• We study the decentralized caching scheme in a two-layer network, which includes a sever, multiple helpers, and multiple users. Basically, the proposed caching scheme consists of two phases, i.e, placement phase and delivery phase. In the placement phase, each helper/user randomly and independently selects contents from the server and stores them into its memory. In the delivery phase, the users request contents from the server, and the server satisfies each user through a helper. Different from the existing caching scheme, the proposed caching scheme takes into account the pre-stored contents at both helpers and users in the placement phase to design the delivery phase. Meanwhile, the proposed caching scheme exploits index coding in the delivery phase and leverages multicast opportunities, even when different users request distinct contents. Besides, we analytically characterize the performance limit of the proposed caching scheme, and show that the achievable rate region of the proposed caching scheme lies within constant margins to the information-theoretic optimum. In particular, the multiplicative and additive factors are carefully sharpened to be $\frac{1}{48}$ and $4$ respectively, both of which are better than the state of arts. Finally, simulation results demonstrate the advantage of the proposed caching scheme compared with the state of arts.
  • Millimeter wave (mmWave) communication has attracted increasing attention as a promising technology for 5G networks. One of the key architectural features of mmWave is the use of massive antenna arrays at both the transmitter and the receiver sides. Therefore, by employing directional beamforming (BF), both mmWave base stations (MBSs) and mmWave users (MUEs) are capable of supporting multi-beam simultaneous transmissions. However, most researches have only considered a single beam, which means that they do not make full potential of mmWave. In this context, in order to improve the performance of short-range indoor mmWave networks with multiple reflections, we investigate the challenges and potential solutions of downlink multi-user multi-beam transmission, which can be described as a high-dimensional (i.e., beamspace) multi-user multiple-input multiple-output (MU-MIMO) technique, including multi-user BF training, simultaneous users' grouping, and multi-user multibeam power allocation. Furthermore, we present the theoretical and numerical results to demonstrate that beamspace MU-MIMO compared with single beam transmission can largely improve the rate performance of mmWave systems.
  • For millimeter-wave (mm-wave) buffer-aided tandem networks consisting of relay nodes and multiple channels per hop, we consider two traffic allocation schemes, namely local allocation and global allocation, and investigate the end-to-end latency of a file transfer. We formulate the problem for generic multi-hop queuing systems and subsequently derive closed-form expressions of the end-to-end latency. We quantify the advantages of the global allocation scheme relative to its local allocation counterpart, and we conduct an asymptotic analysis on the performance gain when the number of channels in each hop increases to infinity. The traffic allocations and the analytical delay performance are validated through simulations. Furthermore, taking a specific two-hop mm-wave network as an example, we derive lower bounds on the average end-to-end latency, where Nakagami-$m$ fading is considered. Numerical results demonstrate that, compared to the local allocation scheme, the advantage of global allocation grows as the number of relay nodes increases, at the expense of higher complexity that linearly increases with the number of relay nodes. It is also demonstrated that a proper deployment of relay nodes in a linear mm-wave network plays an important role in reducing the average end-to-end latency, and the average latency decays as the mm-wave channels become more deterministic. These findings provide insights for designing multi-hop mm-wave networks with low end-to-end latency.
  • In this paper, we establish the rigidity result for local holomorphic volume preserving maps from an irreducible Hermitian manifold of compact type into its Cartesian products.
  • This paper investigates two strategies to reduce the communication delay in future wireless networks: traffic dispersion and network densification. A hybrid scheme that combines these two strategies is also considered. The probabilistic delay and effective capacity are used to evaluate performance. For probabilistic delay, the violation probability of delay, i.e., the probability that the delay exceeds a given tolerance level, is characterized in terms of upper bounds, which are derived by applying stochastic network calculus theory. In addition, to characterize the maximum affordable arrival traffic for mmWave systems, the effective capacity, i.e., the service capability with a given quality-of-service (QoS) requirement, is studied. The derived bounds on the probabilistic delay and effective capacity are validated through simulations. These numerical results show that, for a given average system gain, traffic dispersion, network densification, and the hybrid scheme exhibit different potentials to reduce the end-to-end communication delay. For instance, traffic dispersion outperforms network densification, given high average system gain and arrival rate, while it could be the worst option, otherwise. Furthermore, it is revealed that, increasing the number of independent paths and/or relay density is always beneficial, while the performance gain is related to the arrival rate and average system gain, jointly. Therefore, a proper transmission scheme should be selected to optimize the delay performance, according to the given conditions on arrival traffic and system service capability.
