We present the Kepler Object of Interest (KOI) catalog of transiting exoplanets based on searching four years of Kepler time series photometry (Data Release 25, Q1-Q17). The catalog contains 8054 KOIs of which 4034 are planet candidates with periods between 0.25 and 632 days. Of these candidates, 219 are new and include two in multi-planet systems (KOI-82.06 and KOI-2926.05), and ten high-reliability, terrestrial-size, habitable zone candidates. This catalog was created using a tool called the Robovetter which automatically vets the DR25 Threshold Crossing Events (TCEs, Twicken et al. 2016). The Robovetter also vetted simulated data sets and measured how well it was able to separate TCEs caused by noise from those caused by low signal-to-noise transits. We discusses the Robovetter and the metrics it uses to sort TCEs. For orbital periods less than 100 days the Robovetter completeness (the fraction of simulated transits that are determined to be planet candidates) across all observed stars is greater than 85%. For the same period range, the catalog reliability (the fraction of candidates that are not due to instrumental or stellar noise) is greater than 98%. However, for low signal-to-noise candidates between 200 and 500 days around FGK dwarf stars, the Robovetter is 76.7% complete and the catalog is 50.5% reliable. The KOI catalog, the transit fits and all of the simulated data used to characterize this catalog are available at the NASA Exoplanet Archive.

With each new version of the Kepler pipeline and resulting planet candidate catalogue, an updated measurement of the underlying planet population can only be recovered with an corresponding measurement of the Kepler pipeline detection efficiency. Here, we present measurements of the sensitivity of the pipeline (version 9.2) used to generate the Q1-Q17 DR24 planet candidate catalog (Coughlin et al. 2016). We measure this by injecting simulated transiting planets into the pixel-level data of 159,013 targets across the entire Kepler focal plane, and examining the recovery rate. Unlike previous versions of the Kepler pipeline, we find a strong period dependence in the measured detection efficiency, with longer (>40 day) periods having a significantly lower detectability than shorter periods, introduced in part by an incorrectly implemented veto. Consequently, the sensitivity of the 9.2 pipeline cannot be cast as a simple one-dimensional function of the signal strength of the candidate planet signal as was possible for previous versions of the pipeline. We report on the implications for occurrence rate calculations based on the Q1-Q17 DR24 planet candidate catalog and offer important caveats and recommendations for performing such calculations. As before, we make available the entire table of injected planet parameters and whether they were recovered by the pipeline, enabling readers to derive the pipeline detection sensitivity in the planet and/or stellar parameter space of their choice.

Given that low-mass stars have intrinsically low luminosities at optical wavelengths and a propensity for stellar activity, it is advantageous for radial velocity (RV) surveys of these objects to use near-infrared (NIR) wavelengths. In this work we describe and test a novel RV extraction pipeline dedicated to retrieving RVs from low mass stars using NIR spectra taken by the CSHELL spectrograph at the NASA Infrared Telescope Facility, where a methane isotopologue gas cell is used for wavelength calibration. The pipeline minimizes the residuals between the observations and a spectral model composed of templates for the target star, the gas cell, and atmospheric telluric absorption; models of the line spread function, continuum curvature, and sinusoidal fringing; and a parameterization of the wavelength solution. The stellar template is derived iteratively from the science observations themselves without a need for separate observations dedicated to retrieving it. Despite limitations from CSHELL's narrow wavelength range and instrumental systematics, we are able to (1) obtain an RV precision of 35 m/s for the RV standard star GJ 15 A over a time baseline of 817 days, reaching the photon noise limit for our attained SNR, (2) achieve ~3 m/s RV precision for the M giant SV Peg over a baseline of several days and confirm its long-term RV trend due to stellar pulsations, as well as obtain nightly noise floors of ~2 - 6 m/s, and (3) show that our data are consistent with the known masses, periods, and orbital eccentricities of the two most massive planets orbiting GJ 876. Future applications of our pipeline to RV surveys using the next generation of NIR spectrographs, such as iSHELL, will enable the potential detection of Super-Earths and Mini-Neptunes in the habitable zones of M dwarfs.

