
The present work investigates sidewall effects on the characteristics of
threedimensional (3D) compressible flows over a rectangular cavity with aspect
ratios of $L/D=6$ and $W/D=2$ at $Re_D=10^4$ using large eddy simulations
(LES). For the spanwiseperiodic cavity flow, large pressure fluctuations are
present in the shear layer and on the cavity aft wall due to spanwise vortex
rollups and flow impingement. For the finitespan cavity with sidewalls,
pressure fluctuations are reduced due to interference to the vortex rollups
from the sidewalls. Flow oscillations are also reduced by increasing the Mach
number from 0.6 to 1.4. Furthermore, secondary flow inside the cavity enhances
kinetic energy transport in the spanwise direction. Moreover, 3D slotted jets
are placed along the cavity leading edge with the objective of reducing flow
oscillations. Steady blowing into the boundary layer is considered with
momentum coefficient $C_\mu=0.0584$ and $0.0194$ for $M_\infty=0.6$ and $1.4$
cases, respectively. The threedimensionality introduced to the flow by the
jets inhibits large coherent rollups of the spanwise vortices in the shear
layer, yielding $940\%$ reductions in rms pressure and rms velocity for both
spanwiseperiodic and finitespan cavities.

The stability properties of two (2D) and threedimensional (3D) compressible
flows over a rectangular cavity with lengthtodepth ratio of $L/D=6$ is
analyzed at a free stream Mach number of $M_\infty=0.6$ and depthbased
Reynolds number of $Re_D=502$. In this study, we closely examine the influence
of threedimensionality on the wakemode that has been reported to exhibit
highamplitude fluctuations from the formation and ejection of largescale
spanwise vortices. Direct numerical simulation (DNS) and biglobal stability
analysis are utilized to study the instability characteristics of the
wakemode. Using the biglobal stability analysis with the timeaverage flow as
the base state, we capture the global stability properties of the wakemode at
a spanwise wavenumber of $\beta=0$. To uncover spanwise effects on the 2D
wakemode, 3D DNS are performed with cavity widthtodepth ratio of $W/D=1$ and
$2$. We find that the 2D wakemode is not present in the 3D cavity flow for a
wider spanwise setting with $W/D=2$, in which spanwise structures are observed
near the rear region of the cavity. These 3D instabilities are further
investigated via biglobal stability analysis for spanwise wavelengths of
$\lambda/D=0.52.0$ to reveal the eigenspectra of the 3D eigenmodes. Based on
the findings of 2D and 3D global stability analysis, we conclude that the
absence of the wakemode in 3D rectangular cavity flows is due to the release
of kinetic energy from the spanwise vortices to the streamwise vortical
structures that develops from the spanwise instabilities.

Simple aerodynamic configurations under even modest conditions can exhibit
complex flows with a wide range of temporal and spatial features. It has become
common practice in the analysis of these flows to look for and extract
physically important features, or modes, as a first step in the analysis. This
step typically starts with a modal decomposition of an experimental or
numerical dataset of the flow field, or of an operator relevant to the system.
We describe herein some of the dominant techniques for accomplishing these
modal decompositions and analyses that have seen a surge of activity in recent
decades. For a nonexpert, keeping track of recent developments can be
daunting, and the intent of this document is to provide an introduction to
modal analysis that is accessible to the larger fluid dynamics community. In
particular, we present a brief overview of several of the wellestablished
techniques and clearly lay the framework of these methods using familiar linear
algebra. The modal analysis techniques covered in this paper include the proper
orthogonal decomposition (POD), balanced proper orthogonal decomposition
(Balanced POD), dynamic mode decomposition (DMD), Koopman analysis, global
linear stability analysis, and resolvent analysis.