  • Recently, it has been shown that the time-varying multiple-access channel (MAC) with perfect channel state information (CSI) at the receiver and delayed feedback CSI at the transmitters can be modeled as the finite state MAC (FS-MAC) with delayed state feedback, where the time variation of the channel is characterized by the statistics of the underlying state process. To study the fundamental limit of the secure transmission over multi-user wireless communication systems, we re-visit the FS-MAC with delayed state feedback by considering an external eavesdropper, which we call the finite state multiple-access wiretap channel (FS-MAC-WT) with delayed feedback. The main contribution of this paper is to show that taking full advantage of the delayed channel output feedback helps to increase the secrecy rate region of the FS-MAC-WT with delayed state feedback, and the results of this paper are further illustrated by a degraded Gaussian fading example.
  • Heterogeneous network (HetNet) is a key enabler to largely boost network coverage and capacity in the forthcoming fifth-generation (5G) and beyond. To support the explosively growing mobile data volumes, wireless communications with millimeter-wave (mm-wave) radios have attracted massive attention, which is widely considered as a promising candidate in 5G HetNets. In this article, we give an overview on the end-to-end latency of HetNets with mm-wave communications. In general, it is rather challenging for formulating and optimizing the delay problem with buffers in mm-wave communications, since conventional graph-based network optimization techniques are not applicable when queues are considered. Toward this end, we develop an adaptive low-latency strategy, which uses cooperative networking to reduce the end-to-end latency. Then, we evaluate the performance of the introduced strategy. Results reveal the importance of proper cooperative networking in reducing the end-to-end latency. In addition, we have identified several challenges in future research for low-latency mm-wave HetNets.
  • Mechanical resonators are promising systems for storing and manipulating information. To transfer information between mechanical modes, either direct coupling or an interface between these modes is needed. In previous works, strong coupling between different modes in a single mechanical resonator and direct interaction between neighboring mechanical resonators have been demonstrated. However, coupling between distant mechanical resonators, which is a crucial request for long-distance classical and quantum information processing using mechanical devices, remains an experimental challenge. Here, we report the experimental observation of strong indirect coupling between separated mechanical resonators in a graphene-based electromechanical system. The coupling is mediated by a far-off-resonant phonon cavity through virtual excitations via a Raman-like process. By controlling the resonant frequency of the phonon cavity, the indirect coupling can be tuned in a wide range. Our results may lead to the development of gate-controlled all-mechanical devices and open up the possibility of long-distance quantum mechanical experiments.
  • We first give an exposition on holomorphic isometries from the Poincar\'e disk to polydisks and from the Poincar\'e disk to the product of the Poincar\'e disk with a complex unit ball. As an application, we provide an example of proper holomorphic map from the unit disk to the complex unit ball that is irrational, algebraic and holomorphic on a neighborhood of the closed unit disk. We also include some new results on holomorphic isometries.
  • We experimentally demonstrate quantum coherent dynamics of a triple-dot-based multi-electron hybrid qubit. Pulsed experiments show that this system can be conveniently initialized, controlled, and measured electrically, and has good coherence time as compared to gate time. Furthermore, the current multi-electron hybrid qubit has an operation frequency that is tunable in a wide range, from 2 to about 15 GHz. We provide qualitative understandings of the experimental observations by mapping it onto a three-electron system, and compare it with the double dot hybrid qubit and the all-exchange triple-dot qubit.
  • Millimeter wave (mmWave) communications have recently attracted large research interest, since the huge available bandwidth can potentially lead to rates of multiple Gbps (gigabit per second) per user. Though mmWave can be readily used in stationary scenarios such as indoor hotspots or backhaul, it is challenging to use mmWave in mobile networks, where the transmitting/receiving nodes may be moving, channels may have a complicated structure, and the coordination among multiple nodes is difficult. To fully exploit the high potential rates of mmWave in mobile networks, lots of technical problems must be addressed. This paper presents a comprehensive survey of mmWave communications for future mobile networks (5G and beyond). We first summarize the recent channel measurement campaigns and modeling results. Then, we discuss in detail recent progresses in multiple input multiple output (MIMO) transceiver design for mmWave communications. After that, we provide an overview of the solution for multiple access and backhauling, followed by analysis of coverage and connectivity. Finally, the progresses in the standardization and deployment of mmWave for mobile networks are discussed.
