• The first hygroscopic tunable cloth actuator is realized via modification of commercial cloth template by a 3D nanoporous polymer hybrid. The nanoporous hybrid guarantees fast water diffusion and amplifies deformation. The cloth actuator achieves a large-scale size production, tunable motion, high tensile strength and mechanical flexibility with a breadth of utilities (e.g., electric generator and smart materials).
  • Porous and flexible actuating materials are important in the development of smart systems. We report here a facile method to prepare scalable, flexible actuating porous membranes based on a poly(ionic liquid)-modified tissue paper. The targeted membrane property profile was based on a synergy of a gradient porous structure of poly(ionic liquid) network and the flexibility of tissue paper. The gradient porous structure was built up through ammonia-triggered electrostatic complexation of a poly(ionic liquid) with poly(acrylic acid) (PAA) that were previously impregnated inside the tissue paper. As a result, these porous membranes undergo bending deformation in response to organic solvents in vapor or liquid phase and can recover their shape back in air, which was demonstrated to be able to serve as solvent sensors. Besides, they show enhanced mechanical properties due to the introduction of mechanically flexible tissue paper that allows the membranes to be designed as new responsive textiles and contractile actuators.
  • Self-supported electrocatalysts being generated and employed directly as electrode for energy conversion has been intensively pursued in the fields of materials chemistry and energy. Herein, we report a synthetic strategy to prepare freestanding hierarchically structured, nitrogen-doped nanoporous graphitic carbon membranes functionalized with Janus-type Co/CoP nanocrystals (termed as HNDCM-Co/CoP), which were successfully applied as a highly-efficient, binder-free electrode in hydrogen evolution reaction (HER). Benefited from multiple structural merits, such as high degree of graphitization, three-dimensionally interconnected micro-/meso-/macropores, uniform nitrogen-doping, well-dispersed Co/CoP nanocrystals as well as the confinement effect of the thin carbon layer on the nanocrystals, HNDCM-Co/CoP exhibited superior electrocatalytic activity and long-term operation stability for HER under both acid and alkaline conditions. As a proof-of-concept of practical usage, a macroscopic piece of HNDCM-Co/CoP of 5.6 cm x 4 cm x 60 um in size was prepared in our laboratory. Driven by a solar cell, electroreduction of water in alkaline condition (pH 14) was performed, and H2 has been produced at a rate of 16 ml/min, demonstrating its potential as real-life energy conversion systems.
  • To extend fossil oil supplies, sustainable feed stocks for the production of useful reagents and polymers should be harnessed. In this regard, chemicals derived from plants are excellent candidates. While the vast majority of plant sources used for polymer science only contain CxHyOz, alkaloids such as caffeine, nicotine, and theophylline possess nitrogen functionality that can provide new functions for bio-derived polymers and their synthesis. In this context, we exploited the chemistry of theophylline, a natural product found in chocolate and tea, to create a cationic poly(theophylline) in a straightforward fashion for the first time. We demonstrate how this new polymer can be synthesized and used for the creation of narrowly disperse cationic microspheres.
  • This paper reports on the one-pot synthesis of main-chain imidazolium-containing polymers, some of which show unusually high thermal stability. The imidazolium polymers were obtained by modified Debus-Radziszewski reactions for the chain build-up from simple organic compounds, here pyruvaldehyde, formaldehyde, acetic acid, and a variety of diamines. The reactions were performed in aqueous media at ambient conditions, being synthetically elegant, convenient and highly efficient. Finally, a simple anion-metathesis reaction was conducted to replace the acetate anion with dicyanamide, and the thermal properties of the main-chain polyimidazoliums before and after anion exchange were studied in detail, which demonstrated chain cross-linking by the counterion and a coupled unusually high carbonization yield of up to 66 wt% at 900 oC.
  • Imidazolium based porous cationic polymers were synthesized using an innovative and facile approach, which takes advantage of the Debus Radziszewski reaction to obtain meso- and microporous polymers following click chemistry principles. In the obtained set of materials, click based porous cationic polymers have the same cationic backbone, whereas they bear the commonly used anions of imidazolium poly(ionic liquid)s. These materials show hierarchical porosity and a good specific surface area. Furthermore, their chemical structure was extensively characterized using ATR FTIR and SS NMR spectroscopies, and HR MS. These polymers show good performance towards carbon dioxide sorption, especially those possessing the acetate anion. This polymer has an uptake of 2 mmol per g of CO2 at 1 bar and 273 K, a value which is among the highest recorded for imidazolium poly(ionic liquid)s. These polymers were also modified in order to introduce N-heterocyclic carbenes along the backbone. Carbon dioxide loading in the carbene-containing polymer is in the same range as that of the non-modified versions, but the nature of the interaction is substantially different. The combined use of in situ FTIR spectroscopy and microcalorimetry evidenced a chemisorption phenomenon that brings about the formation of an imidazolium carboxylate zwitterion.
  • Porous poly(ionic liquid) membranes that were prepared via electrostatic cross-linking were subsequently covalently cross-linked via formation of a 1,3,5-triazine network. The additional covalent cross-links do not affect the pore size and pore size distribution of the membranes and stabilize them towards salt solutions of high ionic strength, enabling the membranes to work in a broader environmental window.
  • Nanoporous graphitic carbon membranes with defined chemical composition and pore architecture are novel nanomaterials that are actively pursued. Compared to easy-to-make porous carbon powders that dominate the porous carbon research and applications in energy generation/conversion and environmental remediation, porous carbon membranes are synthetically more challenging though rather appealing from an application perspective due to their structural integrity, interconnectivity and purity. Here we report a simple bottom-up approach to fabricate large-size, freestanding, porous carbon membranes that feature an unusual single-crystal-like graphitic order and hierarchical pore architecture plus favorable nitrogen doping. When loaded with cobalt nanoparticles, such carbon membranes serve as high-performance carbon-based non-noble metal electrocatalyst for overall water splitting.
