• During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.
• This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.
• Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure of iron target plates and scintillator trackers. INGRID directly monitors the muon neutrino beam profile center and intensity using the number of observed neutrino events in each module. The neutrino beam direction is measured with accuracy better than 0.4 mrad from the measured profile center. The normalized event rate is measured with 4% precision.
• ### Spectroscopic investigations of a Ti:Tm:LiNbO3 waveguide for photon-echo quantum memory(0911.4947)

Nov. 25, 2009 quant-ph, physics.optics
We report the fabrication and characterization of a Ti$^{4+}$:Tm$^{3+}$:LiNbO$_3$ optical waveguide in view of photon-echo quantum memory applications. In particular, we investigated room- and cryogenic-temperature properties via absorption, spectral hole burning, photon echo, and Stark spectroscopy. We found radiative lifetimes of 82 $\mu$s and 2.4 ms for the $^3$H$_4$ and $^3$F$_4$ levels, respectively, and a 44% branching ratio from the $^3$H$_{4}$ to the $^3$F$_4$ level. We also measured an optical coherence time of 1.6 $\mu$s for the $^3$H$_6\leftrightarrow{}^3$H$_4$, 795 nm wavelength transition, and investigated the limitation of spectral diffusion to spectral hole burning. Upon application of magnetic fields of a few hundred Gauss, we observed persistent spectral holes with lifetimes up to seconds. Furthermore, we measured a linear Stark shift of 25 kHz$\cdot$cm/V. Our results are promising for integrated, electro-optical, waveguide quantum memory for photons.
• ### Effects of finite probe size on self-affine roughness measurements(0909.2447)

The roughness of fracture surfaces has been shown to exhibit self-affne scale invariance for a wide variety of materials and loading conditions. The range of scales over which this regime extends remains a matter of debate, together with the universality of the associated exponents. The topography of these surfaces is however often investigated with a contact probe that is larger than the micro-structure. In this case, we show that the correlation function of the roughness and the corresponding Hurst exponent $\zeta$ can only be measured down to a length scale $\Delta xc$ which depends on the probe size $R$, on $\zeta$ and on the surface topothesy $l$, and exhibit spurious behavior at smaller scales. First, we derive the dependence of $\Delta xc$ on these parameters from a simple scaling argument. Then we study this dependence numerically and verify our theoretical prediction. Finally, we establish the relevance of this analysis from AFM measurements on an experimental glass fracture surface and provide a metrological procedure for roughness measurements.
• ### Dynamic condensation of water at crack tips in fused silica glass(0704.2531)

June 18, 2007 cond-mat.mtrl-sci
Water molecules play a fundamental role in the physics of slow crack propagation in glasses. It is commonly understood that, during stress-corrosion, water molecules that move in the crack cavity effectively reduce the bond strength at the strained crack tip and, thus, support crack propagation. Yet the details of the environmental condition at the crack tip in moist air are not well determined. In a previous work, we reported direct evidence of the presence of a 100 nm long liquid condensate at the crack tip in fused silica glass during very slow crack propagation (10^-9 to 10^-10 m/s). These observations are based on in-situ AFM phase imaging techniques applied on DCDC glass specimens in controlled atmosphere. Here, we discuss the physical origin of the AFM phase contrast between the liquid condensate and the glass surface in relation to tip-sample adhesion induced by capillary bridges. We then report new experimental data on the water condensation length increase with relative humidity in the atmosphere. The measured condensation lengths were much larger than what predicted using the Kelvin equation and expected geometry of the crack tip.