-
The Hubble Source Catalog (HSC) combines lists of sources detected on images
obtained with the WFPC2, ACS and WFC3 instruments aboard the Hubble Space
Telescope (HST) available in the Hubble Legacy Archive. The catalog contains
time-domain information with about two million of its sources detected with the
same instrument and filter in at least five HST visits. The Hubble Catalog of
Variables (HCV) project aims to identify HSC sources showing significant
brightness variations. A magnitude-dependent threshold in the median absolute
deviation of photometric measurements (an outlier-resistant measure of
lightcurve scatter) is adopted as the variability-detection statistic. It is
supplemented with a cut in $\chi_{\rm red}^2$ that removes sources with large
photometric errors. A pre-processing procedure involving bad image
identification, outlier rejection and computation of local magnitude zero-point
corrections is applied to HSC lightcurves before computing the variability
detection statistic. About 52000 HSC sources are identified as candidate
variables, among which 7800 show variability in more than one filter. Visual
inspection suggests that $\sim 70\%$ of the candidates detected in multiple
filters are true variables while the remaining $\sim 30\%$ are sources with
aperture photometry corrupted by blending, imaging artifacts or image
processing anomalies. The candidate variables have AB magnitudes in the range
15-27$^{m}$ with the median 22$^{m}$. Among them are the stars in our own and
nearby galaxies as well as active galactic nuclei.
-
We aim to construct an exceptionally deep (V ~< 27) catalog of variable
objects in selected Galactic and extragalactic fields visited multiple times by
the Hubble Space Telescope (HST). While HST observations of some of these
fields were searched for specific types of variables before (most notably, the
extragalactic Cepheids), we attempt a systematic study of the population of
variable objects of all types at the magnitude range not easily accessible with
ground-based telescopes. The variability timescales that can be probed range
from hours to years depending on how often a particular field has been visited.
For source extraction and cross-matching of sources between visits we rely on
the Hubble Source Catalog which includes 10^7 objects detected with WFPC2, ACS,
and WFC3 HST instruments. The lightcurves extracted from the HSC are corrected
for systematic effects by applying local zero-point corrections and are
screened for bad measurements. For each lightcurve we compute variability
indices sensitive to a broad range of variability types. The indices
characterize the overall lightcurve scatter and smoothness. Candidate variables
are selected as having variability index values significantly higher than
expected for objects of similar brightness in the given set of observations.
The Hubble Catalog of Variables will be released in 2018.
-
The Hubble Catalog of Variables (HCV) is a 3 year ESA funded project that
aims to develop a set of algorithms to identify variables among the sources
included in the Hubble Source Catalog (HSC) and produce the HCV. We will
process all HSC sources with more than a predefined number of measurements in a
single filter/instrument combination and compute a range of lightcurve features
to determine the variability status of each source. At the end of the project,
the first release of the Hubble Catalog of Variables will be made available at
the Mikulski Archive for Space Telescopes (MAST) and the ESA Science Archives.
The variability detection pipeline will be implemented at the Space Telescope
Science Institute (STScI) so that updated versions of the HCV may be created
following the future releases of the HSC.
-
List of contributions from the Cherenkov Telescope Array (CTA) Consortium
presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy
(Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
-
In this paper we focus on the construction of stellar outflow models emerging
from a polar coronal hole-type region surrounded by a magnetosphere in the
equatorial regions during phases of quiescent accretion. The models are based
on initial analytical solutions. We adopt a meridionally self-similar solution
of the time-independent and axisymmetric MHD equations which describes
effectively a jet originating from the corona of a star. We modify
appropriately this solution in order to incorporate a physically consistent
stellar magnetosphere. We find that the closed fieldline region may exhibit
different behaviour depending on the associated boundary conditions and the
distribution of the heat flux. However, the stellar jet in all final
equilibrium states is very similar to the analytical one prescribed in the
initial conditions. When the initial net heat flux is maintained, the
magnetosphere takes the form of a dynamical helmet streamer with a quasi steady
state slow magnetospheric wind. With no heat flux, a small dead zone forms
around the equator, surrounded by a weak streamer, source of a low mass flux
magnetospheric ejection. An equilibrium with no streamer and a helmet shaped
dead zone is found when the coronal hole is larger and extends up to a reduced
closed fieldline static zone. The study demonstrates the robustness of
self-similar solutions and their ability to provide quasi-steady jet
simulations with realistic boundaries and surrounded by equatorial
magnetospheres.
-
NELIOTA is a new ESA activity launched at the National Observatory of Athens
in February 2015 aiming to determine the distribution and frequency of small
near-earth objects (NEOs) via lunar monitoring. The project involves upgrading
the 1.2m Kryoneri telescope at the National Observatory of Athens, procuring
two fast-frame cameras, and developing a software system, which will control
the telescope and the cameras, process the images and automatically detect NEO
impacts. NELIOTA will provide a web-based user interface, where the impact
events will be reported and made available to the scientific community and the
general public. The objective of this 3.5 year activity is to design, develop
and implement a highly automated lunar monitoring system, which will conduct an
observing campaign for 2 years in search of NEO impact flashes on the Moon. The
impact events will be verified, characterised and reported. The 1.2m telescope
will be capable of detecting flashes much fainter than current, small-aperture,
lunar monitoring telescopes. NELIOTA is therefore expected to characterise the
frequency and distribution of NEOs weighing as little as a few grams.
