• In the era of vast spectroscopic surveys focusing on Galactic stellar populations, astronomers want to exploit the large quantity and good quality of data to derive their atmospheric parameters without losing precision from automatic procedures. In this work, we developed a new spectral package, FASMA, to estimate the stellar atmospheric parameters (namely effective temperature, surface gravity, and metallicity) in a fast and robust way. This method is suitable for spectra of FGK-type stars in medium and high resolution. The spectroscopic analysis is based on the spectral synthesis technique using the radiative transfer code, MOOG. The line list is comprised of mainly iron lines in the optical spectrum. The atomic data are calibrated after the Sun and Arcturus. We use two comparison samples to test our method, i) a sample of 451 FGK-type dwarfs from the high resolution HARPS spectrograph, and ii) the Gaia-ESO benchmark stars using both high and medium resolution spectra. We explore biases in our method from the analysis of synthetic spectra covering the parameter space of our interest. We show that our spectral package is able to provide reliable results for a wide range of stellar parameters, different rotational velocities, different instrumental resolutions, and for different spectral regions of the VLT-GIRAFFE spectrographs, used among others for the Gaia-ESO survey. FASMA estimates stellar parameters in less than 15 min for high resolution and 3 min for medium resolution spectra. The complete package is publicly available to the community.
  • In this work we present chemical abundances of heavy elements (Z$>$28) for a homogeneous sample of 1059 stars from HARPS planet search program. We also derive ages using parallaxes from Hipparcos and Gaia DR1 to compare the results. We study the [X/Fe] ratios for different populations and compare them with models of Galactic chemical evolution. We find that thick disk stars are chemically disjunt for Zn and Eu. Moreover, the high-alpha metal-rich population presents an interesting behaviour, with clear overabundances of Cu and Zn and lower abundances of Y and Ba with respect to thin disk stars. Several abundance ratios present a significant correlation with age for chemically separated thin disk stars (regardless of their metallicity) but thick disk stars do not present that behaviour. Moreover, at supersolar metallicities the trends with age tend to be weaker for several elements.
  • To understand the formation and evolution of the different stellar populations within our Galaxy it is essential to combine detailed kinematical and chemical information for large samples of stars. We derive chemical abundances of Cu, Zn, Sr, Y, Zr, Ba, Ce, Nd and Eu for a large sample of more than 1000 FGK dwarf stars with high-resolution ($R \sim$\,115000) and high-quality spectra from the HARPS-GTO program. The abundances are derived by a standard Local Thermodinamyc Equilibrium (LTE) analysis using measured Equivalent Widths (EWs) injected to the code MOOG and a grid of Kurucz ATLAS9 atmospheres. We find that thick disk stars are chemically disjunct for Zn and Eu and also show on average higher Zr but lower Ba and Y when compared to the thin disk stars. We also discovered that the previously identified high-$\alpha$ metal-rich population is also enhanced in Cu, Zn, Nd and Eu with respect to the thin disk but presents Ba and Y abundances lower on average, following the trend of thick disk stars towards higher metallities and further supporting the different chemical composition of this population. The ratio of heavy-s to light-s elements of thin disk stars presents the expected behaviour (increasing towards lower metallicities) and can be explained by a major contribution of low-mass AGB stars for s-process production at disk metallicities. However, the opposite trend found for thick disk stars suggests that intermediate-mass AGB stars played an important role in the enrichment of the gas from where these stars formed. Previous works in the literature also point to a possible primary production of light-s elements at low metallicities to explain this trend. Finally, we also find an enhancement of light-s elements in the thin disk at super solar metallicities which could be caused by the contribution of metal-rich AGB stars. (short version)
  • Context: Thanks to the importance that the star-planet relation has to our understanding of the planet formation process, the precise determination of stellar parameters for the ever increasing number of discovered extrasolar planets is of great relevance. Furthermore, precise stellar parameters are needed to fully characterize the planet properties. It is thus important to continue the efforts to determine, in the most uniform way possible, the parameters for stars with planets as new discoveries are announced. Aims: In this paper we present new precise atmospheric parameters for a sample of 50 stars with planets. The results are presented in the catalogue: SWEET-Cat. Methods: Stellar atmospheric parameters and masses for the 50 stars were derived assuming local thermodynamic equilibrium (LTE) and using high-resolution and high signal-to-noise spectra. The methodology used is based on the measurement of equivalent widths with ARES2 for a list of iron lines. The line abundances were derived using MOOG. We then used the curve of growth analysis to determine the parameters. We implemented a new minimization procedure which significantly improves the computational time. Results: The stellar parameters for the 50 stars are presented and compared with previously determined literature values. For SWEET-Cat, we compile values for the effective temperature, surface gravity, metallicity, and stellar mass for almost all the planet host stars listed in the Extrasolar Planets Encyclopedia. This data will be updated on a continuous basis. The data can be used for statistical studies of the star-planet correlation, and for the derivation of consistent properties for known planets.
