The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose neutrino experiment designed to measure the neutrino mass hierarchy using a central detector (CD), which contains 20 kton liquid scintillator (LS) surrounded by about 18,000 photomultiplier tubes (PMTs), located 700~m underground. The rate of cosmic muons reaching the JUNO detector is about 3~Hz and the muon induced neutrons and isotopes are major backgrounds for the neutrino detection. Reconstruction of the muon trajectory in the detector is crucial for the study and rejection of those backgrounds. This paper will introduce the muon tracking algorithm in the JUNO CD, with a least squares method of PMTs' first hit time (FHT). Correction of the FHT for each PMT was found to be important to reduce the reconstruction bias. The spatial resolution and angular resolution are better than 3~cm and 0.4~degree, respectively, and the tracking efficiency is greater than 90\% up to 16~m far from the detector center.

The Jiangmen Underground Neutrino Observatory(JUNO) is designed to determine neutrino mass hierarchy and precisely measure three of the neutrino oscillation parameters using reactor antineutrinos. It is also able to study many other physical phenomena, including supernova neutrinos, solar neutrinos, geo-neutrinos, atmosphere neutrinos, and so forth. The central detector of JUNO is a complex structure which contains 20,000~tons of liquid scintillator and about 18,000 20-inch photomultiplier tubes (PMTs). Currently, it is the largest liquid scintillator detector under construction. The expected energy resolution is going to reach about 3\%/$\sqrt{E(MeV)}$. To meet the requirements of the experiment, an algorithm of vertex reconstruction which takes advantage of time and charge information of PMTs has been developed by deploying maximum likelihood method. The key point to the success of the reconstruction algorithm is a good understanding of the complicated optical process in the liquid scintillator.

Einstein's equation could be interpreted as the first law of thermodynamic near the spherically symmetric horizon. Through recalling the Einstein gravity with a more general static spherical symmetric metric, we find that the entropy would have a correction in Einstein gravity. By using this method, we investigate the Eddington-inspired Born-Infeld (EiBI) gravity. Without matter field, we can also derive the first law in EiBI gravity. With an electromagnetic field, as the field equations have a more general spherically symmetric solution in EiBI gravity, we find that correction of the entropy could be generalized to EiBI gravity. Furthermore, we point out that the Einstein gravity and EiBI gravity might be equivalent on the event horizon. At last, under EiBI gravity with the electromagnetic field, a specific corrected entropy of black hole is given.

Conformal transformation as a mathematical tool has been used in many areas of gravitational physics. In this paper, we would consider the gravity's rainbow, in which the metric could be treated as a conformal rescaling of the original metric. By using the conformal transformation technique, we get a specific form of modified Newton's constant and cosmological constant in gravity's rainbow, which implies that the total vacuum energy is dependent on probe energy. Moreover, the result shows that the Einstein gravity's rainbow could be described by an energy-dependent $f(E,\tilde R)$ gravity. At last, we study the $f(R)$ gravity, when the gravity's rainbow is considered, it can also be described as another energy-dependent $\tilde f(E,\tilde R)$ gravity.

It is well-known that the non-strictly thermal character of the Hawking radiation spectrum generates a natural correspondence between Hawking radiation and black hole quasinormal modes. This main issue has been analyzed in the framework of Schwarzschild black holes, Kerr black holes and nonextremal Reissner-Nordstrom black holes. In this paper, by introducing the effective temperature, we reanalysis the non-strictly thermal character of large AdS black holes. The results show that the effective mass corresponding to the effective temperature is approximatively the average one in any dimension. And the other effective quantities can also be obtained. Based on the known forms of frequency in quasinormal modes, we reanalysis the asymptotic frequencies of the large AdS black hole in three and five dimensions. Then we get the formulas of the Bekenstein-Hawking entropy and the horizon's area quantization with functions of the quantum "overtone" number $n$.

