-
The construction of a new detector is proposed to extend the capabilities of
ALICE in the high transverse momentum (pT) region. This Very High Momentum
Particle Identification Detector (VHMPID) performs charged hadron
identification on a track-by-track basis in the 5 GeV/c < p < 25 GeV/c momentum
range and provides ALICE with new opportunities to study parton-medium
interactions at LHC energies. The VHMPID covers up to 30% of the ALICE central
barrel and presents sufficient acceptance for triggered- and tagged-jet
studies, allowing for the first time identified charged hadron measurements in
jets. This Letter of Intent summarizes the physics motivations for such a
detector as well as its layout and integration into ALICE.
-
We have developed a cost effective technology for manufacturing various
layouts of micropattern gaseous detectors for a wide range of applications.
Such devices feature resistive electrodes interfaced to a network of thin
readout strips/electrodes. The following three examples of such innovative
designs and their applications will be presented: a prototype of a novel
double-phase LAr detector with a CsI photocathode immersed inside the LAr, a
CsI-RICH detector prototype for ALICE upgrade and GEM-like sensors for
environmental safety/security applications.
-
The ALICE Collaboration has measured inclusive J/psi production in pp
collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results
presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and
have been obtained by measuring the electron and muon pair decay channels,
respectively. The integrated luminosities for the two channels are L^e_int=1.1
nb^-1 and L^mu_int=19.9 nb^-1, and the corresponding signal statistics are
N_J/psi^e+e-=59 +/- 14 and N_J/psi^mu+mu-=1364 +/- 53. We present
dsigma_J/psi/dy for the two rapidity regions under study and, for the forward-y
range, d^2sigma_J/psi/dydp_t in the transverse momentum domain 0<p_t<8 GeV/c.
The results are compared with previously published results at sqrt(s)=7 TeV and
with theoretical calculations.
-
In the last few years our group have focused on developing various designs of
spark-protected micropattern gaseous detectors featuring resistive electrodes
instead of the traditional metallic ones: resistive microstrip counters,
resistive GEM, resistive MICROMEGAS. These detectors combine in one design the
best features of RPCs (spark-protection) and micropattern detectors (a high
position resolution). In this paper we report the progress so far made in
developing other types of resistive micropattern detectors: a
microdot-microhole detector and a microgap-microstrip detector. The former
detector is an optimal electron amplifier for some special designs of dual
phase noble liquid TPCs, for example with a CsI photocathode immersed inside
the noble liquid. Preliminary tests of such a detector, for the first time
built and investigated, are reported in this paper. The latter detector is
mainly orientated towards medical imaging applications such as X-ray scanners.
However, we believe that after a proper gas optimization, these detectors could
also achieve a high time resolution and could thus be used in applications as
TOF-PET, detection of charged particles with simultaneous high time and
position resolution etc.
-
A new family of spark-protected micropattern gaseous detectors is introduced:
a 2-D sensitive restive microstrip counter and hybrid detectors, which combine
in one design a resistive GEM with a microstrip detector. These novel detectors
have several important advantages over other conventional micropattern
detectors and are unique for applications like the readout detectors for dual
phase noble liquid TPCs and RICHs.
-
We have built a RICH detector prototype consisting of a liquid C6F14 radiator
and six triple Thick Gaseous Electron Multipliers (TGEMs), each of them having
an active area of 10x10 cm2. One triple TGEM has been placed behind the liquid
radiator in order to detect the beam particles, whereas the other five have
been positioned around the central one at a distance to collect the Cherenkov
photons. The upstream electrode of each of the TGEM stacks has been coated with
a 0.4 micron thick CsI layer.
In this paper, we will present the results from a series of laboratory tests
with this prototype carried out using UV light, 6 keV photons from 55Fe and
electrons from 90Sr as well as recent results of tests with a beam of charged
pions where for the first time Cherenkov Ring images have been successfully
recorded with TGEM photodetectors. The achieved results prove the feasibility
of building a large area Cherenkov detector consisting of a matrix of TGEMs.
-
This article presents the basic idea of VHMPID, an upgrade detector for the
ALICE experiment at LHC, CERN. The main goal of this detector is to extend the
particle identification capabilities of ALICE to give more insight into the
evolution of the hot and dense matter created in Pb-Pb collisions. Starting
from the physics motivations and working principles the challenges and current
status of development is detailed.
-
Advances in the technologies associated with position sensitive gaseous
detectors especially featuring CsI as reflective photoconverters will be
reviewed. These photodetectors represent the most effective solution for what
concerns cost and performance in the case of large area Cherenkov imaging
applications in relatively low rate (or low occupancy) high energy physics and
astrophysics experiments. Moreover, they are the only choice when the Cherenkov
detector is embedded in a magnetic field. Recently proposed single photon MPGDs
(Micropattern Gaseous Detectors) will be also discussed in view of the
successful efforts so far made to extend their sensitivity to visible light.