We present the results of a precise near-infrared (NIR) radial velocity (RV) survey of 32 low-mass stars with spectral types K2-M4 using CSHELL at the NASA IRTF in the $K$-band with an isotopologue methane gas cell to achieve wavelength calibration and a novel iterative RV extraction method. We surveyed 14 members of young ($\approx$ 25-150 Myr) moving groups, the young field star $\varepsilon$ Eridani as well as 18 nearby ($<$ 25 pc) low-mass stars and achieved typical single-measurement precisions of 8-15 m s$^{-1}$ with a long-term stability of 15-50 m s$^{-1}$. We obtain the best NIR RV constraints to date on 27 targets in our sample, 19 of which were never followed by high-precision RV surveys. Our results indicate that very active stars can display long-term RV variations as low as $\sim$ 25-50 m s$^{-1}$ at $\approx$ 2.3125 $\mu$m, thus constraining the effect of jitter at these wavelengths. We provide the first multi-wavelength confirmation of GJ 876 bc and independently retrieve orbital parameters consistent with previous studies. We recovered RV variability for HD 160934 AB and GJ 725 AB that are consistent with their known binary orbits, and nine other targets are candidate RV variables with a statistical significance of 3-5$\sigma$. Our method combined with the new iSHELL spectrograph will yield long-term RV precisions of $\lesssim$ 5 m s$^{-1}$ in the NIR, which will allow the detection of Super-Earths near the habitable zone of mid-M dwarfs.

We present the seventh Kepler planet candidate catalog, which is the first to be based on the entire, uniformly processed, 48 month Kepler dataset. This is the first fully automated catalog, employing robotic vetting procedures to uniformly evaluate every periodic signal detected by the Q1-Q17 Data Release 24 (DR24) Kepler pipeline. While we prioritize uniform vetting over the absolute correctness of individual objects, we find that our robotic vetting is overall comparable to, and in most cases is superior to, the human vetting procedures employed by past catalogs. This catalog is the first to utilize artificial transit injection to evaluate the performance of our vetting procedures and quantify potential biases, which are essential for accurate computation of planetary occurrence rates. With respect to the cumulative Kepler Object of Interest (KOI) catalog, we designate 1,478 new KOIs, of which 402 are dispositioned as planet candidates (PCs). Also, 237 KOIs dispositioned as false positives (FPs) in previous Kepler catalogs have their disposition changed to PC and 118 PCs have their disposition changed to FP. This brings the total number of known KOIs to 8,826 and PCs to 4,696. We compare the Q1-Q17 DR24 KOI catalog to previous KOI catalogs, as well as ancillary Kepler catalogs, finding good agreement between them. We highlight new PCs that are both potentially rocky and potentially in the habitable zone of their host stars, many of which orbit solar-type stars. This work represents significant progress in accurately determining the fraction of Earth-size planets in the habitable zone of Sun-like stars. The full catalog is publicly available at the NASA Exoplanet Archive.

We measure planet occurrence rates using the planet candidates discovered by the Q1-Q16 Kepler pipeline search. This study examines planet occurrence rates for the Kepler GK dwarf target sample for planet radii, 0.75<Rp<2.5 Rearth, and orbital periods, 50<Porb<300 days, with an emphasis on a thorough exploration and identification of the most important sources of systematic uncertainties. Integrating over this parameter space, we measure an occurrence rate of F=0.77 planets per star, with an allowed range of 0.3<F<1.9. The allowed range takes into account both statistical and systematic uncertainties, and values of F beyond the allowed range are significantly in disagreement with our analysis. We generally find higher planet occurrence rates and a steeper increase in planet occurrence rates towards small planets than previous studies of the Kepler GK dwarf sample. Through extrapolation, we find that the one year orbital period terrestrial planet occurrence rate, zeta_1=0.1, with an allowed range of 0.01<zeta_1<2, where zeta_1 is defined as the number of planets per star within 20% of the Rp and Porb of Earth. For G dwarf hosts, the zeta_1 parameter space is a subset of the larger eta_earth parameter space, thus zeta_1 places a lower limit on eta_earth for G dwarf hosts. From our analysis, we identify the leading sources of systematics impacting Kepler occurrence rate determinations as: reliability of the planet candidate sample, planet radii, pipeline completeness, and stellar parameters.

