-
The population of large asteroids is thought to be primordial and they are
the most direct witnesses of the early history of our Solar System. Those
satellites allow study of the mass, and hence density and internal structure.
We study here the properties of the triple asteroid (107) Camilla from
lightcurves, stellar occultations, optical spectroscopy, and high-contrast and
high-angular-resolution images and spectro-images. Using 80 positions over 15
years, we determine the orbit of its larger satellite to be circular,
equatorial, and prograde, with RMS residuals of 7.8 mas. From 11 positions in
three epochs only, in 2015 and 2016, we determine a preliminary orbit for the
second satellite. We find the orbit to be somewhat eccentric and slightly
inclined to the primary's equatorial plane, reminiscent of the inner satellites
of other asteroid triple systems. Comparison of the near-infrared spectrum of
the larger satellite reveals no significant difference with Camilla. Hence,
these properties argue for a formation of the satellites by excavation from
impact and re-accumulation of ejecta. We determine the spin and 3-D shape of
Camilla. The model fits well each data set. We determine Camilla to be larger
than reported from modeling of mid-infrared photometry, with a
spherical-volume-equivalent diameter of 254 $\pm$ 36 km (3 $\sigma$
uncertainty), in agreement with recent results from shape modeling
(Hanus2017+). Combining the mass of (1.12 $\pm$ 0.01) $\times$ 10$^{19}$ kg
determined from the dynamics of the satellites and the volume from the 3-D
shape model, we determine a density of 1,280 $\pm$ 130 SI. From this density,
and considering Camilla's spectral similarities with (24) Themis and (65)
Cybele (for which water ice coating on surface grains was reported), we infer a
silicate-to-ice mass ratio of 1-6, with a 10-30% macroporosity.
-
With the adaptive optics (AO) system on the 10 m Keck-II telescope, we
acquired a high quality set of 84 images at 14 epochs of asteroid (52) Europa
on 2005 January 20. The epochs covered its rotation period and, by following
its changing shape and orientation on the plane of sky, we obtained its
triaxial ellipsoid dimensions and spin pole location. An independent
determination from images at three epochs obtained in 2007 is in good agreement
with these results. By combining these two data sets, along with a single epoch
data set obtained in 2003, we have derived a global fit for (52) Europa of
diameters (379x330x249) +/- (16x8x10) km, yielding a volume-equivalent
spherical-diameter of 315 +/- 7 km, and a rotational pole within 7 deg of [RA;
Dec] = [257,+12] in an Equatorial J2000 reference frame (ECJ2000: 255,+35).
Using the average of all mass determinations available forEuropa, we derive a
density of 1.5 +/- 0.4, typical of C-type asteroids. Comparing our images with
the shape model of Michalowski et al. (A&A 416, 2004), derived from optical
lightcurves, illustrates excellent agreement, although several edge features
visible in the images are not rendered by the model. We therefore derived a
complete 3-D description of Europa's shape using the KOALA algorithm by
combining our imaging epochs with 4 stellar occultations and 49 lightcurves. We
use this 3-D shape model to assess these departures from ellipsoidal shape.
Flat facets (possible giant craters) appear to be less distinct on (52) Europa
than on other C-types that have been imaged in detail. We show that fewer giant
craters, or smaller craters, is consistent with its expected impact history.
Overall, asteroid (52) Europa is still well modeled as a smooth triaxial
ellipsoid with dimensions constrained by observations obtained over several
apparitions.
-
We present a comparison of our results from ground-based observations of
asteroid (21) Lutetia with imaging data acquired during the flyby of the
asteroid by the ESA Rosetta mission. This flyby provided a unique opportunity
to evaluate and calibrate our method of determination of size, 3-D shape, and
spin of an asteroid from ground-based observations. We present our 3-D
shape-modeling technique KOALA which is based on multi-dataset inversion. We
compare the results we obtained with KOALA, prior to the flyby, on asteroid
(21) Lutetia with the high-spatial resolution images of the asteroid taken with
the OSIRIS camera on-board the ESA Rosetta spacecraft, during its encounter
with Lutetia. The spin axis determined with KOALA was found to be accurate to
within two degrees, while the KOALA diameter determinations were within 2% of
the Rosetta-derived values. The 3-D shape of the KOALA model is also confirmed
by the spectacular visual agreement between both 3-D shape models (KOALA pre-
and OSIRIS post-flyby). We found a typical deviation of only 2 km at local
scales between the profiles from KOALA predictions and OSIRIS images, resulting
in a volume uncertainty provided by KOALA better than 10%. Radiometric
techniques for the interpretation of thermal infrared data also benefit greatly
from the KOALA shape model: the absolute size and geometric albedo can be
derived with high accuracy, and thermal properties, for example the thermal
inertia, can be determined unambiguously. We consider this to be a validation
of the KOALA method. Because space exploration will remain limited to only a
few objects, KOALA stands as a powerful technique to study a much larger set of
small bodies using Earth-based observations.
