
Supervised learning frequently boils down to determining hidden and bright
parameters in a parameterized hypothesis space based on finite inputoutput
samples. The hidden parameters determine the attributions of hidden predictors
or the nonlinear mechanism of an estimator, while the bright parameters
characterize how hidden predictors are linearly combined or the linear
mechanism. In traditional learning paradigm, hidden and bright parameters are
not distinguished and trained simultaneously in one learning process. Such an
onestage learning (OSL) brings a benefit of theoretical analysis but suffers
from the high computational burden. To overcome this difficulty, a twostage
learning (TSL) scheme, featured by learning through deterministic assignment of
hidden parameters (LtDaHP) was proposed, which suggests to deterministically
generate the hidden parameters by using minimal Riesz energy points on a sphere
and equally spaced points in an interval. We theoretically show that with such
deterministic assignment of hidden parameters, LtDaHP with a neural network
realization almost shares the same generalization performance with that of OSL.
We also present a series of simulations and application examples to support the
outperformance of LtDaHP

This paper proposes a novel method to filter out the false alarm of LiDAR
system by using the temporal correlation of target reflected photons. Because
of the inevitable noise, which is due to background light and dark counts of
the detector, the depth imaging of LiDAR system exists a large estimation
error. Our method combines the Poisson statistical model with the different
distribution feature of signal and noise in the time axis. Due to selecting a
proper threshold, our method can effectively filter out the false alarm of
system and use the ToFs of detected signal photons to rebuild the depth image
of the scene. The experimental results reveal that by our method it can fast
distinguish the distance between two close objects, which is confused due to
the high background noise, and acquire the accurate depth image of the scene.
Our method need not increase the complexity of the system and is useful in
powerlimited depth imaging.

The liquid scintillator (LS) has been widely utilized in the past, running
and future neutrino experiments, and requirement to the LS radiopurity is
higher and higher. The water extraction is a powerful method to remove soluble
radioactive nuclei, and a miniextraction station has been constructed. To
evaluate the extraction efficiency and optimize the operation parameters, a
setup to load radioactivity to LS and a laboratory scale setup to measure
radioactivity which use Bi^{212}Po^{212}Pb^{208} cascade decay are developed.
Experiences from laboratory study will be useful to large scale water
extraction plants design and the optimization of working in future.

The Jiangmen Underground Neutrino Observatory (JUNO), a 20 kton multipurpose
underground liquid scintillator detector, was proposed with the determination
of the neutrino mass hierarchy as a primary physics goal. It is also capable of
observing neutrinos from terrestrial and extraterrestrial sources, including
supernova burst neutrinos, diffuse supernova neutrino background, geoneutrinos,
atmospheric neutrinos, solar neutrinos, as well as exotic searches such as
nucleon decays, dark matter, sterile neutrinos, etc. We present the physics
motivations and the anticipated performance of the JUNO detector for various
proposed measurements. By detecting reactor antineutrinos from two power plants
at 53km distance, JUNO will determine the neutrino mass hierarchy at a 34
sigma significance with six years of running. The measurement of antineutrino
spectrum will also lead to the precise determination of three out of the six
oscillation parameters to an accuracy of better than 1\%. Neutrino burst from a
typical corecollapse supernova at 10 kpc would lead to ~5000
inversebetadecay events and ~2000 allflavor neutrinoproton elastic
scattering events in JUNO. Detection of DSNB would provide valuable information
on the cosmic starformation rate and the average corecollapsed neutrino
energy spectrum. Geoneutrinos can be detected in JUNO with a rate of ~400
events per year, significantly improving the statistics of existing geoneutrino
samples. The JUNO detector is sensitive to several exotic searches, e.g. proton
decay via the $p\to K^++\bar\nu$ decay channel. The JUNO detector will provide
a unique facility to address many outstanding crucial questions in particle and
astrophysics. It holds the great potential for further advancing our quest to
understanding the fundamental properties of neutrinos, one of the building
blocks of our Universe.

