-
(abridged). We outline LBCS (the LOFAR Long-Baseline Calibrator Survey),
whose aim is to identify sources suitable for calibrating the
highest-resolution observations made with the International LOFAR Telescope,
which include baselines >1000 km. Suitable sources must contain significant
correlated flux density (50-100mJy) at frequencies around 110--190~MHz on
scales of a few hundred mas. At least for the 200--300-km international
baselines, we find around 1 suitable calibrator source per square degree over a
large part of the northern sky, in agreement with previous work. This should
allow a randomly selected target to be successfully phase calibrated on the
international baselines in over 50% of cases. Products of the survey include
calibrator source lists and fringe-rate and delay maps of wide areas --
typically a few degrees -- around each source. The density of sources with
significant correlated flux declines noticeably with baseline length over the
range 200--600~km, with good calibrators on the longest baselines appearing
only at the rate of 0.5 per square degree. Coherence times decrease from 1--3
minutes on 200-km baselines to about 1 minute on 600-km baselines, suggesting
that ionospheric phase variations contain components with scales of a few
hundred kilometres. The longest median coherence time, at just over 3 minutes,
is seen on the DE609 baseline, which at 227km is close to being the shortest.
We see median coherence times of between 80 and 110 seconds on the four longest
baselines (580--600~km), and about 2 minutes for the other baselines. The
success of phase transfer from calibrator to target is shown to be influenced
by distance, in a manner that suggests a coherence patch at 150-MHz of the
order of 1 degree.
-
The aim of the LOFAR Epoch of Reionization (EoR) project is to detect the
spectral fluctuations of the redshifted HI 21cm signal. This signal is weaker
by several orders of magnitude than the astrophysical foreground signals and
hence, in order to achieve this, very long integrations, accurate calibration
for stations and ionosphere and reliable foreground removal are essential. One
of the prospective observing windows for the LOFAR EoR project will be centered
at the North Celestial Pole (NCP). We present results from observations of the
NCP window using the LOFAR highband antenna (HBA) array in the frequency range
115 MHz to 163 MHz. The data were obtained in April 2011 during the
commissioning phase of LOFAR. We used baselines up to about 30 km. With about 3
nights, of 6 hours each, effective integration we have achieved a noise level
of about 100 microJy/PSF in the NCP window. Close to the NCP, the noise level
increases to about 180 microJy/PSF, mainly due to additional contamination from
unsubtracted nearby sources. We estimate that in our best night, we have
reached a noise level only a factor of 1.4 above the thermal limit set by the
noise from our Galaxy and the receivers. Our continuum images are several times
deeper than have been achieved previously using the WSRT and GMRT arrays. We
derive an analytical explanation for the excess noise that we believe to be
mainly due to sources at large angular separation from the NCP.
-
M87 is a giant elliptical galaxy located in the centre of the Virgo cluster,
which harbours a supermassive black hole of mass 6.4x10^9 M_sun, whose activity
is responsible for the extended (80 kpc) radio lobes that surround the galaxy.
The energy generated by matter falling onto the central black hole is ejected
and transferred to the intra-cluster medium via a relativistic jet and
morphologically complex systems of buoyant bubbles, which rise towards the
edges of the extended halo. Here we present the first observations made with
the new Low-Frequency Array (LOFAR) of M87 at frequencies down to 20 MHz.
Images of M87 were produced at low radio frequencies never explored before at
these high spatial resolution and dynamic range. To disentangle different
synchrotron models and place constraints on source magnetic field, age and
energetics, we also performed a detailed spectral analysis of M87 extended
radio-halo using these observations together with archival data. We do not find
any sign of new extended emissions; on the contrary the source appears well
confined by the high pressure of the intra-cluster medium. A continuous
injection of relativistic electrons is the model that best fits our data, and
provides a scenario in which the lobes are still supplied by fresh relativistic
particles from the active galactic nuclei. We suggest that the discrepancy
between the low-frequency radio-spectral slope in the core and in the halo
implies a strong adiabatic expansion of the plasma as soon as it leaves the
core area. The extended halo has an equipartition magnetic field strength of
~10 uG, which increases to ~13 uG in the zones where the particle flows are
more active. The continuous injection model for synchrotron ageing provides an
age for the halo of ~40 Myr, which in turn provides a jet kinetic power of
6-10x10^44 erg/s.
-
Aims: This paper discusses the spectral occupancy for performing radio
astronomy with the Low-Frequency Array (LOFAR), with a focus on imaging
observations. Methods: We have analysed the radio-frequency interference (RFI)
situation in two 24-h surveys with Dutch LOFAR stations, covering 30-78 MHz
with low-band antennas and 115-163 MHz with high-band antennas. This is a
subset of the full frequency range of LOFAR. The surveys have been observed
with a 0.76 kHz / 1 s resolution. Results: We measured the RFI occupancy in the
low and high frequency sets to be 1.8% and 3.2% respectively. These values are
found to be representative values for the LOFAR radio environment. Between day
and night, there is no significant difference in the radio environment. We find
that lowering the current observational time and frequency resolutions of LOFAR
results in a slight loss of flagging accuracy. At LOFAR's nominal resolution of
0.76 kHz and 1 s, the false-positives rate is about 0.5%. This rate increases
approximately linearly when decreasing the data frequency resolution.
Conclusions: Currently, by using an automated RFI detection strategy, the LOFAR
radio environment poses no perceivable problems for sensitive observing. It
remains to be seen if this is still true for very deep observations that
integrate over tens of nights, but the situation looks promising. Reasons for
the low impact of RFI are the high spectral and time resolution of LOFAR;
accurate detection methods; strong filters and high receiver linearity; and the
proximity of the antennas to the ground. We discuss some strategies that can be
used once low-level RFI starts to become apparent. It is important that the
frequency range of LOFAR remains free of broadband interference, such as DAB
stations and windmills.
-
When an ultra-high energy neutrino or cosmic ray strikes the Lunar surface a
radio-frequency pulse is emitted. We plan to use the LOFAR radio telescope to
detect these pulses. In this work we propose an efficient trigger
implementation for LOFAR optimized for the observation of short radio pulses.