With some modifications, photosensitive gaseous detectors can also be used in
the imaging of X-rays and particles.
-
We describe a detector of alpha particles based on wire type counters
(single-wire and multiwire) operating in ambient air at high gas gains
(100-1000). The main advantages of these detectors are: low cost, robustness
and ability to operate in humid air. The minimum detectable activity achieved
with the multiwire detector for an integration time of 1 min is 140 Bq per m3,
which is comparable to that featured by commercial devices. Owing to such
features the detector is suited for massive application, for example for
continuous monitoring of Rn or Po contaminations or, as discussed in the paper,
its use in a network of Rn counters in areas affected by earth-quakes in order
to verify, on a solid statistical basis, the envisaged correlation between the
sudden Rn appearance and a forthcoming earthquake.
-
We describe the most recent efforts made by various groups in implementing
resistive electrodes in micropattern gaseous detectors with the aim to combine
in the same design the best features of RPCs (for the example, their robustness
and spark protection property) with the high granularity and thus the good
position resolution offered by microelectronic technology. In the stream of
this activity, we have recently developed two novel detectors with resistive
electrodes: one was based on resistive micromeshes and the second one is a MSGC
with resistive electrodes. We have demonstrated that the resistive meshes are a
convenient construction element for various designs of spark protective
detectors: RPCs type, GEM type and MICROMEGAS type. These new detectors enable
to considerably enhance the RPC and micropattern detectors applications since
they feature not only a high position resolution but also a relatively good
energy resolution (25-30 persent FWHM at 6 keV) and, if necessary, they can
operate in cascaded mode allowing the achievement of a high overall gas gain.
The main conclusion from these studies is that the implementation of resistive
electrodes in micropattern detectors makes them fully spark protected; on this
basis we consider this direction very promising.
-
In this paper we present a prototype of a Strip Resistive Thick GEM
photosensitive gaseous detector filled with Ne and ethylferrocene vapours at a
total pressure of 1 atm for an early forest fire detection system. Tests show
that it is one hundred times more sensitive than the best commercial
ultraviolet flame detectors and therefore, it is able to reliably detect a
flame of 1.5x1.5x1.5 m3 at a distance of about 1km. An additional and unique
feature of this detector is its imaging capability, which in combination with
other techniques, may significantly reduce false fire alarms when operating in
an automatic mode.
Preliminary results conducted with air filled photosensitive gaseous
detectors are also presented. The approach main advantages include both the
simplicity of manufacturing and affordability of construction materials such as
plastics and glues specifically reducing detector production cost. The
sensitivity of these air filled detectors at certain conditions may be as high
as those filled with Ne and EF. Long term test results of such sealed detectors
indicate a significant progress in this direction.
We believe that our detectors utilized in addition to other flame and smoke
sensors will exceptionally increase the sensitivity of forest fire detection
systems. Our future efforts will be focused on attempts to commercialize such
detectors utilizing our aforementioned findings.
-
We have developed and tested several new designs of GEM detectors with
micropattern electrodes manufactured by microelectronic technology. In one
design, the inner layer of the detector electrode consists of thin metallic
strips and the outer layer is made of a resistive grid manufactured by a screen
printing technology. In other designs, the electrodes were made of metallic
strips fed by HV via micro-resistors manufactured by a screen printing
technology. Due to these features, the new detectors have several important
advantages over conventional GEMs or ordinary thick GEMs. For example, the
resistive grid (in the first design) and the screen printed resistors (in other
designs) limited the current in case of discharges, making these detectors
intrinsically spark-protected.
We will here describe our tests with the photosensitive versions of these
detectors (coated with CsI layers) and the efforts of implementing them in
several applications. In particular, we will focus on our activity towards the
ALICE RICH detector upgrade and on tests of simplified prototypes of cryogenic
dark matter detectors.
-
An innovative photosensitive gaseous detector, consisting of a GEM like
amplification structure with double layered electrodes (instead of commonly
used metallic ones) coated with a CsI reflective photocathode, is described. In
one of our latest designs, the inner electrode consists of a metallic grid and
the outer one is made of resistive strips; the latter are manufactured by a
screen printing technology on the top of the metallic strips grid The inner
metallic grid is used for 2D position measurements whereas the resistive layer
provides an efficient spark protected operation at high gains - close to the
breakdown limit. Detectors with active areas of 10cm x10cm and 10cm x20cm were
tested under various conditions including the operation in photosensitive gas
mixtures containing ethylferrocene or TMAE vapors. The new technique could have
many applications requiring robust and reliable large area detectors for UV
visualization, as for example, in Cherenkov imaging devices.