In the first three years of operation the Kepler mission found 3,697 planet candidates from a set of 18,406 transit-like features detected on over 200,000 distinct stars. Vetting candidate signals manually by inspecting light curves and other diagnostic information is a labor intensive effort. Additionally, this classification methodology does not yield any information about the quality of planet candidates; all candidates are as credible as any other candidate. The torrent of exoplanet discoveries will continue after Kepler as there will be a number of exoplanet surveys that have an even broader search area. This paper presents the application of machine-learning techniques to the classification of exoplanet transit-like signals present in the \Kepler light curve data. Transit-like detections are transformed into a uniform set of real-numbered attributes, the most important of which are described in this paper. Each of the known transit-like detections is assigned a class of planet candidate; astrophysical false positive; or systematic, instrumental noise. We use a random forest algorithm to learn the mapping from attributes to classes on this training set. The random forest algorithm has been used previously to classify variable stars; this is the first time it has been used for exoplanet classification. We are able to achieve an overall error rate of 5.85% and an error rate for classifying exoplanets candidates of 2.81%.

We present the results of a search for potential transit signals in the full 17-quarter data set collected during Kepler's primary mission that ended on May 11, 2013, due to the on-board failure of a second reaction wheel needed to maintain high precision, fixed, pointing. The search includes a total of 198,646 targets, of which 112,001 were observed in every quarter and 86,645 were observed in a subset of the 17 quarters. We find a total of 12,669 targets that contain at least one signal that meets our detection criteria: periodicity of the signal, a minimum of three transit events, an acceptable signal-to-noise ratio, and four consistency tests that suppress false positives. Each target containing at least one transit-like pulse sequence is searched repeatedly for other signals that meet the detection criteria, indicating a multiple planet system. This multiple planet search adds an additional 7,698 transit-like signatures for a total of 20,367. Comparison of this set of detected signals with a set of known and vetted transiting planet signatures in the Kepler field of view shows that the recovery rate of the search is 90.3%. We review ensemble properties of the detected signals and present various metrics useful in validating these potential planetary signals. We highlight previously undetected planetary candidates, including several small potential planets in the habitable zone of their host stars.

Kepler is a space telescope that searches Sun-like stars for planets. Its major goal is to determine {\eta}_Earth, the fraction of Sunlike stars that have planets like Earth. When a planet 'transits' or moves in front of a star, Kepler can measure the concomitant dimming of the starlight. From analysis of the first four months of those measurements for over 150,000 stars, Kepler's science team has determined sizes, surface temperatures, orbit sizes and periods for over a thousand new planet candidates. In this paper, we characterize the period probability distribution function of the super-Earth and Neptune planet candidates with periods up to 132 days, and find three distinct period regimes. For candidates with periods below 3 days the density increases sharply with increasing period; for periods between 3 and 30 days the density rises more gradually with increasing period, and for periods longer than 30 days, the density drops gradually with increasing period. We estimate that 1% to 3% of stars like the Sun are expected to have Earth analog planets, based on the Kepler data release of Feb 2011. This estimate of is based on extrapolation from a fiducial subsample of the Kepler planet candidates that we chose to be nominally 'complete' (i.e., no missed detections) to the realm of the Earth-like planets, by means of simple power law models. The accuracy of the extrapolation will improve as more data from the Kepler mission is folded in. Accurate knowledge of {\eta}_Earth is essential for the planning of future missions that will image and take spectra of Earthlike planets. Our result that Earths are relatively scarce means that a substantial effort will be needed to identify suitable target stars prior to these future missions.