  • The ever-growing number of large spectroscopic survey programs has increased the importance of fast and reliable methods with which to determine precise stellar parameters. Some of these methods are highly dependent on correct spectroscopic calibrations. The goal of this work is to obtain a new spectroscopic calibration for a fast estimate of Teff and [Fe/H] for a wide range of stellar spectral types. We used spectra from a joint sample of 708 stars, compiled from 451 FGK dwarfs and 257 GK-giant stars. We used homogeneously determined spectroscopic stellar parameters to derive temperature calibrations using a set of selected EW line-ratios, and [Fe/H] calibrations using a set of selected FeI lines. We have derived 322 EW line-ratios and 100 FeI lines that can be used to compute Teff and [Fe/H], respectively. We show that these calibrations are effective for FGK dwarfs and GK-giant stars in the following ranges: 4500 K < Teff < 6500 K , 2.5 < logg < 4.9 dex, and -0.8 < [Fe/H] < 0.5 dex. The new calibration has a standard deviation of 74 K for Teff and 0.07 dex for [Fe/H]. We use four independent samples of stars to test and verify the new calibration, a sample of 56 giant stars, a sample composed of Gaia FGK benchmark stars, a sample of 36 GK-giant stars of the DR1 of the Gaia-ESO survey, and a sample of 582 FGK-dwarf stars. We also provide a new computer code, GeTCal, for automatically producing new calibration files based on any new sample of stars.
  • We report the discovery of EPIC201702477b, a transiting brown dwarf in a long period (40.73691 +/- 0.00037 day) and eccentric (e=0.2281 +/- 0.0026) orbit. This system was initially reported as a planetary candidate based on two transit events seen in K2 Campaign 1 photometry and later validated as an exoplanet. We confirm the transit and refine the ephemeris with two subsequent ground-based detections of the transit using the LCOGT 1m telescope network. We rule out any transit timing variations above the level of 30s. Using high precision radial velocity measurements from HARPS and SOPHIE we identify the transiting companion as a brown dwarf with a mass, radius, and bulk density of 66.9 +/- 1.7 M$_J$, 0.757 +/- 0.065 R$_J$, and 191+/-51 g.cm$^{-3}$ respectively. EPIC201702477b is the smallest radius brown dwarf yet discovered, with a mass just below the H-burning limit. It has the highest density of any planet, substellar mass object or main-sequence star discovered so far. We find evidence in the set of known transiting brown dwarfs for two populations of objects - high mass brown dwarfs and low mass brown dwarfs. The higher-mass population have radii in very close agreement to theoretical models, and show a lower-mass limit around 60 M$_J$. This may be the signature of mass-dependent ejection of systems during the formation process.
  • We report the discovery of the two hot-Jupiters K2-30b and K2-34b. The two planets were detected transiting their main-sequence star with periods $\sim$ 4.099 and $\sim$ 2.996 days, in campaigns 4 and 5 of the extension of the Kepler mission, K2. Subsequent ground-based radial velocity follow-up with SOPHIE, HARPS-N and CAFE, established the planetary nature of the transiting objects. We analyzed the transit signal, radial velocity and spectral energy distributions of the two systems to characterize their properties. Both planets (K2-30b and K2-34b) are bloated hot-Jupiters (1.25 $R_{\rm Jup}$ and 1.33 $R_{\rm Jup}$) around relatively bright (V =13.5 and V=11.5), slow rotating main-sequence (G8 and F9) stars. Thus, these systems are good candidates for detecting the Rossiter-MacLaughlin effect to measure their obliquity and for atmospheric studies.