  • Many physical systems, such as water/electricity distribution networks, are monitored by battery-powered Wireless Sensor Networks (WSNs). Since battery replacement of sensor nodes is generally difficult, long-term monitoring can be only achieved if the operation of the WSN nodes contributes to a long WSN lifetime. Two prominent techniques to long WSN lifetime are i) optimal sensor activation and ii) efficient data gathering and forwarding based on compressive sensing. These techniques are feasible only if the activated sensor nodes establish a connected communication network (connectivity constraint), and satisfy a compressive sensing decoding constraint (cardinality constraint). These two constraints make the problem of maximizing network lifetime via sensor node activation and compressive sensing NP-hard. To overcome this difficulty, an alternative approach that iteratively solves energy balancing problems is proposed. However, understanding whether maximizing network lifetime and energy balancing problems are aligned objectives is a fundamental open issue. The analysis reveals that the two optimization problems give different solutions, but the difference between the lifetime achieved by the energy balancing approach and the maximum lifetime is small when the initial energy at sensor nodes is significantly larger than the energy consumed for a single transmission. The lifetime achieved by the energy balancing is asymptotically optimal, and that the achievable network lifetime is at least $50$\% of the optimum. Analysis and numerical simulations quantify the efficiency of the proposed energy balancing approach.
  • We introduce the Hermitian-invariant group $\Gamma_f$ of a proper rational map $f$ between the unit ball in complex Euclidean space and a generalized ball in a space of typically higher dimension. We use properties of the groups to define the crucial new concepts of essential map and the source rank of a map. We prove that every finite subgroup of the source automorphism group is the Hermitian-invariant group of some rational proper map between balls. We prove that $\Gamma_f$ is non-compact if and only if $f$ is a totally geodesic embedding. We show that $\Gamma_f$ contains an $n$-torus if and only if $f$ is equivalent to a monomial map. We show that $\Gamma_f$ contains a maximal compact subgroup if and only if $f$ is equivalent to the juxtaposition of tensor powers. We also establish a monotonicity result; the group, after intersecting with the unitary group, does not decrease when a tensor product operation is applied to a polynomial proper map. We give a necessary condition for $\Gamma_f$ (when the target is a generalized ball) to contain automorphisms that move the origin.
  • Graphene-based electromechanical resonators have attracted much interest recently because of the outstanding mechanical and electrical properties of graphene and their various applications. However, the coupling between mechanical motion and charge transport has not been explored in graphene. Here, we studied the mechanical properties of a suspended 50-nm-wide graphene nanoribbon, which also acts as a single-electron transistor (SET) at low temperature. Using the SET as a sensitive detector, we found that the resonance frequency could be tuned from 82 MHz to 100 MHz and the quality factor exceeded 30000. The strong charge-mechanical coupling was demonstrated by observing the SET induced ~140 kHz resonance frequency shifts and mechanical damping. We also found that the SET can enhance the nonlinearity of the resonator. Our SET-coupled graphene mechanical resonator could approach an ultra-sensitive mass resolution of ~0.55*10^(-21) g and a force sensitivity of ~1.9*10^(-19) N/(Hz)^(1/2), and can be further improved. These properties indicate that our device is a good platform both for fundamental physical studies and potential applications.
  • Broadcasting/multicasting is an efficient mechanism for multimedia communications due to its high spectrum efficiency, which achieves point-to-multipoint transmission on the same radio resources. To satisfy the increasing demands for multimedia broadcast multicast service (MBMS), we present a power domain non-orthogonal MBMS transmission scheme in a K-tier heterogeneous network (HetNet). Firstly, the system model, usage scenarios, and fundamentals of the presented scheme are discussed. Next, a tractable framework is developed to analyse the performance of non-orthogonal MBMS transmission, by using stochastic geometry. Based on this framework, the analytical expressions for the signal-to-interference-plus-noise ratio (SINR) coverage probability, average number of served users, and sum rate are derived. Furthermore, synchronous non-orthogonal MBMS transmission to further improving the system performance is also studied. The results demonstrate that non-orthogonal MBMS transmission can achieve better performance than the conventional one, in which non-orthogonal multirate one can fully utilize channel conditions to achieve a significant rate gain, while non-orthogonal multi-service one can efficiently use power resources to guarantee the quality of service (QoS) of high priority users, and also provide services for low priority users simultaneously.