The Jiangmen Underground Neutrino Observatory (JUNO) is a multipurpose neutrino-oscillation experiment, with a 20 kiloton liquid scintillator detector of unprecedented 3\% energy resolution (at 1 MeV) at 700-meter deep underground. There are ~18,000 20-inch photomultiplier tubes (PMTs) in the central detector with an optical coverage greater than 75%. Control of the systematics of the energy response is crucial to archive the designed energy resolution as well as to reach 1% precision of the absolute energy scale. The detected number of photoelectrons in each PMT differs by two orders of magnitude in the reactor antineutrino energy range in such a large detector, which is a challenge to the single channel charge measurement. JUNO has approved a new small-PMT system, including 25,000 3-inch PMTs, installed alternately with 20-inch PMTs. The individual 3-inch PMT receives mostly single photoelectrons, which provides a unique way to calibrate the energy response of the 20-inch PMT system by a photon-counting technology. Besides, the small-PMT system naturally extends the dynamic range of the energy measurement to help the high-energy physics, such as cosmic muons and atmospheric neutrinos. We will present the physics concept of this double calorimetry, the design and implementation of the 3-inch PMT and its readout electronics system.

In this paper, by proposing a generalized $specific~volume$, we restudy the $P-V$ criticality of charged AdS black holes in the extended phase space. The results show that most of the previous conclusions can be generalized without change, but the ratio $\tilde{\rho}_c$ should be $3 \tilde{\alpha}/16$ in general case. Further research on the thermodynamical phase transition of black hole leads us to a natural interpretation of our assumption, and more black hole properties can be generalized. Finally, we study the number density for charged AdS black hole in higher dimensions, the results show the necessity of our assumption.

The structures, point defects and impacts of fission products for U3Si (\b{eta}-U3Si and {\gamma}-U3Si) and USi2 ({\alpha}-USi2 and \b{eta}-USi2) are studied by first-principles calculations. The lattice parameters of U3Si and USi2 are calculated and the stability of different types of point defects is predicted by their formation energies. The results show that silicon vacancies are more prone to be produced than uranium vacancies in \b{eta}-USi2 matrix, while uranium vacancies are the most stable defects of other three types of crystallographic structures. The most favorable sites of fission products (strontium, barium, cerium and neodymium) are determined in this work as well. By calculating incorporation energies of fission products, we demonstrate that the uranium site is the most favored for all the fissions products. Comparing the structural changes influenced by different fission products, it is also found that the highest volume change is caused by barium interstitials. According to the current data, rare earth elements cerium and neodymium are found to be more stable than alkaline earth metals strontium and barium in a given nuclear matrix. Finally, it is also determined that in USi2 crystal lattice fission products tend to be stabilized in uranium substitution sites, while they are likely to form precipitates from the U3Si matrix. It is expected that this work may provide new insight into the mechanism for structural evolutions of silicide nuclear fuels in a reactor.

The experimental efforts characterizing the era of precision neutrino physics revolve around collecting high-statistics neutrino samples and attaining an excellent energy and position resolution. Next generation liquid-based neutrino detectors, such as JUNO, HyperKamiokande, etc, share the use of a large target mass, and the need of pushing light collection to the edge for maximal calorimetric information. Achieving high light collection implies considerable costs, especially when considering detector masses of several kt. A traditional strategy to maximize the effective photo-coverage with the minimum number of PMTs relies on Light Concentrators (LC), such as Winston Cones. In this paper, the authors introduce a novel concept called Occulting Light Concentrators (OLC), whereby a traditional LC gets tailored to a conventional PMT, by taking into account its single-photoelectron collection efficiency profile and thus occulting the worst performing portion of the photocathode. Thus, the OLC shape optimization takes into account not only the optical interface of the PMT, but also the maximization of the PMT detection performances. The light collection uniformity across the detector is another advantage of the OLC system. By considering the case of JUNO, we will show OLC capabilities in terms of light collection and energy resolution.

The discovery of the neutrino mixing angle $\theta_{13}$ opens new opportunities for the discovery of the leptonic CP violation for high intensity neutrino beams. MOMENT a future neutrino facility with a high-power proton beam of 15 MW from a continuous-wave linac is focused on that discovery. The high power of the proton beam causes extreme radiation conditions for the facility and especially for the target station where the pion capture system of five superconducting solenoids is located. In this paper initial studies are performed for the effects of the radiation on the solenoid structure and the area surrounding it. A concept cooling system is also proposed.

