• ### Top quark mass studies with $t\bar{t}j$ at the LHC(1710.07515)

March 13, 2018 hep-ph
A precise measurement of the top quark mass, a fundamental parameter of the Standard Model, is among the most important goals of top quark studies at the Large Hadron Collider. Apart from the standard methods, numerous new observables and reconstruction techniques are employed to improve the overall precision and to provide different sensitivities to various systematic uncertainties. Recently, the normalised inverse invariant mass distribution of the $t\bar{t}$ system and the leading extra jet not coming from the top quark decays has been proposed for the $pp \to t\bar{t}j$ production process, denoted as ${\cal R}(m_t^{pole},\rho_s)$. In this paper, a thorough study of different theoretical predictions for this observable, however, with top quark decays included, is carried out. We focus on fixed order NLO QCD calculations for the di-lepton top quark decay channel at the LHC with $\sqrt{s}=13$ TeV. First, the impact on the extraction of $m_t$ is investigated and afterwards the associated uncertainties are quantified. In one approach we include all interferences, off-shell effects and non-resonant backgrounds. This is contrasted with a different approach with top quark decays in the narrow width approximation. In the latter case, two cases are employed: NLO QCD corrections to the $pp\to t\bar{t}j$ production process with leading order decays and the more sophisticated case with QCD corrections and jet radiation present also in top quark decays. The top quark mass sensitivity of ${\cal R}(m_t^{pole},\rho_s)$ is investigated and compared to other observables: the invariant mass of the top anti-top pair, the minimal invariant mass of the $b$-jet and a charged lepton as well as the total transverse momentum of the $t\bar{t}j$ system.
• ### Interpreting top-quark LHC measurements in the standard-model effective field theory(1802.07237)

Feb. 20, 2018 hep-ph, hep-ex
This note proposes common standards and prescriptions for the effective-field-theory interpretation of top-quark measurements at the LHC.
• ### Off-shell $t\bar{t}j$ production and top quark mass studies at the LHC(1711.01831)

Nov. 6, 2017 hep-ph
Precision studies of the properties of the top quark represent a cornerstone of the LHC physics program. In this contribution we focus on the production of $t\bar{t}$ pairs in association with one hard jet and in particular on its connection with precision measurements of the top quark mass at the LHC. We report a summary of a full calculation of the process $pp \to e^+\nu_e\mu^-\bar{\nu}_\mu b \bar{b}j$ at NLO QCD accuracy, which describes $t\bar{t}j$ production with leptonic decays beyond the Narrow Width Approximation (NWA), and discuss the impact of the off-shell effects through comparisons with NWA. Finally we explore the sensitivity of $t\bar{t}j$ in the context of top-quark mass extraction with the template method, considering two benchmark observables as case studies.
• This Report summarizes the results of the activities of the LHC Higgs Cross Section Working Group in the period 2014-2016. The main goal of the working group was to present the state-of-the-art of Higgs physics at the LHC, integrating all new results that have appeared in the last few years. The first part compiles the most up-to-date predictions of Higgs boson production cross sections and decay branching ratios, parton distribution functions, and off-shell Higgs boson production and interference effects. The second part discusses the recent progress in Higgs effective field theory predictions, followed by the third part on pseudo-observables, simplified template cross section and fiducial cross section measurements, which give the baseline framework for Higgs boson property measurements. The fourth part deals with the beyond the Standard Model predictions of various benchmark scenarios of Minimal Supersymmetric Standard Model, extended scalar sector, Next-to-Minimal Supersymmetric Standard Model and exotic Higgs boson decays. This report follows three previous working-group reports: Handbook of LHC Higgs Cross Sections: 1. Inclusive Observables (CERN-2011-002), Handbook of LHC Higgs Cross Sections: 2. Differential Distributions (CERN-2012-002), and Handbook of LHC Higgs Cross Sections: 3. Higgs properties (CERN-2013-004). The current report serves as the baseline reference for Higgs physics in LHC Run 2 and beyond.
• ### Physics at a 100 TeV pp collider: Standard Model processes(1607.01831)

July 6, 2016 hep-ph, hep-ex
This report summarises the properties of Standard Model processes at the 100 TeV pp collider. We document the production rates and typical distributions for a number of benchmark Standard Model processes, and discuss new dynamical phenomena arising at the highest energies available at this collider. We discuss the intrinsic physics interest in the measurement of these Standard Model processes, as well as their role as backgrounds for New Physics searches.
• ### High precision fundamental constants at the TeV scale(1405.4781)

May 19, 2014 hep-ph
This report summarizes the proceedings of the 2014 Mainz Institute for Theoretical Physics (MITP) scientific program on "High precision fundamental constants at the TeV scale". The two outstanding parameters in the Standard Model dealt with during the MITP scientific program are the strong coupling constant $\alpha_s$ and the top-quark mass $m_t$. Lacking knowledge on the value of those fundamental constants is often the limiting factor in the accuracy of theoretical predictions. The current status on $\alpha_s$ and $m_t$ has been reviewed and directions for future research have been identified.
• ### Handbook of LHC Higgs Cross Sections: 3. Higgs Properties(1307.1347)

