• In order to handle extremely-high stored energy in future proton-proton colliders, an extremely high-efficiency collimation system is required for safe operation. At LHC, the major limiting locations in terms of particle losses on superconducting (SC) magnets are the dispersion suppressors (DS) downstream of the transverse collimation insertion. These losses are due to the protons experiencing single diffractive interactions in the primary collimators. How to solve this problem is very important for future proton-proton colliders, such as the FCC-hh and SPPC. In this article, a novel method is proposed, which arranges both the transverse and momentum collimation in the same long straight section. In this way, the momentum collimation system can clean those particles related to the single diffractive effect. The effectiveness of the method has been confirmed by multi-particle simulations. In addition, SC quadrupoles with special designs such as enlarged aperture and good shielding are adopted to enhance the phase advance in the transverse collimation section, so that tertiary collimators can be arranged to clean off the tertiary halo which emerges from the secondary collimators and improve the collimation efficiency. With one more collimation stage in the transverse collimation, the beam losses in both the momentum collimation section and the experimental regions can be largely reduced. Multi-particle simulation results with the MERLIN code confirm the effectiveness of the collimation method. At last, we provide a protection scheme of the SC magnets in the collimation section. The FLUKA simulations show that by adding some special protective collimators in front of the magnets, the maximum power deposition in the SC coils is reduced dramatically, which is proven to be valid for protecting the SC magnets from quenching.
  • The white neutron beamline at the China Spallation Neutron Source will be used mainly for nuclear data measurements. It will be characterized by high flux and broad energy spectra. To exploit the beamline as a neutron imaging source, we propose a liquid scintillator fiber array for fast neutron resonance radiography. The fiber detector unit has a small exposed area, which will limit the event counts and separate the events in time, thus satisfying the requirements for single-event time-of-flight (SEToF) measurement. The current study addresses the physical design criteria for ToF measurement, including flux estimation and detector response. Future development and potential application of the technology are also discussed.
  • This paper proposes a novel method for resonant slow extraction in synchrotrons by using special anti-symmetric sextupole fields, which can be produced by a special magnet structure. The method has the potential in applications demanding for very stable slow extraction from synchrotrons. Our studies show that the slow extraction at the half-integer resonance by using anti-symmetric sextupole field has some advantages compared to the normal sextupole field, and the latter is widely used in the slow extraction method. One of them is that it can work at a more distant tune from the resonance, so that it can reduce significantly the intensity variation of the extracted beam which is mainly caused by the ripples of magnet power supplies. The studies by both the Hamiltonian theory and numerical simulations show that the stable region at the proximity of the half-integer resonance by anti-symmetric sextupole field is much smaller and flatter than the one by standard sextupole field at the third-order resonance. By gradually increasing the field strength, the beam can be extracted with intensity more homogeneous than by the usual third-order resonant method, in the means of both smaller intensity variation and spike in the beginning spill. Similar to the case with a normal sextupole, we derive an empirical formula for the area of the stable region with an anti-symmetric sextupole. One can find that with the same field strength and the same tune distance to the resonance, the area of stable region or the change of the area due to the working point variation in the case of anti-symmetric sextupole is about 1/14 of the one in the case of standard sextupole. The detailed studies including beam dynamic behaviors at the proximity of other resonances, influence of 2-D field error, half-integer stop-band, and resonant slow extraction by using quadrupole field have also been presented.
  • Following the discovery of the Higgs boson at LHC, new large colliders are being studied by the international high-energy community to explore Higgs physics in detail and new physics beyond the Standard Model. In China, a two-stage circular collider project CEPC-SPPC is proposed, with the first stage CEPC (Circular Electron Positron Collier, a so-called Higgs factory) focused on Higgs physics, and the second stage SPPC (Super Proton-Proton Collider) focused on new physics beyond the Standard Model. This paper discusses this second stage.
  • In a long-term planning for neutrino experiments in China, a medium baseline neutrino beam is proposed which uses a CW superconducting linac of 15 MW in beam power as the proton driver. The linac will be based on the technologies which are under development by the China-ADS project, but with much weaker requirement on reliability. It is composed of a 3.2-MeV normal conducting RFQ and 5 different types of superconducting cavities. The nominal design energy and current are 1.5 GeV and 10 mA, respectively. The general considerations and preliminary results on the physics design will be presented here. In addition, the alternative designs such as 2.0 GeV and 2.5 GeV as they may be required by the general design can be easily extended from the nominal one.
  • The injector (Scheme-I) of the C-ADS linac is a 10-mA 10-MeV proton linac working in CW mode. It is mainly comprised of a 3.2-MeV room-temperature 4-vane RFQ and twelve superconducting single-spoke cavities housed in a long cryostat. Error analysis including alignment and field errors, static and dynamic ones for the injector are presented. Based on detailed numerical simulations, an orbit correction scheme has been designed. It shows that with correction the rms residual orbit errors can be controlled within 0.3 mm and a beam loss rate of 1.7*10^-6 is obtained. To reduce the beam loss rate further, an improved lattice design for the superconducting spoke cavity section has been studied.
  • A post-acceleration system based on the accelerators at CSNS (China Spallation Neutron Source) is proposed to build a super-beam facility for neutrino physics. Two post-acceleration schemes, one using superconducting dipole magnets in the main ring and the other using room-temperature magnets have been studied, both to achieve the final proton energy of 128 GeV and the beam power of 4 MW by taking 10% of the CSNS beam from the neutron source. The main design features and the comparison for the two schemes are presented. The CSNS super-beam facility will be very competitive in long-baseline neutrino physics studies, compared with other super-beam facilities proposed in the world.
  • The spatial and energy distribution of spallation neutrons have an effect on the performance of Accelerator Driven Subcritical systems. In this work, the spatial, energy distribution of spallation neutrons and the effect of these factors on proton efficiency was studied. When the radius of spallation region increases, backward neutrons were found to have a rather big ratio and have a positive effect on proton efficiency. By making better use of these neutrons, we may increase the radius of target to satisfy some other requirements in the design of subcritical core.