-
The knowledge of atmospheric parameters -- such as temperature, pressure, and
humidity -- is very important for a proper reconstruction of air showers,
especially with the fluorescence technique. The Global Data Assimilation System
(GDAS) provides altitude-dependent profiles of these state variables of the
atmosphere and several more. Every three hours, a new data set on 23 constant
pressure level plus an additional surface values is available for the entire
globe. These GDAS data are now used in the standard air shower reconstruction
of the Pierre Auger Observatory. The validity of the data was verified by
comparisons with monthly models that were averaged from on-site meteorological
radio soundings and weather station measurements obtained at the Observatory in
Malarg\"ue. Comparisons of reconstructions using the GDAS data and the monthly
models are also presented. Since GDAS is a global model, the data can
potentially be used for other cosmic and gamma ray detectors. Several studies
were already performed or are underway for several locations worldwide. As an
example, a study performed in Colorado as part of an Atmospheric R&D for a
possible future cosmic ray observatory is presented.
-
Contributions of the Pierre Auger Collaboration to the 33rd International
Cosmic Ray Conference, Rio de Janeiro, Brazil, July 2013
-
Atmospheric conditions at the site of a cosmic ray observatory must be known
well for reconstructing observed extensive air showers, especially when
measured using the fluorescence technique. For the Pierre Auger Observatory, a
sophisticated network of atmospheric monitoring devices has been conceived.
Part of this monitoring was a weather balloon program to measure atmospheric
state variables above the Observatory. To use the data in reconstructions of
air showers, monthly models have been constructed. Scheduled balloon launches
were abandoned and replaced with launches triggered by high-energetic air
showers as part of a rapid monitoring system. Currently, the balloon launch
program is halted and atmospheric data from numerical weather prediction models
are used. A description of the balloon measurements, the monthly models as well
as the data from the numerical weather prediction are presented.
The knowledge of atmospheric parameters -- such as temperature, pressure, and humidity -- is very important for a proper reconstruction of air showers, especially with the fluorescence technique. The Global Data Assimilation System (GDAS) provides altitude-dependent profiles of these state variables of the atmosphere and several more. Every three hours, a new data set on 23 constant pressure level plus an additional surface values is available for the entire globe. These GDAS data are now used in the standard air shower reconstruction of the Pierre Auger Observatory. The validity of the data was verified by comparisons with monthly models that were averaged from on-site meteorological radio soundings and weather station measurements obtained at the Observatory in Malarg\"ue. Comparisons of reconstructions using the GDAS data and the monthly models are also presented. Since GDAS is a global model, the data can potentially be used for other cosmic and gamma ray detectors. Several studies were already performed or are underway for several locations worldwide. As an example, a study performed in Colorado as part of an Atmospheric R&D for a possible future cosmic ray observatory is presented.
Atmospheric conditions at the site of a cosmic ray observatory must be known well for reconstructing observed extensive air showers, especially when measured using the fluorescence technique. For the Pierre Auger Observatory, a sophisticated network of atmospheric monitoring devices has been conceived. Part of this monitoring was a weather balloon program to measure atmospheric state variables above the Observatory. To use the data in reconstructions of air showers, monthly models have been constructed. Scheduled balloon launches were abandoned and replaced with launches triggered by high-energetic air showers as part of a rapid monitoring system. Currently, the balloon launch program is halted and atmospheric data from numerical weather prediction models are used. A description of the balloon measurements, the monthly models as well as the data from the numerical weather prediction are presented.