Liquid scintillator (LS) will be adopted as the detector material in JUNO
(Jiangmen Underground Neutrino Observatory). The energy resolution requirement
of JUNO is 3%, which has never previously been reached. To achieve this energy
resolution, the light yield of liquid scintillator is an important factor. PPO
(the fluor) and bisMSB (the wavelength shifter) are the two main materials
dissolved in LAB. To study the influence of these two materials on the
transmission of scintillation photons in LS, 25 and 12 cmlong quartz vessels
were used in a light yield experiment. LS samples with different concentration
of PPO and bisMSB were tested. At these lengths, the light yield growth is not
obvious when the concentration of PPO is higher than 4 g/L. The influence from
bisMSB becomes insignificant when its concentration is higher than 8 mg/L.
This result could provide some useful suggestions for the JUNO LS.

The theory of traveling waves and spreading speeds is developed for
timespace periodic monotone semiflows with monostable structure. By using
traveling waves of the associated Poincar\'e maps in a strong sense, we
establish the existence of timespace periodic traveling waves and spreading
speeds. We then apply these abstract results to a two species competition
reactionadvectiondiffusion model. It turns out that the minimal wave speed
exists and coincides with the single spreading speed for such a system no
matter whether the spreading speed is linearly determinate. We also obtain a
set of sufficient conditions for the spreading speed to be linearly
determinate.

Highpurity germanium detectors are well suited to analysis the radioactivity
of samples. In order to reduce the environmental background, lowactivity lead
and oxygen free copper are installed outside of the probe to shield gammas,
outmost is a plastic scintillator to veto the cosmic rays, and an antiCompton
detector can improve the PeaktoCompton ratio. Using the GEANT4 tools and
taking into account a detailed description of the detector, we optimize the
sizes of the detectors to reach the design indexes. A group of experimental
data from a HPGe spectrometer in using were used to compare with the
simulation. As to new HPGe Detector simulation, considering the different
thickness of BGO crystals and anticoincidence efficiency, the simulation
results show that the optimal thickness is 5.5cm, and the PeaktoCompton ratio
of 40K is raised to 1000 when the anticoincidence efficiency is 0.85. As the
background simulation, 15 cm oxygenfree copper plus 10 cm lead can reduce the
environmental gamma rays to 0.0024 cps/100 cm3 Ge (50keV~2.8MeV), which is
about 105 of environmental background.

Regularization is a well recognized powerful strategy to improve the
performance of a learning machine and $l^q$ regularization schemes with
$0<q<\infty$ are central in use. It is known that different $q$ leads to
different properties of the deduced estimators, say, $l^2$ regularization leads
to smooth estimators while $l^1$ regularization leads to sparse estimators.
Then, how does the generalization capabilities of $l^q$ regularization learning
vary with $q$? In this paper, we study this problem in the framework of
statistical learning theory and show that implementing $l^q$ coefficient
regularization schemes in the sample dependent hypothesis space associated with
Gaussian kernel can attain the same almost optimal learning rates for all
$0<q<\infty$. That is, the upper and lower bounds of learning rates for $l^q$
regularization learning are asymptotically identical for all $0<q<\infty$. Our
finding tentatively reveals that, in some modeling contexts, the choice of $q$
might not have a strong impact with respect to the generalization capability.
From this perspective, $q$ can be arbitrarily specified, or specified merely by
other no generalization criteria like smoothness, computational complexity,
sparsity, etc..

We consider the approximation capability of orthogonal super greedy
algorithms (OSGA) and its applications in supervised learning. OSGA is
concerned with selecting more than one atoms in each iteration step, which, of
course, greatly reduces the computational burden when compared with the
conventional orthogonal greedy algorithm (OGA). We prove that even for function
classes that are not the convex hull of the dictionary, OSGA does not degrade
the approximation capability of OGA provided the dictionary is incoherent.
Based on this, we deduce a tight generalization error bound for OSGA learning.
Our results show that in the realm of supervised learning, OSGA provides a
possibility to further reduce the computational burden of OGA in the premise of
maintaining its prominent generalization capability.