  • In the present paper we report the discovery of a new hot Jupiter, EPIC211089792 b, first detected by the Super-WASP observatory and then by the K2 space mission during its campaign 4. The planet has a period of 3.25d, a mass of 0.73 +/- 0.04 Mjup, and a radius of 1.19 +/- 0.02 Rjup. The host star is a relatively bright (V=12.5) G7 dwarf with a nearby K5V companion. Based on stellar rotation and the abundance of Lithium, we find that the system might be as young as about 450 Myr. The observation of the Rossiter-McLaughlin effect shows the planet is aligned with respect to the stellar spin. Given the deep transit (20mmag), the magnitude of the star and the presence of a nearby stellar companion, the planet is a good target for both space- and ground-based transmission spectroscopy, in particular in the near-infrared where the both stars are relatively bright.
  • The aim of this work is to search for Li-rich giants in a sample of clusters where planets have been searched, thus we can study the planet engulfment scenario to explain Li replenishment using a proper comparison sample of stars without detected giant planets. We derived Li abundances for a sample of 67 red giant stars in 12 different open clusters using standard spectral synthesis techniques and high resolution spectra (from HARPS and UVES). We also determined masses, ages and radius from PARSEC stellar isochrones to constrain the evolutionary stage of these stars. We find three stars in different clusters with clearly enhanced Li abundances compared to other stars within the cluster. Interestingly, the only two stars with a detected substellar companion in our sample belong to that group. One of the planet hosts, NGC2423No3, might lie close to the luminosity bump on the HR diagram, a phase where Li production by the Cameron-Fowler process is supported by extra-mixing to bring fresh Li up to the surface. On the other hand, NGC4349No127 is a more massive and more evolved giant that does not seem to be in the evolutionary phase where other Li-rich stars are found. We discuss the possibility that the Li enhancement of this star is triggered by the engulfment of a planet, considering that close-in planets hardly survive the RGB-tip and the early-AGB phases.
  • Aims: We evaluate the radial velocity (RV) information content and achievable precision on M0-M9 spectra covering the ZYJHK bands. We do so while considering both a perfect atmospheric transmission correction and discarding areas polluted by deep telluric features, as done in previous works. Methods: To simulate the M-dwarf spectra, PHOENIX-ACES model spectra were employed; they were convolved with rotational kernels and instrumental profiles to reproduce stars with a $v.sin{i}$ of 1.0, 5.0, and 10.0 km/s when observed at resolutions of 60 000, 80 000, and 100 000. We considered the RV precision as calculated on the whole spectra, after discarding strongly polluted areas, and after applying a perfect telluric correction. In our simulations we paid particular attention to the details of the convolution and sampling of the spectra, and we discuss their impact on the final spectra. Results: Our simulations show that the most important parameter ruling the difference in attainable precision between the considered bands is the spectral type. For M0-M3 stars, the bands that deliver the most precise RV measurements are the Z, Y, and H band, with relative merits depending on the parameters of the simulation. For M6-M9 stars, the bands show a difference in precision that is within a factor of $\sim$2 and does not clearly depend on the band; this difference is reduced to a factor smaller than $\sim$1.5 if we consider a non-rotating star seen at high resolution. We also show that an M6-M9 spectrum will deliver a precision about two times better as an M0-M3 spectra with the same signal-to-noise ratio. Finally, we note that the details of modelling the Earth atmosphere and interpreting the results have a significant impact on which wavelength regions are discarded when setting a limit threshold at 2-3%. (abridged)