We examine the scientific viability of an imaging mission to find exo-Earths combining the James Webb Space Telescope (JWST) with a starshade external occulter under a realistic set of astrophysical assumptions. We define an exo-Earth as a planet of 1 to 10 Earth masses orbiting in the habitable zone (HZ) of a solar-type star. We show that for a survey strategy that relies on a single image to detect an exo-Earth, roughly half of all exo-Earth detections will be false alarms. Here, a false alarm is a mistaken identification of a planet as an exo-Earth. We consider two survey strategies designed to mitigate the false alarm problem. The first is to require that for each potential exo-Earth, a sufficient number of detections are made to measure the orbit. When the orbit is known we can determine if the planet is in the habitable zone. With this strategy, we find that the number of exo-Earths found is on average 0.9, 1.9 and 2.7 for {\eta}_Earth = 0.1, 0.2 and 0.3. Here, {\eta}_Earth is the frequency of exo-Earths orbiting solar-type stars. There is a ~40% probability of finding zero exo-Earths for {\eta}_Earth = 0.1. A second strategy can be employed if a space astrometry mission has identified and measured the orbits and masses of the planets orbiting nearby stars. We find that with prior space-based astrometry from a survey of 60 nearby stars, JWST plus an external occulter can obtain orbital solutions for the majority (70% to 80%) of the exo-Earths orbiting these 60 stars. The exo-Earth yield is approximately five times higher than the yield for the JWST plus occulter mission without prior astrometry. With prior astrometry, the probability that an imaging mission will find zero exo-Earths is reduced to below 1% for the case of {\eta}_Earth = 0.1.

The holy grail of exoplanet searches is an exo-Earth, an Earth mass planet in the habitable zone around a nearby star. Mass is the most important parameter of a planet and can only be measured by observing the motion of the star around the planet-star center of mass. A single image of a planet, however, does not provide evidence that the planet is Earth mass or that it is in a habitable zone orbit. The planet's orbit, however, can be measured either by imaging the planet at multiple epochs or by measuring the position of the star at multiple epochs by space-based astrometry. The measurement of an exo-planet's orbit by direct imaging is complicated by a number of factors: (1) the inner working angle (IWA); (2) the apparent brightness of the planet depending on the orbital phase; (3) confusion arising from the presence of multiple planets; and (4) the planet-star contrast. In this paper we address the question: "Can a prior astrometric mission that can identify which stars have Earthlike planets significantly improve the science yield of a mission to image exo-Earths?" We find that the Occulting Ozone Observatory (a small external occulter mission that cannot measure spectra) could confirm the orbits of ~4 to ~5 times as many exo-Earths if an astrometric mission preceded it to identify which stars had such planets. We find that in the case of an internal coronagraph, a survey of the nearest ~60 stars could be done with a telescope of half the size if an astrometric mission had first identified the presence of Earth-like planets in the habitable zone and measured their orbital parameters.

We ask if Earth-like planets (terrestrial mass and habitable-zone orbit) can be detected in multi-planet systems, using astrometric and radial velocity observations. We report here the preliminary results of double-blind calculations designed to answer this question.

Space astrometry is capable of sub-microarcsecond measurements of star positions. A hundred visits over several years could yield relative astrometric precision of ~0.1 uas, below the astrometric signature (0.3 uas) of a Sun-Earth system at a distance of 10 parsecs. We investigate the impact of starspots on the detectability, via astrometric and radial velocity techniques, of Earthlike planets orbiting Sunlike stars. We find that for nearby stars, although starspot noise imposes severe restrictions on detectability by the radial velocity technique, it does not significantly affect astrometric detectability of habitable zone planets down to below an Earth mass.

SIM PlanetQuest (Space Interferometry Mission) is a space-borne Michelson interferometer for precision stellar astrometry, with a nine meter baseline, currently slated for launch in 2015. One of the principal science goals is the astrometric detection and orbit characterization of terrestrial planets in the habitable zones of nearby stars. Differential astrometry of the target star against a set of reference stars lying within a degree will allow measurement of the target star's reflex motion with astrometric accuracy of 1 micro-arcsecond in a single measurement. We assess SIM's capability for detection (as opposed to characterization by orbit determination) of terrestrial planets in the habitable zones of nearby solar-type stars. We compare SIM's performance on target lists optimized for the SIM and Terrestrial Planet Finder Coronograph (TPF-C) missions. Performance is quantified by three metrics: minimum detectable planet mass, number and mass distribution of detected planets, and completeness of detections in each mass range. Finally, we discuss the issue of confidence in detections and non-detections, and show how information from SIM's planet survey can enable TPF to increase its yield of terrestrial planets.