Stainless steel is the material used for the storage vessels and piping
systems of LABbased liquid scintillator in JUNO experiment. Aging is
recognized as one of the main degradation mechanisms affecting the properties
of liquid scintillator. LABbased liquid scintillator aging experiments were
carried out in different material of containers (type 316 and 304 stainless
steel and glass) at two different temperature (40 and 25 degrees Celsius). For
the continuous liquid scintillator properties tests, the light yield and the
absorption spectrum are nearly the same as that of the unaged one. The
attenuation length of the aged samples is 6%~12% shorter than that of the
unaged one. But the concentration of element Fe in the LABbased liquid
scintillator does not show a clear change. So the self aging has small effect
on liquid scintillator, as well as the stainless steel impurity quenching. Type
316 and 304 stainless steel can be used as LABbased liquid scintillator
vessel, transportation pipeline material.

An extreme learning machine (ELM) can be regarded as a two stage feedforward
neural network (FNN) learning system which randomly assigns the connections
with and within hidden neurons in the first stage and tunes the connections
with output neurons in the second stage. Therefore, ELM training is essentially
a linear learning problem, which significantly reduces the computational
burden. Numerous applications show that such a computation burden reduction
does not degrade the generalization capability. It has, however, been open that
whether this is true in theory. The aim of our work is to study the theoretical
feasibility of ELM by analyzing the pros and cons of ELM. In the previous part
on this topic, we pointed out that via appropriate selection of the activation
function, ELM does not degrade the generalization capability in the expectation
sense. In this paper, we launch the study in a different direction and show
that the randomness of ELM also leads to certain negative consequences. On one
hand, we find that the randomness causes an additional uncertainty problem of
ELM, both in approximation and learning. On the other hand, we theoretically
justify that there also exists an activation function such that the
corresponding ELM degrades the generalization capability. In particular, we
prove that the generalization capability of ELM with Gaussian kernel is
essentially worse than that of FNN with Gaussian kernel. To facilitate the use
of ELM, we also provide a remedy to such a degradation. We find that the
welldeveloped coefficient regularization technique can essentially improve the
generalization capability. The obtained results reveal the essential
characteristic of ELM and give theoretical guidance concerning how to use ELM.

Multilook processing is a widely used speckle reduction approach in synthetic
aperture radar (SAR) imaging. Conventionally, it is achieved by incoherently
summing of some independent lowresolution images formulated from overlapping
subbands of the SAR signal. However, in the context of compressive sensing (CS)
SAR imaging, where the samples are collected at subNyquist rate, the data
spectrum is highly aliased that hinders the direct application of the existing
multilook techniques. In this letter, we propose a new CSSAR imaging method
that can realize multilook processing simultaneously during image
reconstruction. The main idea is to replace the SAR observation matrix by the
inverse of multilook procedures, which is then combined with random sampling
matrix to yield a multilook CSSAR observation model. Then a joint sparse
regularization model, considering pixel dependency of subimages, is derived to
form multilook images. The suggested SAR imaging method can not only
reconstruct sparse scene efficiently below Nyquist rate, but is also able to
achieve a comparable reduction of speckles during reconstruction. Simulation
results are finally provided to demonstrate the effectiveness of the proposed
method.

We propose a novel scheme for continuous variable quantum key
distribution(CVQKD) using the subcarrier multiplexing technique which was
employed in microwave photonics. This scheme allows to distribute N channels
independent Gaussian modulated CVQKD in parallel with one laser source and
several phase modulators. We analyze the influence of nonlinear signal mixing
and the security in the asymptotic limit. Results indicate that by using this
multiplexing technique, each channel will be introduced a nonGaussian extra
source noise, resulting slightly short of the maximum transmission distance,
while the total secret key rate can be considerably increased. This scheme
could also be used for key distribution for multiusers and combined with the
WDM devices it has the potential to construct a CVQKD network.