-
List of contributions from the CTA Consortium presented at the 34th
International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The
Netherlands.
-
Young stellar object observations suggest that some jets rotate in the
opposite direction with respect to their disk. In a recent study, Sauty et al.
(2012) have shown that this does not contradict the magnetocentrifugal
mechanism that is believed to launch such outflows. Signatures of motions
transverse to the jet axis and in opposite directions have recently been
measured in M87 (Meyer et al. 2013). One possible interpretation of this motion
is the one of counter rotating knots. Here, we extend our previous analytical
derivation of counter-rotation to relativistic jets, demonstrating that
counter-rotation can indeed take place under rather general conditions. We show
that both the magnetic field and a non-negligible enthalpy are necessary at the
origin of counter-rotating outflows, and that the effect is associated with a
transfer of energy flux from the matter to the electromagnetic field. This can
be realized in three cases : if a decreasing enthalpy causes an increase of the
Poynting flux, if the flow decelerates, or, if strong gradients of the magnetic
field are present. An illustration of the involved mechanism is given by an
example of relativistic MHD jet simulation.
-
Astronomical observations, analytical solutions and numerical simulations
have provided the building blocks to formulate the current theory of young
stellar object jets. Although each approach has made great progress
independently, it is only during the last decade that significant efforts are
being made to bring the separate pieces together. Building on previous work
that combined analytical solutions and numerical simulations, we apply a
sophisticated cooling function to incorporate optically thin energy losses in
the dynamics. On the one hand, this allows a self-consistent treatment of the
jet evolution and on the other, it provides the necessary data to generate
synthetic emission maps. Firstly, analytical disk and stellar outflow solutions
are properly combined to initialize numerical two-component jet models inside
the computational box. Secondly, magneto-hydrodynamical simulations are
performed in 2.5D, following properly the ionization and recombination of a
maximum of $29$ ions. Finally, the outputs are post-processed to produce
artificial observational data. The first two-component jet simulations, based
on analytical models, that include ionization and optically thin radiation
losses demonstrate promising results for modeling specific young stellar object
outflows. The generation of synthetic emission maps provides the link to
observations, as well as the necessary feedback for the further improvement of
the available models.
-
Compilation of CTA contributions to the proceedings of the 33rd International
Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de
Janeiro, Brazil
-
Rotation measurement in jets from T Tauri stars is a rather difficult task.
Some jets seem to be rotating in a direction opposite to that of the underlying
disk, although it is not yet clear if this affects the totality or part of the
outflows. On the other hand, Ulysses data also suggest that the solar wind may
rotate in two opposite ways between the northern and southern hemispheres. We
show that this result is not as surprising as it may seem and that it emerges
naturally from the ideal MHD equations. Specifically, counterrotating jets
neither contradict the magnetocentrifugal driving of the flow nor prevent
extraction of angular momentum from the disk. The demonstration of this result
is shown by combining the ideal MHD equations for steady axisymmetric flows.
Provided that the jet is decelerated below some given threshold beyond the
Alfven surface, the flow will change its direction of rotation locally or
globally. Counterrotation is also possible for only some layers of the outflow
at specific altitudes along the jet axis. We conclude that the counterrotation
of winds or jets with respect to the source, star or disk, is not in
contradiction with the magnetocentrifugal driving paradigm. This phenomenon may
affect part of the outflow, either in one hemisphere, or only in some of the
outflow layers. From a time-dependent simulation, we illustrate this effect and
show that it may not be permanent.
-
It is a well established fact that some YSO jets (e.g. RW Aur) display
different propagation speeds between their blue and red shifted parts, a
feature possibly associated with the central engine or the environment in which
the jet propagates. In order to understand the origin of asymmetric YSO jet
velocities, we investigate the efficiency of two candidate mechanisms, one
based on the intrinsic properties of the system and one based on the role of
the external medium. In particular, a parallel or anti-parallel configuration
between the protostellar magnetosphere and the disk magnetic field is
considered and the resulting dynamics are examined both in an ideal and a
resistive magneto-hydrodynamical (MHD) regime. Moreover, we explore the effects
of a potential difference in the pressure of the environment, as a consequence
of the non-uniform density distribution of molecular clouds. Ideal and
resistive axisymmetric numerical simulations are carried out for a variety of
models, all of which are based on a combination of two analytical solutions, a
disk wind and a stellar outflow. We find that jet velocity asymmetries can
indeed occur both when multipolar magnetic moments are present in the star-disk
system as well as when non-uniform environments are considered. The latter case
is an external mechanism that can easily explain the large time scale of the
phenomenon, whereas the former one naturally relates it to the YSO intrinsic
properties. [abridged]
-
We study plasma flows along selected coronal loops in NOAA Active Region
10926, observed on 3 December 2006 with Hinode's EUV Imaging Spectrograph
(EIS). From the shape of the loops traced on intensity images and the Doppler
shifts measured along their length we compute their three-dimensional (3D)
shape and plasma flow velocity using a simple geometrical model. This
calculation was performed for loops visible in the Fe VIII 185 Ang., Fe X 184
Ang., Fe XII 195 Ang., Fe XIII 202 Ang., and Fe XV 284 Ang. spectral lines. In
most cases the flow is unidirectional from one footpoint to the other but there
are also cases of draining motions from the top of the loops to their
footpoints. Our results indicate that the same loop may show different flow
patterns when observed in different spectral lines, suggesting a dynamically
complex rather than a monolithic structure. We have also carried out magnetic
extrapolations in the linear force-free field approximation using SOHO/MDI
magnetograms, aiming toward a first-order identification of extrapolated
magnetic field lines corresponding to the reconstructed loops. In all cases,
the best-fit extrapolated lines exhibit left-handed twist (alpha < 0), in
agreement with the dominant twist of the region.