  • While giant extrasolar planets have been studied for more than two decades now, there are still some open questions such as their dominant formation and migration process, as well as their atmospheric evolution in different stellar environments. In this paper, we study a sample of giant transiting exoplanets detected by the Kepler telescope with orbital periods up to 400 days. We first defined a sample of 129 giant-planet candidates that we followed up with the SOPHIE spectrograph (OHP, France) in a 6-year radial velocity campaign. This allow us to unveil the nature of these candidates and to measure a false-positive rate of 54.6 +/- 6.5 % for giant-planet candidates orbiting within 400 days of period. Based on a sample of confirmed or likely planets, we then derive the occurrence rates of giant planets in different ranges of orbital periods. The overall occurrence rate of giant planets within 400 days is 4.6 +/- 0.6 %. We recover, for the first time in the Kepler data, the different populations of giant planets reported by radial velocity surveys. Comparing these rates with other yields, we find that the occurrence rate of giant planets is lower only for hot jupiters but not for the longer period planets. We also derive a first measurement on the occurrence rate of brown dwarfs in the brown-dwarf desert with a value of 0.29 +/- 0.17 %. Finally, we discuss the physical properties of the giant planets in our sample. We confirm that giant planets receiving a moderate irradiation are not inflated but we find that they are in average smaller than predicted by formation and evolution models. In this regime of low-irradiated giant planets, we find a possible correlation between their bulk density and the Iron abundance of the host star, which needs more detections to be confirmed.
  • Context: Effective temperature, surface gravity, and metallicity are basic spectroscopic stellar parameters necessary to characterize a star or a planetary system. Reliable atmospheric parameters for FGK stars have been obtained mostly from methods that relay on high resolution and high signal-to-noise optical spectroscopy. The advent of a new generation of high resolution near-IR spectrographs opens the possibility of using classic spectroscopic methods with high resolution and high signal-to-noise in the NIR spectral window. Aims: We aim to compile a new iron line list in the NIR from a solar spectrum to derive precise stellar atmospheric parameters, comparable to the ones already obtained from high resolution optical spectra. The spectral range covers 10 000 {\AA} to 25 000 {\AA}, which is equivalent to the Y, J, H, and K bands. Methods: Our spectroscopic analysis is based on the iron excitation and ionization balance done in LTE. We use a high resolution and high signal-to-noise ratio spectrum of the Sun from the Kitt Peak telescope as a starting point to compile the iron line list. The oscillator strengths (log gf) of the iron lines were calibrated for the Sun. The abundance analysis was done using the MOOG code after measuring equivalent widths of 357 solar iron lines. Results: We successfully derived stellar atmospheric parameters for the Sun. Furthermore, we analysed HD20010, a F8IV star, from which we derived stellar atmospheric parameters using the same line list as for the Sun. The spectrum was obtained from the CRIRES- POP database. The results are compatible with the ones found in the literature, confirming the reliability of our line list. However, due to the quality of the data we obtain large errors.
  • K2-19 is the second multi-planetary system discovered with K2 observations. The system is composed of two Neptune size planets close to the 3:2 mean-motion resonance. To better characterise the system we obtained two additional transit observations of K2-19b and five additional radial velocity observations. These were combined with K2 data and fitted simultaneously with the system dynamics (photo-dynamical model) which increases the precision of the transit time measurements. The higher transit time precision allows us to detect the chopping signal of the dynamic interaction of the planets that in turn permits to uniquely characterise the system. Although the reflex motion of the star was not detected, dynamic modelling of the system allowed us to derive planetary masses of $M_b= 44 \pm 12\, M_{\oplus}$ and $M_c = 15.9 \pm 7.0\, M_{\oplus}$ for the inner and the outer planets respectively, leading to densities close to Uranus. We also show that our method allows the derivation of mass ratios using only the 80 days of observations during the first campaign of K2.