-
We have recently developed an innovative detector of photons and charged
particles: a GEM-like gaseous amplification structure with resistive electrodes
instead of commonly used metallic ones. This novel detector combines the best
property of GEMs- the capability to operate in a cascaded mode and in poorly
quenched gases - and of RPC: the protection against sparks. In this paper will
shortly review our latest achievements in this direction, however the main
focus will be given on a new advanced design that allows to build large area
detectors manufactured by a screen printing technology. The proposed detector,
depending on the applications, can operate either in a GEM mode (electron
multiplications through holes only) or as a hybrid RPC with simultaneous
amplifications in the drift region and in the holes. The possible applications
of this new detector will be discussed.
-
We have developed prototypes of GEM-like detectors with resistive electrodes
to be used as RICH photodetectors equipped with CsI photocathodes. The main
advantages of these detectors are their intrinsic spark protection and
possibility to operate at high gain (~10E5) in many gases including poorly
quenched ones, allowing for the adoption of windowless configurations in which
the radiator gas is also used in the chamber. Results of systematic studies of
the resistive GEMs combined with CsI photocathodes are presented: its quantum
efficiency, rate characteristics, long-term stability, etc. On the basis of the
obtained results, we believe that the new detector will be a promising
candidate for upgrading the ALICE RICH detector
-
We have developed a new detector of photons and charged particles- a
hole-type structure with electrodes made of a double layered resistive
material: a thin low resistive layer coated with a layer having a much higher
resistivity. One of the unique features of this detector is its capability to
operate at high gas gains (up to 10E4) in air or in gas mixtures with air. They
can also operate in a cascaded mode or be combined with other detectors, for
example with GEM. This opens new avenues in their applications. Several
prototypes of these devices based on new detectors and oriented on practical
applications were developed and successfully tested: a detector of soft X-rays
and alpha particles, a flame sensor, a detector of dangerous gases. All of
these detectors could operate stably even in humid air and/or in dusty
conditions. The main advantages of these detectors are their simplicity, low
cost and high sensitivity. For example, due to the avalanche multiplication,
the detectors of flames and dangerous gases have a sensitivity of 10-100 times
higher than commercial devices. We therefore believe that new detectors will
have a great future.
-
The paper summarizes our latest progress in the development of newly
introduced micro pattern gaseous detectors with resistive electrodes. These
resistive electrodes protect the detector and the front-end electronics in case
of occasional discharges and thus make the detectors very robust and reliable
in operation. As an example, we describe in greater detail a new recently
developed GEM-like detector, fully spark-protected with electrodes made of
resistive kapton. We discovered that all resistive layers used in these studies
(including kapton), that are coated with photosensitive layers, such as CsI,
can be used as efficient photo cathodes for detectors operating in a pulse
counting mode. We describe the first applications of such detectors combined
with CsI or SbCs photo cathodes for the detection of UV photons at room and
cryogenic temperatures.
-
Recently, the last two modules (out of seven) of the ALICE High Momentum
Particle Identification detector (HMPID) were assembled and tested. The full
detector, after a pre-commissioning phase, has been installed in the
experimental area, inside the ALICE solenoid, at the end of September 2006. In
this paper we review the status of the ALICE/HMPID project and we present a
summary of the series production of the CsI photo-cathodes. We describe the key
features of the production procedure which ensures high quality photo-cathodes
as well as the results of the quality assessment performed by means of a
specially developed 2D scanner system able to produce a detailed map of the CsI
photo-current over the entire photo-cathode surface.
Finally we present our recent R&D efforts toward the development of a novel
generation of imaging Cherenkov detectors with the aim to identify, in heavy
ions collisions, hadrons up to 30 GeV/c.
-
We have demonstrated experimentally that recently developed gaseous detectors
combined with solid or gaseous photo-cathodes have exceptionally low noise and
high quantum efficiency for UV photons while being solar blind. For this reason
they can be used for the detection of weak UV sources in daylight conditions.
These detectors are extremely robust, can operate in poor gas conditions and
are cheap. We present the first results of their applications to
hyper-spectroscopy and flame detection in daylight conditions.
-
We have developed commercial prototypes of sealed gaseous detectors combined
with CsI photocathodes and/or filled with photosensitive vapors. The rirst
results of application of these devices for the detection of flames in daylight
conditions and for the detection of scintillation lights from noble liquids
will be presented. The main conclusion from our studies is that for some
applications the sealed UV sensitive gaseous detectors have superior
performance (higher practical quantum efficiency and better signal to noise
ratio) than existing commercial UV sensitive detectors. Additionally, they are
much cheaper.
-
The STAR-RICH detector extends the particle identification capapbilities of
the STAR experiment for charged hadrons at mid-rapidity. This detector
represents the first use of a proximity-focusing CsI-based RICH detector in a
collider experiment. It provides identification of pions and kaons up to 3
GeV/c and protons up to 5 GeV/c. The characteristics and performance of the
device in the inaugural RHIC run are described.