-
We investigate the initiation and formation of Coronal Mass Ejections (CMEs)
via detailed two-viewpoint analysis of low corona observations of a relatively
fast CME acquired by the SECCHI instruments aboard the STEREO mission. The
event which occurred on January 2, 2008, was chosen because of several unique
characteristics. It shows upward motions for at least four hours before the
flare peak. Its speed and acceleration profiles exhibit a number of inflections
which seem to have a direct counterpart in the GOES light curves. We detect and
measure, in 3D, loops that collapse toward the erupting channel while the CME
is increasing in size and accelerates. We suggest that these collapsing loops
are our first evidence of magnetic evacuation behind the forming CME flux rope.
We report the detection of a hot structure which becomes the core of the white
light CME. We observe and measure unidirectional flows along the erupting
filament channel which may be associated with the eruption process. Finally, we
compare these observations to the predictions from the standard flare-CME model
and find a very satisfactory agreement. We conclude that the standard flare-CME
concept is a reliable representation of the initial stages of CMEs and that
multi-viewpoint, high cadence EUV observations can be extremely useful in
understanding the formation of CMEs.
-
Context: A large sample of T Tauri stars exhibits optical jets, approximately
half of which rotate slowly, only at ten per cent of their breakup velocity.
The disk-locking mechanism has been shown to be inefficient to explain this
observational fact.
Aims: We show that low mass accreting T Tauri stars may have a strong stellar
jet component that can effectively brake the star to the observed rotation
speed.
Methods: By means of a nonlinear separation of the variables in the full set
of the MHD equations we construct semi- analytical solutions describing the
dynamics and topology of the stellar component of the jet that emerges from the
corona of the star.
Results: We analyze two typical solutions with the same mass loss rate but
different magnetic lever arms and jet radii. The first solution with a long
lever arm and a wide jet radius effectively brakes the star and can be applied
to the visible jets of T Tauri stars, such as RY Tau. The second solution with
a shorter lever arm and a very narrow jet radius may explain why similar stars,
either Weak line T Tauri Stars (WTTS) or Classical T Tauri Stars (CTTS) do not
all have visible jets. For instance, RY Tau itself seems to have different
phases that probably depend on the activity of the star.
Conclusions: First, stellar jets seem to be able to brake pre-main sequence
stars with a low mass accreting rate. Second, jets may be visible only part
time owing to changes in their boundary conditions. We also suggest a possible
scenario for explaining the dichotomy between CTTS and WTTS, which rotate
faster and do not have visible jets.
-
The two types of Fanaroff-Riley radio loud galaxies, FRI and FRII, exhibit
strong jets but with different properties. These differences may be associated
to the central engine and/or the external medium. Aims: The AGN classification
FRI and FRII can be linked to the rate of electromagnetic Poynting flux
extraction from the inner corona of the central engine by the jet. The
collimation results from the distribution of the total electromagnetic energy
across the jet, as compared to the corresponding distribution of the thermal
and gravitational energies. We use exact solutions of the fully relativistic
magnetohydrodynamical (GRMHD) equations obtained by a nonlinear separation of
the variables to study outflows from a Schwarzschild black hole corona. A
strong correlation is found between the jet features and the energetic
distribution of the plasma of the inner corona which may be related to the
efficiency of the magnetic rotator. It is shown that observations of FRI and
FRII jets may be partially constrained by our model for spine jets. The
deceleration observed in FRI jets may be associated with a low magnetic
efficiency of the central magnetic rotator and an important thermal confinement
by the hot surrounding medium. Conversely, the strongly collimated and
accelerated FRII outflows may be self collimated by their own magnetic field
because of the high efficiency of the central magnetic rotator.