  • The main goal of this work is to explore which elements carry the most information about the birth origin of stars and as such that are best suited for chemical tagging. We explored different techniques to minimize the effect of outlier value lines in the abundances by using Ni abundances derived for 1111 FGK type stars.We evaluated how the limited number of spectral lines can affect the final chemical abundance. Then we were able to make an efficient even footing comparison of the [X/Fe] scatter between the elements that have different number of observable spectral lines in the studied spectra. We found that the most efficient way of calculating the average abundance of elements when several spectral lines are available is to use a weighted mean (WM) where as a weight we considered the distance from the median abundance. This method can be effectively used without removing suspected outlier lines.We showed that when the same number of lines is used to determine chemical abundances, the [X/Fe] star-to-star scatter for iron group and $\alpha$-capture elements is almost the same. On top of this, but at a lower level the largest scatter was observed for Al and the smallest for Cr and Ni. We recommend caution when comparing [X/Fe] scatters among elements that have a different number of spectral lines available. A meaningful comparison is necessary to identify elements that show the largest intrinsic scatter and can be thus used for chemical tagging.
  • We performed a uniform and detailed abundance analysis of 12 refractory elements (Na, Mg, Al, Si, Ca, Ti, Cr, Ni, Co, Sc, Mn, and V) for a sample of 257 G- and K-type evolved stars from the CORALIE planet search program. To date, only one of these stars is known to harbor a planetary companion. We aimed to characterize this large sample of evolved stars in terms of chemical abundances and kinematics, thus setting a solid base for further analysis of planetary properties around giant stars. This sample, being homogeneously analyzed, can be used as a comparison sample for other planet-related studies, as well as for different type of studies related to stellar and Galaxy astrophysics. The abundances of the chemical elements were determined using an LTE abundance analysis relative to the Sun, with the spectral synthesis code MOOG and a grid of Kurucz ATLAS9 atmospheres. To separate the Galactic stellar populations both a purely kinematical approach and a chemical method were applied. We confirm the overabundance of Na in giant stars compared to the field FGK dwarfs. This enhancement might have a stellar evolutionary character, but departures from LTE may also produce a similar enhancement. Our chemical separation of stellar populations also suggests a "gap" in metallicity between the thick-disk and high-alpha metal-rich stars, as previously observed in dwarfs sample from HARPS. The present sample, as most of the giant star samples, also suffers from the B - V colour cut-off, which excludes low-log g stars with high metallicities, and high-logg star with low-[Fe/H]. For future studies of planet occurrence dependence on stellar metallicity around these evolved stars we suggest to use a sub-sample of stars in a "cut-rectangle" in the logg - [Fe/H] diagram to overcome the aforementioned issue.
  • Aims. In this work we derive new precise and homogeneous parameters for 37 stars with planets. For this purpose, we analyze high resolution spectra obtained by the NARVAL spectrograph for a sample composed of bright planet host stars in the northern hemisphere. The new parameters are included in the SWEET-Cat online catalogue. Methods. To ensure that the catalogue is homogeneous, we use our standard spectroscopic analysis procedure, ARES+MOOG, to derive effective temperatures, surface gravities, and metallicities. These spectroscopic stellar parameters are then used as input to compute the stellar mass and radius, which are fundamental for the derivation of the planetary mass and radius. Results. We show that the spectroscopic parameters, masses, and radii are generally in good agreement with the values available in online databases of exoplanets. There are some exceptions, especially for the evolved stars. These are analyzed in detail focusing on the effect of the stellar mass on the derived planetary mass. Conclusions. We conclude that the stellar mass estimations for giant stars should be managed with extreme caution when using them to compute the planetary masses. We report examples within this sample where the differences in planetary mass can be as high as 100% in the most extreme cases.