$l^q$regularization has been demonstrated to be an attractive technique in
machine learning and statistical modeling. It attempts to improve the
generalization (prediction) capability of a machine (model) through
appropriately shrinking its coefficients. The shape of a $l^q$ estimator
differs in varying choices of the regularization order $q$. In particular,
$l^1$ leads to the LASSO estimate, while $l^{2}$ corresponds to the smooth
ridge regression. This makes the order $q$ a potential tuning parameter in
applications. To facilitate the use of $l^{q}$regularization, we intend to
seek for a modeling strategy where an elaborative selection on $q$ is
avoidable. In this spirit, we place our investigation within a general
framework of $l^{q}$regularized kernel learning under a sample dependent
hypothesis space (SDHS). For a designated class of kernel functions, we show
that all $l^{q}$ estimators for $0< q < \infty$ attain similar generalization
error bounds. These estimated bounds are almost optimal in the sense that up to
a logarithmic factor, the upper and lower bounds are asymptotically identical.
This finding tentatively reveals that, in some modeling contexts, the choice of
$q$ might not have a strong impact in terms of the generalization capability.
From this perspective, $q$ can be arbitrarily specified, or specified merely by
other no generalization criteria like smoothness, computational complexity,
sparsity, etc..

In recent years, compressed sensing (CS) has been applied in the field of
synthetic aperture radar (SAR) imaging and shows great potential. The existing
models are, however, based on application of the sensing matrix acquired by the
exact observation functions. As a result, the corresponding reconstruction
algorithms are much more time consuming than traditional matched filter (MF)
based focusing methods, especially in high resolution and wide swath systems.
In this paper, we formulate a new CSSAR imaging model based on the use of the
approximated SAR observation deducted from the inverse of focusing procedures.
We incorporate CS and MF within an sparse regularization framework that is then
solved by a fast iterative thresholding algorithm. The proposed model forms a
new CSSAR imaging method that can be applied to highquality and
highresolution imaging under subNyquist rate sampling, while saving the
computational cost substantially both in time and memory. Simulations and real
SAR data applications support that the proposed method can perform SAR imaging
effectively and efficiently under Nyquist rate, especially for large scale
applications.

The gas gain and energy resolution of single and double THGEM detectors
(5{\times}5cm2 effective area) with minirims (rim is less than 10{\mu}m) were
studied. The maximum gain can reach 5{\times}103 and 2{\times}105 for single
and double THGEM respectively, while the energy resolution of 5.9 keV Xray
varied from 18% to 28% for both single and double THGEM detectors of different
hole sizes and thicknesses.All the experiments were investigated in mixture of
noble gases(argon,neon) and small content of other gases(isobutane,methane) at
atmospheric pressure.

The responds of different common alkali halide crystals to alpharays and
gammarays are tested in our research. It is found that only CsI(Na) crystals
have significantly different waveforms between alpha and gamma scintillations,
while others have not this phenomena. It is suggested that the fast light of
CsI(Na) crystals arises from the recombination of free electrons with
selftrapped holes of the host crystal CsI. Selfabsorption limits the emission
of fast light of CsI(Tl) and NaI(Tl) crystals.

This paper is devoted to the study of traveling waves for monotone evolution
systems of bistable type. Under an abstract setting, we establish the existence
of bistable traveling waves for discrete and continuoustime monotone
semiflows. This result is then extended to the cases of periodic habitat and
weak compactness, respectively. We also apply the developed theory to four
classes of evolution systems.

The luminescent properties of CsI(Na) crystals are studied in this report. By
using a TDS3054C oscilloscope with a sampling frequency of 5 GS/s, we find out
that nuclear recoil signals are dominated by very fast light pulse with a decay
time of ~20 ns, while {\gamma}ray signals have a decay time of ~600 ns. The
wavelength of nuclear recoil and {\gamma}ray signals are also different. The
study of n/{\gamma} separation shows that the rejection factor can reach an
order of 107 with signal efficiency more than 80% at an equivalent electron
recoil energy of 20 keV or more. Such a property makes CsI(Na) an ideal
candidate for dark matter searches.