  • Recently, transition metal dichalcogenides (TMDCs) semiconductors have been utilized for investigating quantum phenomena because of their unique band structures and novel electronic properties. In a quantum dot (QD), electrons are confined in all lateral dimensions, offering the possibility for detailed investigation and controlled manipulation of individual quantum systems. Beyond the definition of graphene QDs by opening an energy gap in nanoconstrictions, with the presence of a bandgap, gate-defined QDs can be achieved on TMDCs semiconductors. In this paper, we review the confinement and transport of QDs in TMDCs nanostructures. The fabrication techniques for demonstrating two-dimensional (2D) materials nanostructures such as field-effect transistors and QDs, mainly based on e-beam lithography and transfer assembly techniques are discussed. Subsequently, we focus on transport through TMDCs nanostructures and QDs. With steady improvement in nanoscale materials characterization and using graphene as a springboard, 2D materials offer a platform that allows creation of heterostructure QDs integrated with a variety of crystals, each of which has entirely unique physical properties.
  • Phonon-cavity electromechanics allows the manipulation of mechanical oscillations similar to photon-cavity systems. Many advances on this subject have been achieved in various materials. In addition, the coherent phonon transfer (phonon Rabi oscillations) between the phonon cavity mode and another oscillation mode has attracted many interest in nano-science. Here we demonstrate coherent phonon transfer in a carbon nanotube phonon-cavity system with two mechanical modes exhibiting strong dynamical coupling. The gate-tunable phonon oscillation modes are manipulated and detected by extending the red-detuned pump idea of photonic cavity electromechanics. The first- and second-order coherent phonon transfers are observed with Rabi frequencies 591 kHz and 125 kHz, respectively. The frequency quality factor product fQ_m~2=10^12 Hz achieved here is larger thank k_B T_base/h, which may enable the future realization of Rabi oscillations in the quantum regime.
  • Carbon nanotubes (CNTs) have attracted much attention for use in nanomechanical devices because of their exceptional properties, such as large resonant frequencies, low mass, and high quality factors. Here, we report the first experimental realization of parametric strong coupling between two mechanical modes on a single CNT nanomechanical resonator, by applying an extra microwave pump. This parametric pump method can be used to couple mechanical modes with arbitrary frequency differences. The properties of the mechanical resonator are detected by single-electron tunneling at low temperature, which is found to be strongly coupled to both modes. The coupling strength between the two modes can be tuned by the pump power, setting the coupling regime from weak to strong. This tunability may be useful in further phonon manipulations in carbon nanotubes.
  • In this paper, we provide {\em effective} results on the non-embeddability of real-analytic hypersurfaces into a hyperquadric. We show that, for any $N >n \geq 1$, the defining functions $\varphi(z,\bar z,u)$ of all real-analytic hypersurfaces $M=\{v=\varphi(z,\bar z,u)\}\subset\mathbb C^{n+1}$ containing Levi-nondegenerate points and locally transversally holomorphically embeddable into some hyperquadric $\mathcal Q\subset\mathbb C^{N+1}$ satisfy an {\em universal} algebraic partial differential equation $D(\varphi)=0$, where the algebraic-differential operator $D=D(n,N)$ depends on $n, N$ only. To the best of our knowledge, this is the first effective result characterizing real-analytic hypersurfaces embeddable into a hyperquadric of higher dimension. As an application, we show that for every $n,N$ as above there exists $\mu=\mu(n,N)$ such that a Zariski generic real-analytic hypersurface $M\subset\mathbb C^{n+1}$ of degree $\geq \mu$ is not transversally holomorphically embeddable into any hyperquadric $\mathcal Q\subset\mathbb C^{N+1}$. We also provide an explicit upper bound for $\mu$ in terms of $n,N$. To the best of our knowledge, this gives the first effective lower bound for the CR-complexity of a Zariski generic real-algebraic hypersurface in complex space of a fixed degree.
