We present a comparison of SCUBA-2 850-$\mu$m and Herschel 70--500-$\mu$m observations of the L1495 filament in the Taurus Molecular Cloud with the goal of characterising the SCUBA-2 Gould Belt Survey (GBS) data set. We identify and characterise starless cores in three data sets: SCUBA-2 850-$\mu$m, Herschel 250-$\mu$m, and Herschel 250-$\mu$m spatially filtered to mimic the SCUBA-2 data. SCUBA-2 detects only the highest-surface-brightness sources, principally detecting protostellar sources and starless cores embedded in filaments, while Herschel is sensitive to most of the cloud structure, including extended low-surface-brightness emission. Herschel detects considerably more sources than SCUBA-2 even after spatial filtering. We investigate which properties of a starless core detected by Herschel determine its detectability by SCUBA-2, and find that they are the core's temperature and column density (for given dust properties). For similar-temperature cores, such as those seen in L1495, the surface brightnesses of the cores are determined by their column densities, with the highest-column-density cores being detected by SCUBA-2. For roughly spherical geometries, column density corresponds to volume density, and so SCUBA-2 selects the densest cores from a population at a given temperature. This selection effect, which we quantify as a function of distance, makes SCUBA-2 ideal for identifying those cores in Herschel catalogues that are closest to forming stars. Our results can now be used by anyone wishing to use the SCUBA-2 GBS data set.

We investigate the multiplicity of extragalactic sources detected by the Herschel Space Observatory in the COSMOS field. Using 3.6- and 24-$\mu$m catalogues, in conjunction with 250-$\mu$m data from Herschel, we seek to determine if a significant fraction of Herschel sources are composed of multiple components emitting at 250 $\mu$m. We use the XID+ code, using Bayesian inference methods to produce probability distributions of the possible contributions to the observed 250-$\mu$m flux for each potential component. The fraction of Herschel flux assigned to the brightest component is highest for sources with total 250-$\mu$m fluxes < 45 mJy; however, the flux in the brightest component is still highest in the brightest Herschel sources. The faintest 250-$\mu$m sources (30-45 mJy) have the majority of their flux assigned to a single bright component; the second brightest component is typically significantly weaker, and contains the remainder of the 250-$\mu$m source flux. At the highest 250-$\mu$m fluxes (45-110 mJy), the brightest and second brightest components are assigned roughly equal fluxes, and together are insufficient to reach 100 per cent of the 250-$\mu$m source flux. This indicates that additional components are required, beyond the brightest two components, to reproduce the observed flux. 95 per cent of the sources in our sample have a second component that contains more than 10 per cent of the total source flux. Particularly for the brightest Herschel sources, assigning the total flux to a single source may overestimate the flux contributed by around 150 per cent.

The discovery of almost 2000 exoplanets has revealed an unexpectedly diverse planet population. Observations to date have shown that our Solar System is certainly not representative of the general population of planets in our Milky Way. The key science questions that urgently need addressing are therefore: What are exoplanets made of? Why are planets as they are? What causes the exceptional diversity observed as compared to the Solar System? EChO (Exoplanet Characterisation Observatory) has been designed as a dedicated survey mission for transit and eclipse spectroscopy capable of observing a large and diverse planet sample within its four-year mission lifetime. EChO can target the atmospheres of super-Earths, Neptune-like, and Jupiter-like planets, in the very hot to temperate zones (planet temperatures of 300K-3000K) of F to M-type host stars. Over the next ten years, several new ground- and space-based transit surveys will come on-line (e.g. NGTS, CHEOPS, TESS, PLATO), which will specifically focus on finding bright, nearby systems. The current rapid rate of discovery would allow the target list to be further optimised in the years prior to EChO's launch and enable the atmospheric characterisation of hundreds of planets. Placing the satellite at L2 provides a cold and stable thermal environment, as well as a large field of regard to allow efficient time-critical observation of targets randomly distributed over the sky. A 1m class telescope is sufficiently large to achieve the necessary spectro-photometric precision. The spectral coverage (0.5-11 micron, goal 16 micron) and SNR to be achieved by EChO, thanks to its high stability and dedicated design, would enable a very accurate measurement of the atmospheric composition and structure of hundreds of exoplanets.

The different algorithms appropriate for point source photometry on data from the SPIRE instrument on-board the Herschel Space Observatory, within the Herschel Interactive Processing Environment (HIPE) are compared. Point source photometry of a large ensemble of standard calibration stars and dark sky observations is carried out using the 4 major methods within HIPE: SUSSEXtractor, DAOphot, the SPIRE Timeline Fitter and simple Aperture Photometry. Colour corrections and effective beam areas as a function of the assumed source spectral index are also included to produce a large number of photometric measurements per individual target, in each of the 3 SPIRE bands (250, 350, 500um), to examine both the accuracy and repeatability of each of the 4 algorithms. It is concluded that for flux densities down to the level of 30mJy that the SPIRE Timeline Fitter is the method of choice. However, at least in the 250 and 350um bands, all 4 methods provide photometric repeatability better than a few percent down to at approximately 100mJy. The DAOphot method appears in many cases to have a systematic offset of ~8% in all SPIRE bands which may be indicative of a sub-optimal aperture correction. In general, aperture photometry is the least reliable method, i.e. largest scatter between observations, especially in the longest wavelength band. At the faintest fluxes, <30mJy, SUSSEXtractor or DAOphot provide a better alternative to the Timeline Fitter.

