• ### Consolidating Multiple FemtoSecond Lasers in Coupled Curved Plasma Capillaries(1805.00646)

May 2, 2018 physics.plasm-ph
Consolidating multiple high-energy femtosecond scale lasers is expected to enable implementation of cutting edge research areas varying from wakefield particle accelerators to ultra-high intensity laser pulses for basic fresearch. The ability to guide while augmenting a short-pulse laser is crucial in future laser based TeV particle accelerators where the laser energy depletion is the major setback. We propose, analyze and experimentally demonstrate consolidating multiple femtosecond pulse lasers in coupled curved capillaries. We demonstrate a proof of principle scheme of coupled curved capillaries where two femtosecond laser pulses are combined. We found that the details of the coupling region and injection scheme are crucial to the pulse consolidations. Furthermore, our simulations show that high-intensity short pulse laser can be guided in a small curvature radius capillary. Incorporating these finding in a curved capillary laser coupler will be a significant step towards realization of meters long TeV laser based particle accelerators.
• ### Evolution of the electric fields induced in high intensity laser-matter interactions(1803.04161)

March 12, 2018 physics.plasm-ph
Multi MeV protons \cite{snavely2000intense} and heavier ions are emitted by thin foils irradiated by high-intensity lasers, due to the huge accelerating fields, up to several teraelectronvolt per meter, at sub-picosecond timescale \cite{dubois2014target}. The evolution of these huge fields is not well understood till today. Here we report, for the first time, direct and temporally resolved measurements of the electric fields produced by the interaction of a short-pulse high-intensity laser with solid targets. The results, obtained with a sub-$100$ fs temporal diagnostics, show that such fields build-up in few hundreds of femtoseconds and lasts after several picoseconds.
• ### Recent studies on single-shot diagnostics for plasma accelerators at SPARC_LAB(1802.03253)

Plasma wakefield acceleration is the most promising acceleration technique for compact and cheap accelerators, thanks to the high accelerating gradients achievable. Nevertheless, this approach still suffers of shot-to-shot instabilities, mostly related to experimental parameters fluctuations. Therefore, the use of single shot diagnostics is needed to properly understand the acceleration mechanism. In this work, we present two diagnostics to probe electron beams from laser-plasma interactions, one relying on Electro Optical Sampling (EOS) for laser-solid matter interactions, the other one based on Optical Transition Radiation (OTR) for single shot measurements of the transverse emittance of plasma accelerated electron beams, both developed at the SPARC_LAB Test Facility.
• ### Overview of Plasma Lens Experiments and Recent Results at SPARC_LAB(1802.00279)

Feb. 1, 2018 physics.acc-ph
Beam injection and extraction from a plasma module is still one of the crucial aspects to solve in order to produce high quality electron beams with a plasma accelerator. Proper matching conditions require to focus the incoming high brightness beam down to few microns size and to capture a high divergent beam at the exit without loss of beam quality. Plasma-based lenses have proven to provide focusing gradients of the order of kT/m with radially symmetric focusing thus promising compact and affordable alternative to permanent magnets in the design of transport lines. In this paper an overview of recent experiments and future perspectives of plasma lenses is reported.
• ### Recent results at SPARC_LAB(1801.05990)

Jan. 18, 2018 physics.acc-ph
The current activity of the SPARC_LAB test-facility is focused on the realization of plasma-based acceleration experiments with the aim to provide accelerating field of the order of several GV/m while maintaining the overall quality (in terms of energy spread and emittance) of the accelerated electron bunch. In the following, the current status of such an activity is presented. We also show results related to the usability of plasmas as focusing lenses in view of a complete plasma-based focusing and accelerating system.
• ### Wake fields effects in dielectric capillary(1801.04200)

Jan. 12, 2018 physics.acc-ph
Plasma wake-field acceleration experiments are performed at the SPARC LAB test facility by using a gas-filled capillary plasma source composed of a dielectric capillary. The electron can reach GeV energy in a few centimeters, with an accelerating gradient orders of magnitude larger than provided by conventional techniques. In this acceleration scheme, wake fields produced by passing electron beams through dielectric structures can determine a strong beam instability that represents an important hurdle towards the capability to focus high-current electron beams in the transverse plane. For these reasons, the estimation of the transverse wakefield amplitudes assumes a fundamental role in the implementation of the plasma wake-field acceleration. In this work, it presented a study to investigate which parameters affect the wake-field formation inside a cylindrical dielectric structure, both the capillary dimensions and the beam parameters, and it is introduced a quantitative evaluation of the longitudinal and transverse electric fields.
• ### Nano-machining, surface analysis and emittance measurements of a copper photocathode at SPARC_LAB(1801.03823)

Jan. 11, 2018 physics.acc-ph
R\&D activity on Cu photocathodes is under development at the SPARC\_LAB test facility to fully characterize each stage of the photocathode "life" and to have a complete overview of the photoemission properties in high brightness photo-injectors. The nano(n)-machining process presented here consists in diamond milling, and blowing with dry nitrogen. This procedure reduces the roughness of the cathode surface and prevents surface contamination introduced by other techniques, such as polishing with diamond paste or the machining with oil. Both high roughness and surface contamination cause an increase of intrinsic emittance and consequently a reduction of the overall electron beam brightness. To quantify these effects, we have characterized the photocathode surface in terms of roughness measurement, and morphology and chemical composition analysis by means of Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), and Atomic Force Microscopy (AFM) techniques. The effects of n-machining on the electron beam quality have been also investigated through emittance measurements before and after the surface processing technique. Finally, we present preliminary emittance studies of yttrium thin film on Cu photocathodes.