  • The past decade has witnessed the rapid progress in synthesizing nanoporous organic networks or polymer frameworks for various potential applications. Generally speaking, functionalization of porous networks to add extra properties and enhance materials performance could be achieved either during the pore formation (thus a concurrent approach) or post-synthetic modification (a sequential approach). Nanoporous organic networks which include ion pairs in a covalent manner are of special importance and possess extreme application profiles. Within these nanoporous ionic organic networks (NIONs), here with a pore size in the range from sub-1 nm to 100 nm, we observe a synergistic coupling of the electrostatic interaction of charges, the nanoconfinement within pores and the addressable functional units in soft matter resulting in a wide variety of functions and applications, above all catalysis, energy storage and conversion, as well as environmental operations. This review aims to highlight the recent progress in this area, and seeks to raise original perspectives that will stimulate future advancements at both the fundamental and applied level.
  • A composite porous polymer membrane with aligned CNTs in its matrix is developed which exhibits programmable, anisotropic actuation towards organic vapors. The alignment of CNTs in multiple directions and the gradient porous structure of the membrane are critical for the actuation, and the actuating direction can be well controlled at a direction perpendicular to the longitudinal orientation of CNTs. The reversible actuation may be repeated for 300 cycles without obvious fatigue. These polymer composites are promising building blocks for a wide variety of applications such as sensors and actuators. The concept of programmable actuation succeeded here in a porous polymer mateial via complex orientation of CNTs reflects a new high level of control over physical motions that is applicable to a broad range of soft actuators.
  • A commercially available membrane filter paper composed of mixed cellulose esters bearing typically an interconnected pore structure was transformed into a stimuli-responsive bilayer actuator by depositing a thin film of poly(ionic liquid)-modified graphene oxide sheets (GO-PIL) onto the filter paper. In acetone vapor, the as-synthesized bilayer actuator bent readily into multiple loops at a fast speed with the GO-PIL top film inwards. Upon pulling back into air the actuator recovered their original shape. The asymmetric swelling of the top GO-PIL film and the bottom porous filter paper towards organic vapor offers a favorably synergetic function to drive the actuation. The PIL polymer chains in the hybrid film were proven crucial to enhance the adhesion strength between the GO sheets and the adjacent filter paper to avoid interfacial delamination and thus improve force transfer. The overall construction allows a prolonged lifetime of the bilayer actuator under constant operation, especially when compared to that of the GO/filter paper bilayer actuator without PIL.
  • We introduced a new concept for fabricating solvent stimulus polymer actuators with unprecedented sensitivity and accuracy. This was accomplished by integrating porous architectures and electrostatic complexation gradients in a poly(ionic liquid) membrane that bears ionic liquid species for solvent sorption. In contact with 1.5 mol% of acetone molecules in water, the actuator membrane (1 mm x 20 mm x 30 um) bent into a closed loop. While the interaction between solvents and the polymer drives the actuation, the continuous gradient in complexation degree combined with the porous architecture optimizes the actuation, giving it a high sensitivity and even the ability to discriminate butanol solvent isomers. The membrane is also capable of cooperative actuation. The design concept is easy to implement and applicable to other polyelectrolyte systems, which substantially underpins their potentials in smart and sensitive signaling microrobotics/devices.
  • The interest in poly(ionic liquids) for sensing applications are derived from their strong interactions to a variety of analytes. By combining the desirable mechanical properties of polymers with the physical and chemical properties of ILs, new materials can be created. The tunable nature of both ionic liquids and polymers allows for incredible diversity, which is exemplified in their broad applicability. In this article we examine the new field of poly(ionic liquid) sensors by providing a detailed look at the current state-of-the-art sensing devices for solvents, gasses, biomolecules, pH, and anions.
  • Porous polymer membranes via electrostatic complexation triggered by neutralization are fabricated for the first time from a water-soluble poly(ionic liquid) (PIL). The porous structure is formed as a consequence of simultaneous phase separation of the PIL and ionic complexation, which occurred in a basic solution of a non-solvent for the PIL. These membranes have a stimuli-responsive porosity, with open and closed pores in isopropanol and in water, respectively. This property is quantitatively demonstrated in filtration experiments, where water is passing much slower through the membranes than isopropanol.
  • Herein we report the synthesis of a series of poly(4-alkyl-1-vinyl-1,2,4-triazolium) poly(ionic liquid)s either via straightforward free radical polymerization of their corresponding ionic liquid monomers, or via anion metathesis of the polymer precursors bearing halide as counter anion. The ionic liquid monomers were first prepared via N-alkylation reaction of commercially available 1-vinyl-1,2,4-triazole with alkyl iodides, followed by anion metathesis with targeted fluorinated anions. The thermal properties and solubilities of these poly(ionic liquid)s have been systematically investigated. Interestingly, it was found that the poly(4-ethyl-1-vinyl-1,2,4-triazolium) poly(ionic liquid) exhibited an improved loading capacity of transition metal ions in comparison with its imidazolium counterpart.
  • The dependence of the lower critical solution temperature (LCST) of charged, thermosensitive copolymers on their charge fraction and the salt concentration is investigated by employing systematic cloud-point experiments and analytical theory. The latter is based on the concept of the Donnan equilibrium incorporated into a thermodynamic expansion of a two-state free energy around a charge-neutral reference homopolymer and should be applicable for weakly charged (or highly salted) polymer systems. Very good agreement is found between the theoretical description and the experiments for aqueous solutions of the responsive copolymer poly(NIPAM-co-EVImBr) for a wide range of salt concentrations and charge fractions up to 8%, using only two global, physical fitting parameters.