-
We study the emergence of a toroidal flux tube into the solar atmosphere and
its interaction with a pre-existing field of an active region. We investigate
the emission of jets as a result of repeated reconnection events between
colliding magnetic fields. We perform 3D simulations by solving the
time-dependent, resistive MHD equations in a highly stratified atmosphere. A
small active region field is constructed by the emergence of a toroidal
magnetic flux tube. A current structure is build up and reconnection sets in
when new emerging flux comes into contact with the ambient field of the active
region. The topology of the magnetic field around the current structure is
drastically modified during reconnection. The modification results in a
formation of new magnetic systems that eventually collide and reconnect. We
find that reconnection jets are taking place in successive recurrent phases in
directions perpendicular to each other, while in each phase they release
magnetic energy and hot plasma into the solar atmosphere. After a series of
recurrent appearance of jets, the system approaches an equilibrium where the
efficiency of the reconnection is substantially reduced. We deduce that the
emergence of new magnetic flux introduces a perturbation to the active region
field, which in turn causes reconnection between neighboring magnetic fields
and the release of the trapped energy in the form of jet-like emissions. This
is the first time that self-consistent recurrency of jets in active regions is
shown in a three-dimensional experiment of magnetic flux emergence.
-
Recent observations as well as theoretical studies of YSO jets suggest the
presence of two steady components: a disk wind type outflow needed to explain
the observed high mass loss rates and a stellar wind type outflow probably
accounting for the observed stellar spin down. In this framework, we construct
numerical two-component jet models by properly mixing an analytical disk wind
solution with a complementary analytically derived stellar outflow. Their
combination is controlled by both spatial and temporal parameters, in order to
address different physical conditions and time variable features. We study the
temporal evolution and the interaction of the two jet components on both small
and large scales. The simulations reach steady state configurations close to
the initial solutions. Although time variability is not found to considerably
affect the dynamics, flow fluctuations generate condensations, whose large
scale structures have a strong resemblance to observed YSO jet knots.
-
Theoretical arguments along with observational data of YSO jets suggest the
presence of two steady components: a disk wind type outflow needed to explain
the observed high mass loss rates and a stellar wind type outflow probably
accounting for the observed stellar spin down.
Each component's contribution depends on the intrinsic physical properties of
the YSO-disk system and its evolutionary stage. The main goal of this paper is
to understand some of the basic features of the evolution, interaction and
co-existence of the two jet components over a parameter space and when time
variability is enforced. Having studied separately the numerical evolution of
each type of the complementary disk and stellar analytical wind solutions in
Paper I of this series, we proceed here to mix together the two models inside
the computational box. The evolution in time is performed with the PLUTO code,
investigating the dynamics of the two-component jets, the modifications each
solution undergoes and the potential steady state reached.
-
We present self-consistent global, steady-state MHD models and synthetic
optically thin synchrotron emission maps for the jet of M87. The model consist
of two distinct zones: an inner relativistic outflow, which we identify with
the observed jet, and an outer cold disk-wind. While the former does not
self-collimate efficiently due to its high effective inertia, the latter
fulfills all the conditions for efficient collimation by the
magneto-centrifugal mechanism. Given the right balance between the effective
inertia of the inner flow and the collimation efficiency of the outer disk
wind, the relativistic flow is magnetically confined into a well collimated
beam and matches the measurements of the opening angle of M87 over several
orders of magnitude in spatial extent. The synthetic synchrotron maps reproduce
the morphological structure of the jet of M87, i.e. center-bright profiles near
the core and limb-bright profiles away from the core. At the same time, they
also show a local increase of brightness at some distance along the axis
associated to a recollimation shock in the MHD model. Its location coincides
with the position of the optical knot HST-1. In addition our best fitting model
is consistent with a number of observational constraints such as the magnetic
field in the knot HST-1, and the jet-to-counterjet brightness ratio.
-
We present a self-consistent MHD model for the jet of M87. The model consist
of two distinct zones: an inner relativistic outflow, which we identify with
the observed jet, and an outer cold disk-wind. While the former does not
self-collimate efficiently due to its high effective inertia, the latter
fulfills all the conditions for efficient collimation by the
magneto-centrifugal mechanism. Given the right balance between the effective
inertia of the inner flow and the collimation efficiency of the outer disk
wind, the relativistic flow is magnetically confined into a well collimated
beam for a wide range of parameters and matches the measurements of the opening
angle of M87 over several orders of magnitude in spatial extent.
In the second part of this work, we present synthetic synchrotron emission
maps for our MHD models. In principle the two-zone model can reproduce the
morphological structure seen in radio observations, as central-peaked profiles
across the jet close the the source, limb-bright further down the jet, and a
bright knot close to the position of HST-1. However it is difficult to
reconcile all features into a single set of parameters.
-
Observations of collimated outflows in young stellar objects indicate that
several features of the jets can be understood by adopting the picture of a
two-component outflow, wherein a central stellar component around the jet axis
is surrounded by an extended disk-wind. The precise contribution of each
component may depend on the intrinsic physical properties of the YSO-disk
system as well as its evolutionary stage. In this context, the present article
starts a systematic investigation of two-component jet models via
time-dependent simulations of two prototypical and complementary analytical
solutions, each closely related to the properties of stellar-outflows and
disk-winds. These models describe a meridionally and a radially self-similar
exact solution of the steady-state, ideal hydromagnetic equations,
respectively. By using the PLUTO code to carry out the simulations, the study
focuses on the topological stability of each of the two analytical solutions,
which are successfully extended to all space by removing their singularities.