Nov. 29, 2013 hep-ph, hep-ex
This Report summarizes the results of the activities in 2012 and the first half of 2013 of the LHC Higgs Cross Section Working Group. The main goal of the working group was to present the state of the art of Higgs Physics at the LHC, integrating all new results that have appeared in the last few years. This report follows the first working group report Handbook of LHC Higgs Cross Sections: 1. Inclusive Observables (CERN-2011-002) and the second working group report Handbook of LHC Higgs Cross Sections: 2. Differential Distributions (CERN-2012-002). After the discovery of a Higgs boson at the LHC in mid-2012 this report focuses on refined prediction of Standard Model (SM) Higgs phenomenology around the experimentally observed value of 125-126 GeV, refined predictions for heavy SM-like Higgs bosons as well as predictions in the Minimal Supersymmetric Standard Model and first steps to go beyond these models. The other main focus is on the extraction of the characteristics and properties of the newly discovered particle such as couplings to SM particles, spin and CP-quantum numbers etc.
• ### Snowmass 2013 Top quark working group report(1311.2028)

Nov. 8, 2013 hep-ph, hep-ex
This report summarizes the work of the Energy Frontier Top Quark working group of the 2013 Community Summer Study (Snowmass).
• ### Adiabatic pumping in the quasi-one-dimensional triangle lattice(1208.6113)

Jan. 20, 2013 cond-mat.mes-hall
We analyze the properties of the quasi-one-dimensional triangle lattice emphasizing the occurrence of flat bands and band touching via the tuning of the lattice hopping parameters and on-site energies. The spectral properties of the infinite system will be compared with the transmission through a finite piece of the lattice with attached semi-infinite leads. Furthermore, we investigate the adiabatic pumping properties of such a system: depending on the transmission through the lattice, this results in nonzero integer charge transfers or transfers that increase linearly with the lattice size.
• ### High dispersive and monolithic 100% efficiency grisms(1211.5260)

Nov. 22, 2012 physics.optics
We present a type of grism, a series combination of transmission grating and prism, in which we reduce the number of diffraction orders and achieve a configuration with very high angular dispersion. The grism can be fabricated from a single dielectric material and requires no metallic or dielectric film layers for high transmission diffraction efficiency. One can reach 100% in the -1st transmission diffraction order and the equal damage threshold as the dielectric bulk material. We realized such an element in fused silica with an efficiency of more then 99%. The bevel backside reflection is reduced by a statistical antireflective structure, so we measured an efficiency of the entire grism of 95% at a single wavelength.
• ### The SM and NLO Multileg and SM MC Working Groups: Summary Report(1203.6803)

May 9, 2012 hep-ph, hep-ex
The 2011 Les Houches workshop was the first to confront LHC data. In the two years since the previous workshop there have been significant advances in both soft and hard QCD, particularly in the areas of multi-leg NLO calculations, the inclusion of those NLO calculations into parton shower Monte Carlos, and the tuning of the non-perturbative parameters of those Monte Carlos. These proceedings describe the theoretical advances that have taken place, the impact of the early LHC data, and the areas for future development.
• ### Standard Model Handles and Candles Working Group: Tools and Jets Summary Report(0803.0678)

March 5, 2008 hep-ph
This report summarizes the activity on comparisons of existings tools for the standard model and on issues in jet physics by the SMHC working group during and subsequent to the Workshop "Physics at TeV Colliders", Les Houches, France, 11-29 June, 2007.
• ### Electroweak corrections to large transverse momentum production of W bosons at the LHC(hep-ph/0703283)

March 27, 2007 hep-ph
To match the precision of present and future measurements of W-boson production at hadron colliders, electroweak radiative corrections must be included in the theory predictions. In this paper we consider their effect on the transverse momentum (p_T) distribution of W bosons, with emphasis on large p_T. We evaluate the full electroweak O(\alpha) corrections to the process pp -> Wj including virtual and real photonic contributions. We also provide compact approximate expressions which are valid in the high-energy region, where the electroweak corrections are strongly enhanced by logarithms of \hat{s}/M_W^2. These expressions include quadratic and single logarithms at one loop as well as quartic and triple logarithms at two loops. Numerical results are presented for proton-proton collisions at 14 TeV. The corrections are negative and their size increases with p_T. At the LHC, where transverse momenta of 2 TeV or more can be reached, the one- and two-loop corrections amount up to -40% and +10%, respectively.
• ### Electroweak corrections to hadronic photon production at large transverse momenta(hep-ph/0508253)

