• ### Active-sterile neutrino oscillations at INO-ICAL over a wide mass-squared range(1804.09613)

April 25, 2018 hep-ph, hep-ex, physics.ins-det
We perform for the first time a detailed search for active-sterile oscillations involving a light sterile neutrino, over a large $\Delta m^2_{41}$ range of $10^{-5}$ eV$^2$ to $10^2$ eV$^2$, using 10 years of atmospheric neutrino data expected from the proposed 50 kt magnetized ICAL detector at the INO. This detector can observe the atmospheric $\nu_{\mu}$ and $\bar\nu_{\mu}$ separately over a wide range of energies and baselines, making it sensitive to the magnitude and sign of $\Delta m^2_{41}$ over a large range. If there is no light sterile neutrino, ICAL can place competitive upper limit on $|U_{\mu 4}|^2 \lesssim 0.02$ at 90\% C.L. for $\Delta m^2_{41}$ in the range $(0.5 - 5) \times 10^{-3}$ eV$^2$. For the same $|\Delta m^2_{41}|$ range, ICAL would be able to determine its sign, exploiting the Earth's matter effect in $\mu^{-}$ and $\mu^{+}$ events separately if there is indeed a light sterile neutrino in Nature. This would help identify the neutrino mass ordering in the four-neutrino mixing scenario.
• ### UHECR primary identification using the lateral profile of muons in EAS(1707.09529)

New developments in detector technology allow for a realistic cost of large area surface detectors for cosmic ray air showers, with some limitations on particle identification, energy resolutions, directional information and dynamic range. In this paper, we present a simulation study using CORSIKA to quantify the lateral profile of the muons at ground level, characterized by their energy spectrum and lateral spread, and combine it with the depth at shower maximum (X$_{max}$) of an EAS initiated by a primary at energies $10^{16}$ eV - $10^{19}$ eV. Using different primaries, we show that the combined muon observables and X$_{max}$ can identify the primary in a large fraction of the events, depending on the energy and the detector performance. This study provides important input parameters for the design of a future muon detector for surface array, which will be able to boost the knowledge of primaries and of the QCD interactions in the atmosphere.
• The upcoming 50 kt magnetized iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) is designed to study the atmospheric neutrinos and antineutrinos separately over a wide range of energies and path lengths. The primary focus of this experiment is to explore the Earth matter effects by observing the energy and zenith angle dependence of the atmospheric neutrinos in the multi-GeV range. This study will be crucial to address some of the outstanding issues in neutrino oscillation physics, including the fundamental issue of neutrino mass hierarchy. In this document, we present the physics potential of the detector as obtained from realistic detector simulations. We describe the simulation framework, the neutrino interactions in the detector, and the expected response of the detector to particles traversing it. The ICAL detector can determine the energy and direction of the muons to a high precision, and in addition, its sensitivity to multi-GeV hadrons increases its physics reach substantially. Its charge identification capability, and hence its ability to distinguish neutrinos from antineutrinos, makes it an efficient detector for determining the neutrino mass hierarchy. In this report, we outline the analyses carried out for the determination of neutrino mass hierarchy and precision measurements of atmospheric neutrino mixing parameters at ICAL, and give the expected physics reach of the detector with 10 years of runtime. We also explore the potential of ICAL for probing new physics scenarios like CPT violation and the presence of magnetic monopoles.
• ### Design, development and performance study of six-gap glass MRPC detectors(1509.08586)

Dec. 15, 2016 hep-ex, nucl-ex, physics.ins-det
The Multigap Resistive Plate Chambers (MRPCs) are gas ionization detectors with multiple gas sub-gaps made of resistive electrodes. The high voltage (HV) is applied on the outer surfaces of outermost resistive plates only, while the interior plates are left electrically floating. The presence of multiple narrow sub--gaps with high electric field results in faster signals on the outer electrodes, thus improving the detector's time resolution. Due to their excellent performance and relatively low cost, the MRPC detector has found potential application in Time-of-Flight (TOF) systems. Here we present the design, fabrication, optimization of the operating parameters such as the HV, the gas mixture composition, and, performance of six--gap glass MRPC detectors of area 27cm $\times$ 27 cm, which are developed in order to find application as trigger detectors, in TOF measurement etc. The design has been optimized with unique spacers and blockers to ensure a proper gas flow through the narrow sub-gaps, which are 250 $\mu$m wide. The gas mixture consisting of R134A, Isobutane and SF$_{6}$, and the fraction of each constituting gases has been optimized after studying the MRPC performance for a set of different concentrations. The counting efficiency of the MRPC is about 95% at $17.9$ kV. At the same operating voltage, the time resolution, after correcting for the walk effect, is found to be about $219$ ps.
• ### Simulation studies of hadron energy resolution as a function of iron plate thickness at INO-ICAL(1401.2779)