In addition, their behavior and robustness over several physical and numerical
modifications is extensively examined. It is found that radially self-similar
solutions (disk-winds) always reach a final steady-state while maintaining all
their well-defined properties. The different ways to replace the singular part
of the solution around the symmetry axis, being a first approximation towards a
two-component outflow, lead to the appearance of a shock at the super-fast
domain corresponding to the fast magnetosonic separatrix surface. Conversely,
the asymptotic configuration and the stability of meridionally self-similar
models (stellar-winds) is related to the heating processes at the base of the
wind.
-
We perform a numerical simulation of magnetohydrodynamic radially
self-similar jets, whose prototype is the Blandford & Payne analytical example.
The reached final steady state is valid close to the rotation axis and also at
large distances above the disk where the classical analytical model fails to
provide physically acceptable solutions. The outflow starts with a sub-slow
magnetosonic speed which subsequently crosses all relevant MHD critical points
and corresponding magnetosonic separatrix surfaces. The characteristics are
plotted together with the Mach cones and the super-fast magnetosonic outflow
satisfies MHD causality. The final solution remains close enough to the
analytical one which is thus shown to be topologically stable and robust for
various boundary conditions.
-
Steady axisymmetric outflows originating at the hot coronal magnetosphere of
a Schwarzschild black hole and surrounding accretion disk are studied in the
framework of general relativistic magnetohydrodynamics (GRMHD). The assumption
of meridional self-similarity is adopted for the construction of
semi-analytical solutions of the GRMHD equations describing outflows close to
the polar axis. In addition, it is assumed that relativistic effects related to
the rotation of the black hole and the plasma are negligible compared to the
gravitational and other energetic terms. The constructed model allows us to
extend previous MHD studies for coronal winds from young stars to spine jets
from Active Galactic Nuclei surrounded by disk-driven outflows. The outflows
are thermally driven and magnetically or thermally collimated. The collimation
depends critically on an energetic integral measuring the efficiency of the
magnetic rotator, similarly to the non relativistic case. It is also shown that
relativistic effects affect quantitatively the depth of the gravitational well
and the coronal temperature distribution in the launching region of the
outflow. Similarly to previous analytical and numerical studies, relativistic
effects tend to increase the efficiency of the thermal driving but reduce the
effect of magnetic self-collimation.
-
We apply a two-zone MHD model to the jet of M87. The model consists of an
inner relativistic outflow, which is surrounded by a non-relativistic outer
disk-wind. The outer disk-wind collimates very well through magnetic
self-collimation and confines the inner relativistic jet into a narrow region
around the rotation axis. Further, we show by example, that such models
reproduce very accurately the observed opening angle of the M87 jet over a
large range from the kiloparsec scale down to the sub-parsec scale.
We aim to construct an exceptionally deep (V ~< 27) catalog of variable objects in selected Galactic and extragalactic fields visited multiple times by the Hubble Space Telescope (HST). While HST observations of some of these fields were searched for specific types of variables before (most notably, the extragalactic Cepheids), we attempt a systematic study of the population of variable objects of all types at the magnitude range not easily accessible with ground-based telescopes. The variability timescales that can be probed range from hours to years depending on how often a particular field has been visited. For source extraction and cross-matching of sources between visits we rely on the Hubble Source Catalog which includes 10^7 objects detected with WFPC2, ACS, and WFC3 HST instruments. The lightcurves extracted from the HSC are corrected for systematic effects by applying local zero-point corrections and are screened for bad measurements. For each lightcurve we compute variability indices sensitive to a broad range of variability types. The indices characterize the overall lightcurve scatter and smoothness. Candidate variables are selected as having variability index values significantly higher than expected for objects of similar brightness in the given set of observations. The Hubble Catalog of Variables will be released in 2018.
The Hubble Catalog of Variables (HCV) is a 3 year ESA funded project that aims to develop a set of algorithms to identify variables among the sources included in the Hubble Source Catalog (HSC) and produce the HCV. We will process all HSC sources with more than a predefined number of measurements in a single filter/instrument combination and compute a range of lightcurve features to determine the variability status of each source. At the end of the project, the first release of the Hubble Catalog of Variables will be made available at the Mikulski Archive for Space Telescopes (MAST) and the ESA Science Archives. The variability detection pipeline will be implemented at the Space Telescope Science Institute (STScI) so that updated versions of the HCV may be created following the future releases of the HSC.