-
We seek the best size estimates of the asteroid (21) Lutetia, the direction
of its spin axis, and its bulk density, assuming its shape is well described by
a smooth featureless triaxial ellipsoid, and to evaluate the deviations from
this assumption. Methods. We derive these quantities from the outlines of the
asteroid in 307 images of its resolved apparent disk obtained with adaptive
optics (AO) at Keck II and VLT, and combine these with recent mass
determinations to estimate a bulk density. Our best triaxial ellipsoid
diameters for Lutetia, based on our AO images alone, are a x b x c = 132 x 101
x 93 km, with uncertainties of 4 x 3 x 13 km including estimated systematics,
with a rotational pole within 5 deg. of ECJ2000 [long,lat] = [45, -7], or
EQJ2000 [RA, DEC] = [44, +9]. The AO model fit itself has internal precisions
of 1 x 1 x 8 km, but it is evident, both from this model derived from limited
viewing aspects and the radius vector model given in a companion paper, that
Lutetia has significant departures from an idealized ellipsoid. In particular,
the long axis may be overestimated from the AO images alone by about 10 km.
Therefore, we combine the best aspects of the radius vector and ellipsoid model
into a hybrid ellipsoid model, as our final result, of 124 +/- 5 x 101 +/- 4 x
93 +/- 13 km that can be used to estimate volumes, sizes, and projected areas.
The adopted pole position is within 5 deg. of [long, lat] = [52, -6] or[RA DEC]
= [52, +12]. Using two separately determined masses and the volume of our
hybrid model, we estimate a density of 3.5 +/- 1.1 or 4.3 +/- 0.8 g cm-3 . From
the density evidence alone, we argue that this favors an enstatite-chondrite
composition, although other compositions are formally allowed at the extremes
(low-porosity CV/CO carbonaceous chondrite or high-porosity metallic). We
discuss this in the context of other evidence.
-
Aims. We determine the physical properties (spin state and shape) of asteroid
(21) Lutetia, target of the ESA Rosetta mission, to help in preparing for
observations during the flyby on 2010 July 10 by predicting the orientation of
Lutetia as seen from Rosetta.
Methods. We use our novel KOALA inversion algorithm to determine the physical
properties of asteroids from a combination of optical lightcurves,
disk-resolved images, and stellar occultations, although the latter are not
available for (21) Lutetia.
Results. We find the spin axis of (21) Lutetia to lie within 5 degrees of
({\lambda} = 52 deg., {\beta} = -6 deg.) in Ecliptic J2000 reference frame
(equatorial {\alpha} = 52 deg., {\delta} = +12 deg.), and determine an improved
sidereal period of 8.168 270 \pm 0.000 001 h. This pole solution implies the
southern hemisphere of Lutetia will be in "seasonal" shadow at the time of the
flyby. The apparent cross-section of Lutetia is triangular as seen "pole-on"
and more rectangular as seen "equator-on". The best-fit model suggests the
presence of several concavities. The largest of these is close to the north
pole and may be associated with large impacts.
With the adaptive optics (AO) system on the 10 m Keck-II telescope, we acquired a high quality set of 84 images at 14 epochs of asteroid (52) Europa on 2005 January 20. The epochs covered its rotation period and, by following its changing shape and orientation on the plane of sky, we obtained its triaxial ellipsoid dimensions and spin pole location. An independent determination from images at three epochs obtained in 2007 is in good agreement with these results. By combining these two data sets, along with a single epoch data set obtained in 2003, we have derived a global fit for (52) Europa of diameters (379x330x249) +/- (16x8x10) km, yielding a volume-equivalent spherical-diameter of 315 +/- 7 km, and a rotational pole within 7 deg of [RA; Dec] = [257,+12] in an Equatorial J2000 reference frame (ECJ2000: 255,+35). Using the average of all mass determinations available forEuropa, we derive a density of 1.5 +/- 0.4, typical of C-type asteroids. Comparing our images with the shape model of Michalowski et al. (A&A 416, 2004), derived from optical lightcurves, illustrates excellent agreement, although several edge features visible in the images are not rendered by the model. We therefore derived a complete 3-D description of Europa's shape using the KOALA algorithm by combining our imaging epochs with 4 stellar occultations and 49 lightcurves. We use this 3-D shape model to assess these departures from ellipsoidal shape. Flat facets (possible giant craters) appear to be less distinct on (52) Europa than on other C-types that have been imaged in detail. We show that fewer giant craters, or smaller craters, is consistent with its expected impact history. Overall, asteroid (52) Europa is still well modeled as a smooth triaxial ellipsoid with dimensions constrained by observations obtained over several apparitions.