The purpose of this paper is to introduce a new way to inquire the quantum cosmology for a certain gravitational theory. Normally, the quantum cosmological model is introduced as the minisuperspace theory which is obtained by reducing the superspace where the Wheel-DeWitt equation is defined on using the symmetry provided by cosmological principle. Unlike that, the key of our approach is to reinterpret the cosmology in a classical dynamical way using a point-like Lagrangian and then quantize the point-like model. We apply the method into Einstein gravity, gravity with a cosmological constant and the $f(R)$-gravity, and get their wave equations respectively. By analsysing the exact solution for the quantum cosmology with and without a cosmological constant we demonstrate that the cosmological constant is essential and being a tiny positive number. We also show the possibility of explaining inflation under the quantum version of cosmology.

The Jiangmen Underground Neutrino Observatory (JUNO), a 20 kton multi-purpose underground liquid scintillator detector, was proposed with the determination of the neutrino mass hierarchy as a primary physics goal. It is also capable of observing neutrinos from terrestrial and extra-terrestrial sources, including supernova burst neutrinos, diffuse supernova neutrino background, geoneutrinos, atmospheric neutrinos, solar neutrinos, as well as exotic searches such as nucleon decays, dark matter, sterile neutrinos, etc. We present the physics motivations and the anticipated performance of the JUNO detector for various proposed measurements. By detecting reactor antineutrinos from two power plants at 53-km distance, JUNO will determine the neutrino mass hierarchy at a 3-4 sigma significance with six years of running. The measurement of antineutrino spectrum will also lead to the precise determination of three out of the six oscillation parameters to an accuracy of better than 1\%. Neutrino burst from a typical core-collapse supernova at 10 kpc would lead to ~5000 inverse-beta-decay events and ~2000 all-flavor neutrino-proton elastic scattering events in JUNO. Detection of DSNB would provide valuable information on the cosmic star-formation rate and the average core-collapsed neutrino energy spectrum. Geo-neutrinos can be detected in JUNO with a rate of ~400 events per year, significantly improving the statistics of existing geoneutrino samples. The JUNO detector is sensitive to several exotic searches, e.g. proton decay via the $p\to K^++\bar\nu$ decay channel. The JUNO detector will provide a unique facility to address many outstanding crucial questions in particle and astrophysics. It holds the great potential for further advancing our quest to understanding the fundamental properties of neutrinos, one of the building blocks of our Universe.

The Daya Bay Reactor Antineutrino Experiment reported the first observation of the non-zero neutrino mixing angle $\theta_{13}$ using the first 55 days of data. It has also provided the most precise measurement of $\theta_{13}$ with the extended data to 621 days. Daya Bay will keep running for another 3 years or so. There is about 100 TB raw data produced per year, as well as several copies of reconstruction data with similar volume to the raw data for each copy. The raw data is transferred to Daya Bay onsite and two offsite clusters: IHEP in Beijing and LBNL in California, with a short latency. There is quasi-real-time data processing at both onsite and offsite clusters, for the purpose of data quality monitoring, detector calibration and preliminary data analyses. The physics data production took place a couple of times per year according to the physics analysis plan. This paper will introduce the data movement and storage, data processing and monitoring, and the automation of the calibration.

The Jiangmen Underground Neutrino Observatory (JUNO) is a multipurpose neutrino-oscillation experiment designed to determine the neutrino mass hierarchy and to precisely measure oscillation parameters by detecting reactor antineutrinos, observe supernova neutrinos, study the atmospheric, solar neutrinos and geo-neutrinos, and perform exotic searches, with a 20 kiloton liquid scintillator detector of unprecedented $3\%$ energy resolution (at 1 MeV) at 700-meter deep underground and to have other rich scientific possibilities. Currently MC study shows a sensitivity of the mass hierarchy to be $\overline{\Delta\chi^2}\sim 11$ and $\overline{\Delta\chi^2}\sim 16$ in a relative and an absolute measurement, respectively. JUNO has been approved by Chinese Academy of Sciences in 2013, and an international collaboration was established in 2014. The civil construction is in preparation and the R$\&$D of the detectors are ongoing. A new offline software framework was developed for the detector simulation, the event reconstruction and the physics analysis. JUNO is planning to start taking data around 2020.

