadronic Dalitz decay. The data show that a simple elastic bremsstrahlung
calculation is insufficient to explain the data. Theoretical models are
compared with the data. A new high statistics study of Ca-Ca at 1.05 A GeV has
been made to study the collectivity of A-A collisions.
Colossal two-phase Liquid Argon Time Projection Chambers (LAr TPCs) are a proposed option for future long-baseline neutrino experiments. This study illustrates the feasibility of using an EMCCD camera to capture light induced by single cosmic events in a two-phase LAr TPC employing a THGEM. An Andor iXon Ultra 897 EMCCD camera was externally mounted via a borosilicate glass viewport on the Liverpool two-phase LAr TPC. The camera successfully captured the secondary scintillation light produced at the THGEM holes that had been induced by cosmic events. The light collection capability of the camera for various EMCCD gains was assessed. For a THGEM gain of 64 and an EMCCD gain of 1000, clear images were captured with an average signal-to-noise ratio of 6. Preliminary 3D reconstruction of straight cosmic muon tracks has been performed by combining the camera images, PMT signals and THGEM charge data. Reconstructed cosmic muon tracks were used to determine THGEM gain and to calibrate the intensity levels of the EMCCD image.
The Vertex Locator (VELO) is a silicon microstrip detector that surrounds the proton-proton interaction region in the LHCb experiment. The performance of the detector during the first years of its physics operation is reviewed. The system is operated in vacuum, uses a bi-phase CO2 cooling system, and the sensors are moved to 7 mm from the LHC beam for physics data taking. The performance and stability of these characteristic features of the detector are described, and details of the material budget are given. The calibration of the timing and the data processing algorithms that are implemented in FPGAs are described. The system performance is fully characterised. The sensors have a signal to noise ratio of approximately 20 and a best hit resolution of 4 microns is achieved at the optimal track angle. The typical detector occupancy for minimum bias events in standard operating conditions in 2011 is around 0.5%, and the detector has less than 1% of faulty strips. The proximity of the detector to the beam means that the inner regions of the n+-on-n sensors have undergone space-charge sign inversion due to radiation damage. The VELO performance parameters that drive the experiment's physics sensitivity are also given. The track finding efficiency of the VELO is typically above 98% and the modules have been aligned to a precision of 1 micron for translations in the plane transverse to the beam. A primary vertex resolution of 13 microns in the transverse plane and 71 microns along the beam axis is achieved for vertices with 25 tracks. An impact parameter resolution of less than 35 microns is achieved for particles with transverse momentum greater than 1 GeV/c.
This paper presents a preliminary study into the use of CCDs to image secondary scintillation light generated by THick Gas Electron Multipliers (THGEMs) in a two phase LAr TPC. A Sony ICX285AL CCD chip was mounted above a double THGEM in the gas phase of a 40 litre two-phase LAr TPC with the majority of the camera electronics positioned externally via a feedthrough. An Am-241 source was mounted on a rotatable motion feedthrough allowing the positioning of the alpha source either inside or outside of the field cage. Developed for and incorporated into the TPC design was a novel high voltage feedthrough featuring LAr insulation. Furthermore, a range of webcams were tested for operation in cryogenics as an internal detector monitoring tool. Of the range of webcams tested the Microsoft HD-3000 (model no:1456) webcam was found to be superior in terms of noise and lowest operating temperature. In ambient temperature and atmospheric pressure 1 ppm pure argon gas, the THGEM gain was approximately 1000 and using a 1 msec exposure the CCD captured single alpha tracks. Successful operation of the CCD camera in two-phase cryogenic mode was also achieved. Using a 10 sec exposure a photograph of secondary scintillation light induced by the Am-241 source in LAr has been captured for the first time.
Decays of b hadrons into final states containing a D0 meson and a muon are used to measure the b anti-b production cross-section in proton-proton collisions at a centre-of-mass energy of 7 TeV at the LHC. In the pseudorapidity interval 2 < eta < 6 and integrated over all transverse momenta we find that the average cross-section to produce b-flavoured or anti-b-flavoured hadrons is (75.3 +/- 5.4 +/- 13.0) microbarns.
The production of K_short mesons in pp collisions at a centre-of-mass energy of 0.9 TeV is studied with the LHCb detector at the Large Hadron Collider. The luminosity of the analysed sample is determined using a novel technique, involving measurements of the beam currents, sizes and positions, and is found to be 6.8 +/- 1.0 microbarn^-1. The differential prompt K_short production cross-section is measured as a function of the K_short transverse momentum and rapidity in the region 0 < pT < 1.6 GeV/c and 2.5 < y < 4.0. The data are found to be in reasonable agreement with previous measurements and generator expectations.