A laboratory prototype spectral/spatial interferometer has been constructed to demonstrate the feasibility of the double Fourier technique at Far Infrared (FIR) wavelengths (0.15 - 1 THz). It is planned to use this demonstrator to investigate and validate important design features and data processing methods for future astronomical FIR interferometer instruments. In building this prototype we have had to address several key technologies to provide an end-end system demonstration of this double Fourier interferometer. We report on the first results taken when viewing single slit and double slit sources at the focus of a large collimator used to simulate real sources at infinity. The performance of the prototype instrument for these specific field geometries is analyzed to compare with the observed interferometric fringes and to demonstrate image reconstruction capabilities.

A large sub-mm survey with Herschel will enable many exciting science opportunities, especially in an era of wide-field optical and radio surveys and high resolution cosmic microwave background experiments. The Herschel-SPIRE Legacy Survey (HSLS), will lead to imaging data over 4000 sq. degrees at 250, 350, and 500 micron. Major Goals of HSLS are: (a) produce a catalog of 2.5 to 3 million galaxies down to 26, 27 and 33 mJy (50% completeness; 5 sigma confusion noise) at 250, 350 and 500 micron, respectively, in the southern hemisphere (3000 sq. degrees) and in an equatorial strip (1000 sq. degrees), areas which have extensive multi-wavelength coverage and are easily accessible from ALMA. Two thirds of the of the sources are expected to be at z > 1, one third at z > 2 and about a 1000 at z > 5. (b) Remove point source confusion in secondary anisotropy studies with Planck and ground-based CMB data. (c) Find at least 1200 strongly lensed bright sub-mm sources leading to a 2% test of general relativity. (d) Identify 200 proto-cluster regions at z of 2 and perform an unbiased study of the environmental dependence of star formation. (e) Perform an unbiased survey for star formation and dust at high Galactic latitude and make a census of debris disks and dust around AGB stars and white dwarfs.

By providing sensitive sub-arcsecond images and integral field spectroscopy in the 25 - 400 micron wavelength range, a far-IR interferometer will revolutionize our understanding of planetary system formation, reveal otherwise-undetectable planets through the disk perturbations they induce, and spectroscopically probe the atmospheres of extrasolar giant planets in orbits typical of most of the planets in our solar system. The technical challenges associated with interferometry in the far-IR are greatly relaxed relative to those encountered at shorter wavelengths or when starlight nulling is required. A structurally connected far-IR interferometer with a maximum baseline length of 36 m can resolve the interesting spatial structures in nascent and developed exoplanetary systems and measure exozodiacal emission at a sensitivity level critical to TPF-I mission planning. The Space Infrared Interferometric Telescope was recommended in the Community Plan for Far-IR/Submillimeter Space Astronomy, studied as a Probe-class mission, and estimated to cost 800M dollars. The scientific communities in Europe, Japan, and Canada have also demonstrated a keen interest in far-IR interferometry through mission planning workshops and technology research, suggesting the possibility of an international collaborative effort.

We characterize the SWIRE galaxy populations in the SWIRE validation field within the Lockman Hole, based on the 3.6-24$\mu$ Spitzer data and deep U,g',r',r' optical imaging within an area ~1/3 sq. deg for ~16,000 Spitzer-SWIRE sources. The entire SWIRE survey will discover over 2.3 million galaxies at 3.6$\mu$m and almost 350,000 at 24$\mu$m; ~70,000 of these will be 5-band 3.6-24$\mu$ detections. The colors cover a broad range, generally well represented by redshifted spectral energy distributions of known galaxy populations, however significant samples of unusually blue objects in the [3.6-4.5]$\mu$m color are found, as well as many objects very red in the 3.6-24$\mu$m mid-IR. Nine of these are investigated and are interpreted as star-forming systems, starbursts and AGN from z=0.37 to 2.8, with luminosities from L$_{IR}$=10$^{10.3}$ to 10$^{13.7}$ L$_{\odot}$

The SIRTF Wide-area InfraRed Extragalactic survey (SWIRE), the largest SIRTF Legacy program, is a wide-area, imaging survey to trace the evolution of dusty, star-forming galaxies, evolved stellar populations, and AGN as a function of environment, from redshifts z~3 to the current epoch. SWIRE will survey 7 high-latitude fields, totaling 60 - 65 sq. deg. in all 7 SIRTF bands: IRAC 3.6, 4.5, 5.6, 8 microns and MIPS 24, 70, 160 microns. The Legacy Extragalactic Catalog may contain in excess of 2 million IR-selected galaxies, dominated by (1) ~150,000 luminous infrared galaxies (LIRGs: L{FIR}>10^11 L_sun), ~7000 of these with z>2; (2) 1 million early-type galaxies, ~10,000 with z>2; and (3) \~20,000 classical AGN, plus significantly more dust-obscured QSO/AGN among the LIRGs. SWIRE will provide an unprecedented view of the evolution of galaxies, structure, and AGN. The key scientific goals of SWIRE are: (1) to determine the evolution of actively star-forming and passively evolving galaxies in order to understand the history of galaxy formation in the context of cosmic structure formation; (2) to determine the evolution of the spatial distribution and clustering of evolved galaxies, starbursts and AGN in the key redshift range, 0.5<z<3, over which much of cosmic evolution has occurred; (3) to determine the evolutionary relationship between ``normal galaxies'' and AGN, and the contribution of AGN accretion energy vs stellar nucleosynthesis to the cosmic backgrounds. SWIRE's large area is important to create statistically significant population samples over enough volume cells that we can resolve the star formation history as a function of epoch and environment The large volume is also optimised for finding rare objects.