In this paper we focus on the construction of stellar outflow models emerging from a polar coronal hole-type region surrounded by a magnetosphere in the equatorial regions during phases of quiescent accretion. The models are based on initial analytical solutions. We adopt a meridionally self-similar solution of the time-independent and axisymmetric MHD equations which describes effectively a jet originating from the corona of a star. We modify appropriately this solution in order to incorporate a physically consistent stellar magnetosphere. We find that the closed fieldline region may exhibit different behaviour depending on the associated boundary conditions and the distribution of the heat flux. However, the stellar jet in all final equilibrium states is very similar to the analytical one prescribed in the initial conditions. When the initial net heat flux is maintained, the magnetosphere takes the form of a dynamical helmet streamer with a quasi steady state slow magnetospheric wind. With no heat flux, a small dead zone forms around the equator, surrounded by a weak streamer, source of a low mass flux magnetospheric ejection. An equilibrium with no streamer and a helmet shaped dead zone is found when the coronal hole is larger and extends up to a reduced closed fieldline static zone. The study demonstrates the robustness of self-similar solutions and their ability to provide quasi-steady jet simulations with realistic boundaries and surrounded by equatorial magnetospheres.
NELIOTA is a new ESA activity launched at the National Observatory of Athens in February 2015 aiming to determine the distribution and frequency of small near-earth objects (NEOs) via lunar monitoring. The project involves upgrading the 1.2m Kryoneri telescope at the National Observatory of Athens, procuring two fast-frame cameras, and developing a software system, which will control the telescope and the cameras, process the images and automatically detect NEO impacts. NELIOTA will provide a web-based user interface, where the impact events will be reported and made available to the scientific community and the general public. The objective of this 3.5 year activity is to design, develop and implement a highly automated lunar monitoring system, which will conduct an observing campaign for 2 years in search of NEO impact flashes on the Moon. The impact events will be verified, characterised and reported. The 1.2m telescope will be capable of detecting flashes much fainter than current, small-aperture, lunar monitoring telescopes. NELIOTA is therefore expected to characterise the frequency and distribution of NEOs weighing as little as a few grams.
Young stellar object observations suggest that some jets rotate in the opposite direction with respect to their disk. In a recent study, Sauty et al. (2012) have shown that this does not contradict the magnetocentrifugal mechanism that is believed to launch such outflows. Signatures of motions transverse to the jet axis and in opposite directions have recently been measured in M87 (Meyer et al. 2013). One possible interpretation of this motion is the one of counter rotating knots. Here, we extend our previous analytical derivation of counter-rotation to relativistic jets, demonstrating that counter-rotation can indeed take place under rather general conditions. We show that both the magnetic field and a non-negligible enthalpy are necessary at the origin of counter-rotating outflows, and that the effect is associated with a transfer of energy flux from the matter to the electromagnetic field. This can be realized in three cases : if a decreasing enthalpy causes an increase of the Poynting flux, if the flow decelerates, or, if strong gradients of the magnetic field are present. An illustration of the involved mechanism is given by an example of relativistic MHD jet simulation.
Rotation measurement in jets from T Tauri stars is a rather difficult task. Some jets seem to be rotating in a direction opposite to that of the underlying disk, although it is not yet clear if this affects the totality or part of the outflows. On the other hand, Ulysses data also suggest that the solar wind may rotate in two opposite ways between the northern and southern hemispheres. We show that this result is not as surprising as it may seem and that it emerges naturally from the ideal MHD equations. Specifically, counterrotating jets neither contradict the magnetocentrifugal driving of the flow nor prevent extraction of angular momentum from the disk. The demonstration of this result is shown by combining the ideal MHD equations for steady axisymmetric flows. Provided that the jet is decelerated below some given threshold beyond the Alfven surface, the flow will change its direction of rotation locally or globally. Counterrotation is also possible for only some layers of the outflow at specific altitudes along the jet axis. We conclude that the counterrotation of winds or jets with respect to the source, star or disk, is not in contradiction with the magnetocentrifugal driving paradigm. This phenomenon may affect part of the outflow, either in one hemisphere, or only in some of the outflow layers. From a time-dependent simulation, we illustrate this effect and show that it may not be permanent.
It is a well established fact that some YSO jets (e.g. RW Aur) display different propagation speeds between their blue and red shifted parts, a feature possibly associated with the central engine or the environment in which the jet propagates. In order to understand the origin of asymmetric YSO jet velocities, we investigate the efficiency of two candidate mechanisms, one based on the intrinsic properties of the system and one based on the role of the external medium. In particular, a parallel or anti-parallel configuration between the protostellar magnetosphere and the disk magnetic field is considered and the resulting dynamics are examined both in an ideal and a resistive magneto-hydrodynamical (MHD) regime. Moreover, we explore the effects of a potential difference in the pressure of the environment, as a consequence of the non-uniform density distribution of molecular clouds. Ideal and resistive axisymmetric numerical simulations are carried out for a variety of models, all of which are based on a combination of two analytical solutions, a disk wind and a stellar outflow. We find that jet velocity asymmetries can indeed occur both when multipolar magnetic moments are present in the star-disk system as well as when non-uniform environments are considered. The latter case is an external mechanism that can easily explain the large time scale of the phenomenon, whereas the former one naturally relates it to the YSO intrinsic properties. [abridged]
We study plasma flows along selected coronal loops in NOAA Active Region 10926, observed on 3 December 2006 with Hinode's EUV Imaging Spectrograph (EIS). From the shape of the loops traced on intensity images and the Doppler shifts measured along their length we compute their three-dimensional (3D) shape and plasma flow velocity using a simple geometrical model. This calculation was performed for loops visible in the Fe VIII 185 Ang., Fe X 184 Ang., Fe XII 195 Ang., Fe XIII 202 Ang., and Fe XV 284 Ang. spectral lines. In most cases the flow is unidirectional from one footpoint to the other but there are also cases of draining motions from the top of the loops to their footpoints. Our results indicate that the same loop may show different flow patterns when observed in different spectral lines, suggesting a dynamically complex rather than a monolithic structure. We have also carried out magnetic extrapolations in the linear force-free field approximation using SOHO/MDI magnetograms, aiming toward a first-order identification of extrapolated magnetic field lines corresponding to the reconstructed loops. In all cases, the best-fit extrapolated lines exhibit left-handed twist (alpha < 0), in agreement with the dominant twist of the region.