  • We find that hot jupiter host stars within the T$_\mathrm{eff}$ range 5900-6300K show lower Li abundances, by 0.14 dex, than stars without detected planets. This offset has a significance at the level 7$\sigma$, pointing to a stronger effect of planet formation on Li abundances when the planets are more massive and migrate close to the star. However, we also find that the average v \textit{sin}i of (a fraction of) stars with hot jupiters is higher on average than for single stars in the same T$_\mathrm{eff}$ region, suggesting that rotationally-induced mixing (and not the presence of planets) might be the cause for a greater depletion of Li. We confirm that the mass-metallicity dependence of the Li dip is extended towards [Fe/H] $\sim$ 0.4 dex (beginning at [Fe/H] $\sim$ -0.4 dex for our stars) and that probably reflects the mass-metallicity correlation of stars of the same T$_\mathrm{eff}$ on the Main Sequence. We find that for the youngest stars ($<$ 1.5 Gyr) around the Li dip, the depletion of Li increases with v \textit{sin}i values, as proposed by rotationally-induced depletion models. This suggests that the Li dip consists of fast rotators at young ages whereas the most Li-depleted old stars show lower rotation rates (probably caused by the spin-down during their long lifes). We have also explored the Li evolution with [Fe/H] taking advantage of the metal-rich stars included in our sample. We find that Li abundance reaches its maximum around solar metallicity but decreases in the most metal-rich stars, as predicted by some models of Li Galactic production.
  • Planetary studies demand precise and accurate stellar parameters as input to infer the planetary properties. Different methods often provide different results that could lead to biases in the planetary parameters. In this work, we present a refinement of the spectral synthesis technique designed to treat better more rapidly rotating FGK stars. This method is used to derive precise stellar parameters, namely effective temperature, surface gravity, metallicitity and rotational velocity. This procedure is tested for samples of low and moderate/fast rotating FGK stars. The spectroscopic analysis is based on the spectral synthesis package Spectroscopy Made Easy (SME), assuming Kurucz model atmospheres in LTE. The line list where the synthesis is conducted, is comprised of iron lines and the atomic data are derived after solar calibration. The comparison of our stellar parameters shows good agreement with literature values, both for low and for higher rotating stars. In addition, our results are on the same scale with the parameters derived from the iron ionization and excitation method presented in our previous works. We present new atmospheric parameters for 10 transiting planet-hosts as an update to the SWEET-Cat catalogue. We also re-analyse their transit light curves to derive new updated planetary properties.
  • It is still being debated whether the well-known metallicity - giant planet correlation for dwarf stars is also valid for giant stars. For this reason, having precise metallicities is very important. Different methods can provide different results that lead to discrepancies in the analysis of planet hosts. To study the impact of different analyses on the metallicity scale for evolved stars, we compare different iron line lists to use in the atmospheric parameter derivation of evolved stars. Therefore, we use a sample of 71 evolved stars with planets. With these new homogeneous parameters, we revisit the metallicity - giant planet connection for evolved stars. A spectroscopic analysis based on Kurucz models in local thermodynamic equilibrium (LTE) was performed through the MOOG code to derive the atmospheric parameters. Two different iron line list sets were used, one built for cool FGK stars in general, and the other for giant FGK stars. Masses were calculated through isochrone fitting, using the Padova models. Kolmogorov-Smirnov tests (K-S tests) were then performed on the metallicity distributions of various different samples of evolved stars and red giants. All parameters compare well using a line list set, designed specifically for cool and solar-like stars to provide more accurate temperatures. All parameters derived with this line list set are preferred and are thus adopted for future analysis. We find that evolved planet hosts are more metal-poor than dwarf stars with giant planets. However, a bias in giant stellar samples that are searched for planets is present. Because of a colour cut-off, metal-rich low-gravity stars are left out of the samples, making it hard to compare dwarf stars with giant stars. Furthermore, no metallicity enhancement is found for red giants with planets ($\log g < 3.0$\,dex) with respect to red giants without planets.
  • Due to the importance that the star-planet relation has to our understanding of the planet formation process, the precise determination of stellar parameters for the ever increasing number of discovered extra-solar planets is of great relevance. Furthermore, precise stellar parameters are needed to fully characterize the planet properties. It is thus important to continue the efforts to determine, in the most uniform way possible, the parameters for stars with planets as new discoveries are announced. In this paper we present new precise atmospheric parameters for a sample of 48 stars with planets. We then take the opportunity to present a new catalogue of stellar parameters for FGK and M stars with planets detected by radial velocity, transit, and astrometry programs. Stellar atmospheric parameters and masses for the 48 stars were derived assuming LTE and using high resolution and high signal-to-noise spectra. The methodology used is based on the measurement of equivalent widths for a list of iron lines and making use of iron ionization and excitation equilibrium principles. For the catalog, and whenever possible, we used parameters derived in previous works published by our team, using well defined methodologies for the derivation of stellar atmospheric parameters. This set of parameters amounts to over 65% of all planet host stars known, including more than 90% of all stars with planets discovered through radial velocity surveys. For the remaining targets, stellar parameters were collected from the literature.