The Daya Bay Reactor Neutrino Experiment started running on September 23, 2011. The offline computing environment, consisting of 11 servers at Daya Bay, was built to process onsite data. With current computing ability, onsite data processing is running smoothly. The Performance Quality Monitoring system (PQM) has been developed to monitor the detector performance and data quality. Its main feature is the ability to efficiently process multi-data-stream from three experimental halls. The PQM processes raw data files from the Daya Bay data acquisition system, generates and publishes histograms via a graphical web interface by executing the user-defined algorithm modules, and saves the histograms for permanent storage. The fact that the whole process takes only around 40 minutes makes it valuable for the shift crew to monitor the running status of all the sub-detectors and the data quality.

Neutrino beam with about 300 MeV in energy, high-flux and medium baseline is considered a rational choice for measuring CP violation before the more powerful Neutrino Factory will be built. Following this concept, a unique neutrino beam facility based on muon-decayed neutrinos is proposed. The facility adopts a continuous-wave proton linac of 1.5 GeV and 10 mA as the proton driver, which can deliver an extremely high beam power of 15 MW. Instead of pion-decayed neutrinos, unprecedentedly intense muon-decayed neutrinos are used for better background discrimination. The schematic design for the facility is presented here, including the proton driver, the assembly of a mercury-jet target and capture superconducting solenoids, a pion/muon beam transport line, a long muon decay channel of about 600 m and the detector concept. The physics prospects and the technical challenges are also discussed.

The measurement of the neutrino mixing angle $\theta_{13}$ opens a gateway for the next generation experiments to measure the neutrino mass hierarchy and the leptonic CP-violating phase. Future reactor experiments will focus on mass hierarchy determination and the precision measurement of mixing parameters. Mass hierarchy can be determined from the disappearance of reactor electron antineutrinos based on the interference effect of two separated oscillation modes. Relative and absolute measurement techniques have been explored. A proposed experiment JUNO, with a 20 kton liquid scintillator detector of $3%/$$\sqrt{E(MeV)}$ energy resolution, $\sim$ 53 km far from reactors of $\sim$ 36 GW total thermal power, can reach to a sensitivity of $\Delta\chi^{2}>16$ considering the spread of reactor cores and uncertainties of the detector response. Three of mixing parameters are expected to be measured to better than 1% precision. There are multiple detector options for JUNO under investigation. The technical challenges are new type of PMTs with high efficiency and highly transparent liquid scintillator. Funding has been approved from Chinese Academy of Sciences. A similar proposal was from Korea known as RENO-50. Both of them are going to start data taking around 2020.

Integrating volatile renewable energy resources into the bulk power grid is challenging, due to the reliability requirement that at each instant the load and generation in the system remain balanced. In this study, we tackle this challenge for smart grid with integrated wind generation, by leveraging multi-timescale dispatch and scheduling. Specifically, we consider smart grids with two classes of energy users - traditional energy users and opportunistic energy users (e.g., smart meters or smart appliances), and investigate pricing and dispatch at two timescales, via day-ahead scheduling and realtime scheduling. In day-ahead scheduling, with the statistical information on wind generation and energy demands, we characterize the optimal procurement of the energy supply and the day-ahead retail price for the traditional energy users; in realtime scheduling, with the realization of wind generation and the load of traditional energy users, we optimize real-time prices to manage the opportunistic energy users so as to achieve systemwide reliability. More specifically, when the opportunistic users are non-persistent, i.e., a subset of them leave the power market when the real-time price is not acceptable, we obtain closedform solutions to the two-level scheduling problem. For the persistent case, we treat the scheduling problem as a multitimescale Markov decision process. We show that it can be recast, explicitly, as a classic Markov decision process with continuous state and action spaces, the solution to which can be found via standard techniques. We conclude that the proposed multi-scale dispatch and scheduling with real-time pricing can effectively address the volatility and uncertainty of wind generation and energy demand, and has the potential to improve the penetration of renewable energy into smart grids.