We investigate the initiation and formation of Coronal Mass Ejections (CMEs) via detailed two-viewpoint analysis of low corona observations of a relatively fast CME acquired by the SECCHI instruments aboard the STEREO mission. The event which occurred on January 2, 2008, was chosen because of several unique characteristics. It shows upward motions for at least four hours before the flare peak. Its speed and acceleration profiles exhibit a number of inflections which seem to have a direct counterpart in the GOES light curves. We detect and measure, in 3D, loops that collapse toward the erupting channel while the CME is increasing in size and accelerates. We suggest that these collapsing loops are our first evidence of magnetic evacuation behind the forming CME flux rope. We report the detection of a hot structure which becomes the core of the white light CME. We observe and measure unidirectional flows along the erupting filament channel which may be associated with the eruption process. Finally, we compare these observations to the predictions from the standard flare-CME model and find a very satisfactory agreement. We conclude that the standard flare-CME concept is a reliable representation of the initial stages of CMEs and that multi-viewpoint, high cadence EUV observations can be extremely useful in understanding the formation of CMEs.
Context: A large sample of T Tauri stars exhibits optical jets, approximately half of which rotate slowly, only at ten per cent of their breakup velocity. The disk-locking mechanism has been shown to be inefficient to explain this observational fact. Aims: We show that low mass accreting T Tauri stars may have a strong stellar jet component that can effectively brake the star to the observed rotation speed. Methods: By means of a nonlinear separation of the variables in the full set of the MHD equations we construct semi- analytical solutions describing the dynamics and topology of the stellar component of the jet that emerges from the corona of the star. Results: We analyze two typical solutions with the same mass loss rate but different magnetic lever arms and jet radii. The first solution with a long lever arm and a wide jet radius effectively brakes the star and can be applied to the visible jets of T Tauri stars, such as RY Tau. The second solution with a shorter lever arm and a very narrow jet radius may explain why similar stars, either Weak line T Tauri Stars (WTTS) or Classical T Tauri Stars (CTTS) do not all have visible jets. For instance, RY Tau itself seems to have different phases that probably depend on the activity of the star. Conclusions: First, stellar jets seem to be able to brake pre-main sequence stars with a low mass accreting rate. Second, jets may be visible only part time owing to changes in their boundary conditions. We also suggest a possible scenario for explaining the dichotomy between CTTS and WTTS, which rotate faster and do not have visible jets.
The two types of Fanaroff-Riley radio loud galaxies, FRI and FRII, exhibit strong jets but with different properties. These differences may be associated to the central engine and/or the external medium. Aims: The AGN classification FRI and FRII can be linked to the rate of electromagnetic Poynting flux extraction from the inner corona of the central engine by the jet. The collimation results from the distribution of the total electromagnetic energy across the jet, as compared to the corresponding distribution of the thermal and gravitational energies. We use exact solutions of the fully relativistic magnetohydrodynamical (GRMHD) equations obtained by a nonlinear separation of the variables to study outflows from a Schwarzschild black hole corona. A strong correlation is found between the jet features and the energetic distribution of the plasma of the inner corona which may be related to the efficiency of the magnetic rotator. It is shown that observations of FRI and FRII jets may be partially constrained by our model for spine jets. The deceleration observed in FRI jets may be associated with a low magnetic efficiency of the central magnetic rotator and an important thermal confinement by the hot surrounding medium. Conversely, the strongly collimated and accelerated FRII outflows may be self collimated by their own magnetic field because of the high efficiency of the central magnetic rotator.
We study the emergence of a toroidal flux tube into the solar atmosphere and its interaction with a pre-existing field of an active region. We investigate the emission of jets as a result of repeated reconnection events between colliding magnetic fields. We perform 3D simulations by solving the time-dependent, resistive MHD equations in a highly stratified atmosphere. A small active region field is constructed by the emergence of a toroidal magnetic flux tube. A current structure is build up and reconnection sets in when new emerging flux comes into contact with the ambient field of the active region. The topology of the magnetic field around the current structure is drastically modified during reconnection. The modification results in a formation of new magnetic systems that eventually collide and reconnect. We find that reconnection jets are taking place in successive recurrent phases in directions perpendicular to each other, while in each phase they release magnetic energy and hot plasma into the solar atmosphere. After a series of recurrent appearance of jets, the system approaches an equilibrium where the efficiency of the reconnection is substantially reduced. We deduce that the emergence of new magnetic flux introduces a perturbation to the active region field, which in turn causes reconnection between neighboring magnetic fields and the release of the trapped energy in the form of jet-like emissions. This is the first time that self-consistent recurrency of jets in active regions is shown in a three-dimensional experiment of magnetic flux emergence.