March 11, 2015 hep-ex, physics.ins-det
We report on a detailed simulation study of the hadron energy resolution as a function of the thickness of the absorber plates for the proposed Iron Calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO). We compare the hadron resolutions obtained with absorber thicknesses in the range 1.5--8 cm for neutrino interactions in the energy range 2--15 GeV, which is relevant to hadron production in atmospheric neutrino interactions. We find that at lower energies, the thickness dependence of energy resolution is steeper than at higher energies, however there is a thickness-independent contribution that dominates at the lower thicknesses discussed in this work. As a result, the gain in hadron energy resolution with decreasing plate thickness is marginal. We present the results in the form of fits to a function with energy-dependent exponent.
• ### Enhancing sensitivity to neutrino parameters at INO combining muon and hadron information(1406.3689)

Jan. 4, 2015 hep-ph, hep-ex, physics.ins-det
The proposed ICAL experiment at INO aims to identify the neutrino mass hierarchy from observations of atmospheric neutrinos, and help improve the precision on the atmospheric neutrino mixing parameters. While the design of ICAL is primarily optimized to measure muon momentum, it is also capable of measuring the hadron energy in each event. Although the hadron energy is measured with relatively lower resolution, it nevertheless contains crucial information on the event, which may be extracted when taken concomitant with the muon data. We demonstrate that by adding the hadron energy information to the muon energy and muon direction in each event, the sensitivity of ICAL to the neutrino parameters can be improved significantly. Using the realistic detector response for ICAL, we present its enhanced reach for determining the neutrino mass hierarchy, the atmospheric mass squared difference and the mixing angle theta23, including its octant. In particular, we show that the analysis that uses hadron energy information can distinguish the normal and inverted mass hierarchies with Deltachi^2 approx 9 with 10 years exposure at the 50 kt ICAL, which corresponds to about 40% improvement over the muon-only analysis.
• ### Probing CP violation with the three years ultra-high energy neutrinos from IceCube(1312.6593)

Sept. 23, 2014 hep-ph, hep-ex, astro-ph.HE
The IceCube collaboration has recently announced the discovery of ultra-high energy neutrino events. These neutrinos can be used to probe their production source, as well as leptonic mixing parameters. In this work, we have used the first IceCube data to constrain the leptonic CP violating phase $\delta_{cp}$. For this, we have analyzed the data in the form of flux ratios. We find that the fit to $\delta_{cp}$ depends on the assumptions made on the production mechanism of these astrophyscial neutrinos. Consequently, we also use this data to impose constraints on the sources of the neutrinos.
• ### Hadron energy response of the Iron Calorimeter detector at the India-based Neutrino Observatory(1304.5115)

Oct. 30, 2013 hep-ex, physics.ins-det
The results of a Monte Carlo simulation study of the hadron energy response for the magnetized Iron CALorimeter detector, ICAL, proposed to be located at the India-based Neutrino Observatory (INO) is presented. Using a GEANT4 modeling of the detector ICAL, interactions of atmospheric neutrinos with target nuclei are simulated. The detector response to hadrons propagating through it is investigated using the hadron hit multiplicity in the active detector elements. The detector response to charged pions of fixed energy is studied first, followed by the average response to the hadrons produced in atmospheric neutrino interactions using events simulated with the NUANCE event generator. The shape of the hit distribution is observed to fit the Vavilov distribution, which reduces to a Gaussian at high energies. In terms of the parameters of this distribution, we present the hadron energy resolution as a function of hadron energy, and the calibration of hadron energy as a function of the hit multiplicity. The energy resolution for hadrons is found to be in the range 85% (for 1GeV) -- 36% (for 15 GeV).