  • The asteroseismic and planetary studies, like all research related to stars, need precise and accurate stellar atmospheric parameters as input. We aim at deriving the effective temperature (Teff), the surface gravity (log g), the metallicity ([Fe/H]), the projected rotational velocity (v sin i) and the MK type for 169 F, G, K, and M-type Kepler targets which were observed spectroscopically from the ground with five different instruments. We use two different spectroscopic methods to analyse 189 high-resolution, high-signal-to-noise spectra acquired for the 169 stars. For 67 stars, the spectroscopic atmospheric parameters are derived for the first time. KIC 9693187 and 11179629 are discovered to be double-lined spectroscopic binary systems. The results obtained for those stars for which independent determinations of the atmospheric parameters are available in the literature are used for a comparative analysis. As a result, we show that for solar-type stars the accuracy of present determinations of atmospheric parameters is +/- 150 K in Teff, +/- 0.15 dex in [Fe/H], and +/-? 0.3 dex in log g. Finally, we confirm that the curve-of-growth analysis and the method of spectral synthesis yield systematically different atmospheric parameters when they are applied to stars hotter than 6,000 K.
  • Temperature, surface gravity, and metallicitity are basic stellar atmospheric parameters necessary to characterize a star. We aim to improve the description of the spectroscopic temperatures especially for the cooler stars where the differences with the Infrared Flux Method are higher, as presented in previous work. Our spectroscopic analysis is based on the iron excitation and ionization balance, assuming Kurucz model atmospheres in LTE. The abundance analysis is determined using the code MOOG. We optimize the line list using a cool star with high resolution and high signal-to-noise spectrum, as a reference in order to check for weak, isolated lines. We test the quality of the new line list by re-deriving stellar parameters for 451 stars with high resolution and signal-to-noise HARPS spectra, that were analyzed in a previous work with a larger line list. The comparison in temperatures between this work and the latest IRFM shows that the differences for the cooler stars are significantly smaller and more homogeneously distributed than in previous studies for stars with temperatures below 5000 K. We use the new line list to re-derive parameters for some of the cooler stars that host planets. Finally, we present the impact of the new temperatures on the [Cr I/Cr II] and [Ti I/Ti II] abundance ratios that previously showed systematic trends with temperature.
  • Ultra-Luminous X-ray sources (ULX) are X-ray binaries with Lx>1E^39 ergs/s. The most spectacular examples of ULX occur in starburst galaxies and are now understood to be young, luminous High Mass X-ray Binaries. The conditions under which ULX form are poorly understood, but recent evidence suggests they may be more common in low metallicity systems. Here we investigate the hypothesis that ULX form preferentially in low metallicity galaxies by searching for ULX in a sample of Extremely Metal Poor Galaxies (XMPG) observed with the Chandra X-ray Observatory. XMPG are defined as galaxies with log(O/H)+12<7.65, or less than 5% solar. These are the most metal-deficient galaxies known, and a logical place to find ULX if they favor metal poor systems. We compare the number of ULX (corrected for background contamination) per unit of star formation (Nulx) in the XMPG sample with Nulx in a comparison sample of galaxies with higher metallicities taken from the Spitzer Infrared Galaxy Sample (SINGS). We find that ULX occur preferentially in the metal poor sample with a formal statistical significance of 2.3 sigma. We do not see strong evidence for a trend in the formation of ULX in the high metallicity sample: above 12+log(O/H) ~ 8.0 the efficiency of ULX production appears to be flat. The effect we see is strongest in the lowest metallicity bin. We discuss briefly the implications of these results for the formation of black holes in low metallicity gas.