This design report describes the construction plans for the world's first
multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's
energy by 4 additional, decelerating passes. All beams are returned for
deceleration in a single beam pipe with a large-momentum-aperture permanent
magnet FFAG optics. Cornell University has been pioneering a new class of
accelerators, Energy Recovery Linacs (ERLs), with a new characteristic set of
beam parameters. Technology has been prototyped that is essential for any high
brightness electron ERL. This includes a DC electron source and an SRF injector
Linac with world-record current and normalized brightness in a bunch train, a
high-current linac cryomodule, and a high-power beam stop, and several
diagnostics tools for high-current and high-brightness beams. All these are now
being used to construct a novel one-cryomodule ERL in Cornell's Wilson Lab.
Brookhaven National Laboratory (BNL) has designed a multi-turn ERL for eRHIC,
where beam is transported more than 20 times around the 4km long RHIC tunnel.
The number of transport lines is minimized by using two arcs with
strongly-focusing permanent magnets that can control many beams of different
energies. A collaboration between BNL and Cornell has been formed to
investigate this multi-turn eRHIC ERL design by building a 4-turn,
one-cryomodule ERL at Cornell. It also has a return loop built with strongly
focusing permanent magnets and is meant to accelerate 40mA beam to 150MeV. This
high-brightness beam will have applications beyond accelerator research, in
industry, in nuclear physics, and in X-ray science.
Orbital period in a ring accelerator and time of flight in a linear
accelerator depend on the amplitude of betatron oscillations. The variation is
negligible in ordinary particle accelerators with relatively small beam
emittance. In an accelerator for large emittance beams like muons and unstable
nuclei, however, this effect cannot be ignored. We measured orbital period in a
linear non-scaling fixed field alternating gradient (FFAG) accelerator, which
is a candidate for muon acceleration, and compared with the theoretical
prediction. The good agreement between them gives important ground for the
design of particle accelerators for a new generation of particle and nuclear
The International Design Study for the Neutrino Factory (the IDS-NF) was
established by the community at the ninth "International Workshop on Neutrino
Factories, super-beams, and beta- beams" which was held in Okayama in August
2007. The IDS-NF mandate is to deliver the Reference Design Report (RDR) for
the facility on the timescale of 2012/13. In addition, the mandate for the
study  requires an Interim Design Report to be delivered midway through the
project as a step on the way to the RDR. This document, the IDR, has two
functions: it marks the point in the IDS-NF at which the emphasis turns to the
engineering studies required to deliver the RDR and it documents baseline
concepts for the accelerator complex, the neutrino detectors, and the
instrumentation systems. The IDS-NF is, in essence, a site-independent study.
Example sites, CERN, FNAL, and RAL, have been identified to allow site-specific
issues to be addressed in the cost analysis that will be presented in the RDR.
The choice of example sites should not be interpreted as implying a preferred
choice of site for the facility.