  • High speed wireless access on 60 GHz spectrum relies on high-gain directional antennas to overcome the severe signal attenuation. However, perfect alignment between transmitting and receiving antenna beams is rare in practice and overheard signals from concurrent transmissions may cause significant interference. In this paper we analyze the impact of antenna beam misalignment on the system performance of 60 GHz wireless access. We quantify the signal power loss caused by beam misalignment and the interference power accumulated from neighboring concurrent transmissions whose signals are leaked either via the main-beam pointing in the similar direction or via side-lobe emission, and derive the probability distribution of the signal to interference plus noise power ratio (SINR). For scenarios where interfering transmitters are distributed uniformly at random, we derive upper and lower bounds on the cumulative distribution function (abbreviated as CDF or c.d.f.) of SINR, which can be easily applied to evaluate system performance. We validate our analytical results by simulations where random nodes are uniformly distributed within a circular hall, and evaluate the sensitivity of average throughput and outage probability against two parameters: the half-power (3 dB) beamwidth to main-lobe beamwidth ratio and the beam misalignment deviation to main-lobe beamwidth ratio. Our results indicate that the derived lower bound performs well when the half-power beamwidth to main-lobe beamwidth ratio or the number of concurrent transmission links is small. When the number of active links is high, it is desirable in antenna design to balance the degradation caused by beam misalignment (wider beam is better) and the interference from concurrent transmission (narrower beam is better).
  • The Coulomb interactions between electrons play important roles in coupling multiple qubits in various quantum systems. Here we demonstrate controlled quantum operations of three electron charge qubits based on three capacitively coupled semiconductor double quantum dots. The strong interactions between one double dot and other two double dots enable us to control the coherent rotations of one target qubit by the states of two control qubits.
  • Asymmetry in a three-electron double quantum dot (DQD) allows spin blockade, when spin-3/2 (quadruplet) states and spin-1/2 (doublet) states have different charge configurations. We have observed this DQD spin blockade near the (1,2)-(2,1) charge transition using a pulsed-gate technique and a charge sensor. We then use this spin blockade to detect Landau-Zener-St\"uckelberg (LZS) interference and coherent oscillations between the spin quadruplet and doublet states. Such studies add to our understandings of coherence and control properties of three-spin states in a double dot, which in turn would benefit the explorations into various qubit encoding schemes in semiconductor nanostructures.
  • The optimum off-line energy management scheme for multi-user multi-relay networks employing energy harvesting and wireless energy transfer is studied. Specifically, the users are capable of harvesting and transferring energy to each other over consecutive transmissions, though they have no fixed energy supplies. Meanwhile, network coding for the users' messages is conducted at the relays to enable cooperative transmission with source nodes in independent but not necessarily identically distributed (i.n.i.d.) Nakagami-$m$ fading channels. Therefore, a simultaneous two level cooperation, i.e., information-level and energy-level cooperation is conducted. The problem of energy efficiency (EE) maximization under constraints of the energy causality and a predefined outage probability threshold is formulated and shown to be non-convex. By exploiting fractional and geometric programming, a convex form-based iterative algorithm is developed to solve the problem efficiently. Close-to-optimal power allocation and energy cooperation policies across consecutive transmissions are found. Moreover, the effects of relay locations and wireless energy transmission efficiency are investigated and the performance comparison with the current state of solutions demonstrates that the proposed policies can manage the harvested energy more efficiently.
  • We study the complexity of holomorphic isometries and proper maps from the complex unit ball to type IV classical domains. We investigate on degree estimates of holomorphic isometries and holomorphic maps with minimum target dimension. We also construct a real-parameter family of mutually inequivalent holomorphic isometries from the unit ball to type IV domains. We also provide examples of non-isometric proper holomorphic maps from the complex unit ball to classical domains.
  • We provide regularity results for CR-maps between real hypersurfaces in complex spaces of different dimension with a Levi-degenerate target. We address both the real-analytic and the smooth case. Our results allow immediate applications to the study of proper holomorphic maps between Bounded Symmetric Domains.