Recent observations as well as theoretical studies of YSO jets suggest the presence of two steady components: a disk wind type outflow needed to explain the observed high mass loss rates and a stellar wind type outflow probably accounting for the observed stellar spin down. In this framework, we construct numerical two-component jet models by properly mixing an analytical disk wind solution with a complementary analytically derived stellar outflow. Their combination is controlled by both spatial and temporal parameters, in order to address different physical conditions and time variable features. We study the temporal evolution and the interaction of the two jet components on both small and large scales. The simulations reach steady state configurations close to the initial solutions. Although time variability is not found to considerably affect the dynamics, flow fluctuations generate condensations, whose large scale structures have a strong resemblance to observed YSO jet knots.
Theoretical arguments along with observational data of YSO jets suggest the presence of two steady components: a disk wind type outflow needed to explain the observed high mass loss rates and a stellar wind type outflow probably accounting for the observed stellar spin down. Each component's contribution depends on the intrinsic physical properties of the YSO-disk system and its evolutionary stage. The main goal of this paper is to understand some of the basic features of the evolution, interaction and co-existence of the two jet components over a parameter space and when time variability is enforced. Having studied separately the numerical evolution of each type of the complementary disk and stellar analytical wind solutions in Paper I of this series, we proceed here to mix together the two models inside the computational box. The evolution in time is performed with the PLUTO code, investigating the dynamics of the two-component jets, the modifications each solution undergoes and the potential steady state reached.
We present self-consistent global, steady-state MHD models and synthetic optically thin synchrotron emission maps for the jet of M87. The model consist of two distinct zones: an inner relativistic outflow, which we identify with the observed jet, and an outer cold disk-wind. While the former does not self-collimate efficiently due to its high effective inertia, the latter fulfills all the conditions for efficient collimation by the magneto-centrifugal mechanism. Given the right balance between the effective inertia of the inner flow and the collimation efficiency of the outer disk wind, the relativistic flow is magnetically confined into a well collimated beam and matches the measurements of the opening angle of M87 over several orders of magnitude in spatial extent. The synthetic synchrotron maps reproduce the morphological structure of the jet of M87, i.e. center-bright profiles near the core and limb-bright profiles away from the core. At the same time, they also show a local increase of brightness at some distance along the axis associated to a recollimation shock in the MHD model. Its location coincides with the position of the optical knot HST-1. In addition our best fitting model is consistent with a number of observational constraints such as the magnetic field in the knot HST-1, and the jet-to-counterjet brightness ratio.
We present a self-consistent MHD model for the jet of M87. The model consist of two distinct zones: an inner relativistic outflow, which we identify with the observed jet, and an outer cold disk-wind. While the former does not self-collimate efficiently due to its high effective inertia, the latter fulfills all the conditions for efficient collimation by the magneto-centrifugal mechanism. Given the right balance between the effective inertia of the inner flow and the collimation efficiency of the outer disk wind, the relativistic flow is magnetically confined into a well collimated beam for a wide range of parameters and matches the measurements of the opening angle of M87 over several orders of magnitude in spatial extent. In the second part of this work, we present synthetic synchrotron emission maps for our MHD models. In principle the two-zone model can reproduce the morphological structure seen in radio observations, as central-peaked profiles across the jet close the the source, limb-bright further down the jet, and a bright knot close to the position of HST-1. However it is difficult to reconcile all features into a single set of parameters.
Observations of collimated outflows in young stellar objects indicate that several features of the jets can be understood by adopting the picture of a two-component outflow, wherein a central stellar component around the jet axis is surrounded by an extended disk-wind. The precise contribution of each component may depend on the intrinsic physical properties of the YSO-disk system as well as its evolutionary stage. In this context, the present article starts a systematic investigation of two-component jet models via time-dependent simulations of two prototypical and complementary analytical solutions, each closely related to the properties of stellar-outflows and disk-winds. These models describe a meridionally and a radially self-similar exact solution of the steady-state, ideal hydromagnetic equations, respectively. By using the PLUTO code to carry out the simulations, the study focuses on the topological stability of each of the two analytical solutions, which are successfully extended to all space by removing their singularities. In addition, their behavior and robustness over several physical and numerical modifications is extensively examined. It is found that radially self-similar solutions (disk-winds) always reach a final steady-state while maintaining all their well-defined properties. The different ways to replace the singular part of the solution around the symmetry axis, being a first approximation towards a two-component outflow, lead to the appearance of a shock at the super-fast domain corresponding to the fast magnetosonic separatrix surface. Conversely, the asymptotic configuration and the stability of meridionally self-similar models (stellar-winds) is related to the heating processes at the base of the wind.