We present a comparison of our results from ground-based observations of asteroid (21) Lutetia with imaging data acquired during the flyby of the asteroid by the ESA Rosetta mission. This flyby provided a unique opportunity to evaluate and calibrate our method of determination of size, 3-D shape, and spin of an asteroid from ground-based observations. We present our 3-D shape-modeling technique KOALA which is based on multi-dataset inversion. We compare the results we obtained with KOALA, prior to the flyby, on asteroid (21) Lutetia with the high-spatial resolution images of the asteroid taken with the OSIRIS camera on-board the ESA Rosetta spacecraft, during its encounter with Lutetia. The spin axis determined with KOALA was found to be accurate to within two degrees, while the KOALA diameter determinations were within 2% of the Rosetta-derived values. The 3-D shape of the KOALA model is also confirmed by the spectacular visual agreement between both 3-D shape models (KOALA pre- and OSIRIS post-flyby). We found a typical deviation of only 2 km at local scales between the profiles from KOALA predictions and OSIRIS images, resulting in a volume uncertainty provided by KOALA better than 10%. Radiometric techniques for the interpretation of thermal infrared data also benefit greatly from the KOALA shape model: the absolute size and geometric albedo can be derived with high accuracy, and thermal properties, for example the thermal inertia, can be determined unambiguously. We consider this to be a validation of the KOALA method. Because space exploration will remain limited to only a few objects, KOALA stands as a powerful technique to study a much larger set of small bodies using Earth-based observations.
We seek the best size estimates of the asteroid (21) Lutetia, the direction of its spin axis, and its bulk density, assuming its shape is well described by a smooth featureless triaxial ellipsoid, and to evaluate the deviations from this assumption. Methods. We derive these quantities from the outlines of the asteroid in 307 images of its resolved apparent disk obtained with adaptive optics (AO) at Keck II and VLT, and combine these with recent mass determinations to estimate a bulk density. Our best triaxial ellipsoid diameters for Lutetia, based on our AO images alone, are a x b x c = 132 x 101 x 93 km, with uncertainties of 4 x 3 x 13 km including estimated systematics, with a rotational pole within 5 deg. of ECJ2000 [long,lat] = [45, -7], or EQJ2000 [RA, DEC] = [44, +9]. The AO model fit itself has internal precisions of 1 x 1 x 8 km, but it is evident, both from this model derived from limited viewing aspects and the radius vector model given in a companion paper, that Lutetia has significant departures from an idealized ellipsoid. In particular, the long axis may be overestimated from the AO images alone by about 10 km. Therefore, we combine the best aspects of the radius vector and ellipsoid model into a hybrid ellipsoid model, as our final result, of 124 +/- 5 x 101 +/- 4 x 93 +/- 13 km that can be used to estimate volumes, sizes, and projected areas. The adopted pole position is within 5 deg. of [long, lat] = [52, -6] or[RA DEC] = [52, +12]. Using two separately determined masses and the volume of our hybrid model, we estimate a density of 3.5 +/- 1.1 or 4.3 +/- 0.8 g cm-3 . From the density evidence alone, we argue that this favors an enstatite-chondrite composition, although other compositions are formally allowed at the extremes (low-porosity CV/CO carbonaceous chondrite or high-porosity metallic). We discuss this in the context of other evidence.
Aims. We determine the physical properties (spin state and shape) of asteroid (21) Lutetia, target of the ESA Rosetta mission, to help in preparing for observations during the flyby on 2010 July 10 by predicting the orientation of Lutetia as seen from Rosetta. Methods. We use our novel KOALA inversion algorithm to determine the physical properties of asteroids from a combination of optical lightcurves, disk-resolved images, and stellar occultations, although the latter are not available for (21) Lutetia. Results. We find the spin axis of (21) Lutetia to lie within 5 degrees of ({\lambda} = 52 deg., {\beta} = -6 deg.) in Ecliptic J2000 reference frame (equatorial {\alpha} = 52 deg., {\delta} = +12 deg.), and determine an improved sidereal period of 8.168 270 \pm 0.000 001 h. This pole solution implies the southern hemisphere of Lutetia will be in "seasonal" shadow at the time of the flyby. The apparent cross-section of Lutetia is triangular as seen "pole-on" and more rectangular as seen "equator-on". The best-fit model suggests the presence of several concavities. The largest of these is close to the north pole and may be associated with large impacts.