Aug. 24, 2005 hep-ph
We study the impact of electroweak radiative corrections on direct production of photons with high transverse momenta at hadron colliders. Analytic results for the weak one-loop corrections to the parton scattering reaction $\bar q q \to \gamma g$ and its crossed variants are presented. For the high-energy region, where the corrections are strongly enhanced by logarithms of $\hat s/M_W^2$, we derive simple asymptotic expressions which approximate the exact one-loop results with high precision. The dominant two-loop electroweak contributions are also calculated. Numerical results are presented for the LHC and the Tevatron. The corrections are negative and their size increases with transverse momentum. For the LHC, where transverse momenta of 2 TeV or more can be reached, the size of the one- and two-loop effects amounts up to -17% and +3%, respectively. At the Tevatron, with transverse momenta up to 400 GeV, the one-loop corrections do not exceed -4% and the two-loop effects are negligible. Finally we compare the cross sections for hadronic production of photons and Z bosons and find that the electroweak corrections have an important impact on their ratio.
• ### One-loop weak corrections to hadronic production of Z bosons at large transverse momenta(hep-ph/0507178)

July 14, 2005 hep-ph
To match the precision of present and future measurements of Z-boson production at hadron colliders, electroweak radiative corrections must be included in the theory predictions. In this paper we consider their effect on the transverse momentum ($p_T$) distribution of Z bosons, with emphasis on large $p_T$. We evaluate, analytically and numerically, the full one-loop corrections for the parton scattering reaction $q\bar q \to Z g$ and its crossed variants. In addition we derive compact approximate expressions which are valid in the high-energy region, where the weak corrections are strongly enhanced by logarithms of $\hat s/M_W^2$. These expressions include quadratic and single logarithms as well as those terms that are not logarithmically enhanced. This approximation, which confirms and extends earlier results obtained to next-to-leading logarithmic accuracy, permits to reproduce the exact one-loop corrections with high precision. Numerical results are presented for proton-proton and proton-antiproton collisions. The corrections are negative and their size increases with $p_T$. For the Tevatron they amount up to -7% at 300 GeV. For the LHC, where transverse momenta of 2 TeV or more can be reached, corrections up to -40% are observed. We also include the dominant two-loop effects of up to 8% in our final LHC predictions.
• ### Logarithmic electroweak corrections to hadronic Z+1 jet production at large transverse momentum(hep-ph/0408308)

March 21, 2005 hep-ph
We consider hadronic production of a Z boson in association with a jet and study one- and two-loop electroweak logarithmic corrections in the region of high Z-boson transverse momentum, p_T >> M_Z, including leading and next-to-leading logarithms. Numerical results for the LHC and Tevatron colliders are presented. At the LHC these corrections amount to tens of per cent and will be important for interpretation of the measurements.
• ### The Beam Halo Experiment at the LEDA Facility(physics/0008159)

Aug. 18, 2000 physics.acc-ph
Due to the potentially adverse effects of the generation of halo particles in intense proton beams, it is imperative to have a clear understanding of the mechanisms that can lead to halo formation for current and proposed high- intensity linacs. To this end a theoretical model has been developed, which indicates that protons under the combined influence of strong space charge forces and periodic focussing in a linear transport channel can be kicked into halo orbits. However, no experimental measurements of beam halo in proton beams have yet been carried out. In this paper we report the progress of an effort to carry out an experiment to measure beam-halo using the existing high- intensity proton beam of the LEDA facility. A linear transport channel has been assembled with the appropriate diagnostics for measuring the expected small beam component in the beam halo as a function of beam parameters. The experiment is based on the use of an array of high-dynamic-range wire and beam scrapers to determine the halo and core profiles along the transport channel. Details of the experimental design, the expected halo measurement properties will be presented.
• ### Overview of the APT Accelerator Design(physics/0008056)

Aug. 14, 2000 physics.acc-ph
The accelerator for the APT Project is a 100 mA CW proton linac with an output energy of 1030 MeV. A High Energy Beam Transport (HEBT) conveys the beam to a raster expander, that provides a large rectangular distribution at a target/blanket (T/B) assembly. Spallation neutrons generated by the proton beam in the T/B reacts with Helium-3 to produce tritium. The design of the APT linac is an integrated normal-conducting (NC)/superconducting (SC) proton linac; the machine architecture has been discussed elsewhere [1]. The NC linac consists of a 75 keV injector, a 6.7-MeV 350-MHz RFQ (radio frequency quadrupole), a 96-MeV 700-MHz CCDTL (coupled-cavity drift-tube linac), and a 700-MHz CCL (coupled-cavity linac), with an output energy of 211 MeV. This is followed by a SC linac, that employs 700-MHz elliptical niobium 5-cell cavities to accelerate the beam to the final energy. The SC linac has two sections, optimized for beam velocities of b =0.64 and b =0.82. Each section is made up of cryomodules containing two, three, or four 5-cell cavities, driven by 1-MW 700-MHz klystrons. The singlet FODO lattice in the NC linac transitions to a doublet focusing lattice in the SC linac, with conventional quadrupole magnets in the warm inter-module spaces. This doublet lattice is continued in the HEBT. An overview of the current linac design will be presented.