-
Muon beams of low emittance provide the basis for the intense,
well-characterised neutrino beams necessary to elucidate the physics of flavour
at a neutrino factory and to provide lepton-antilepton collisions at energies
of up to several TeV at a muon collider. The international Muon Ionization
Cooling Experiment (MICE) aims to demonstrate ionization cooling, the technique
by which it is proposed to reduce the phase-space volume occupied by the muon
beam at such facilities. In an ionization-cooling channel, the muon beam passes
through a material in which it loses energy. The energy lost is then replaced
using RF cavities. The combined effect of energy loss and re-acceleration is to
reduce the transverse emittance of the beam (transverse cooling). A major
revision of the scope of the project was carried out over the summer of 2014.
The revised experiment can deliver a demonstration of ionization cooling. The
design of the cooling demonstration experiment will be described together with
its predicted cooling performance.
-
The international Muon Ionization Cooling Experiment (MICE) will perform a
systematic investigation of ionization cooling with muon beams of momentum
between 140 and 240\,MeV/c at the Rutherford Appleton Laboratory ISIS facility.
The measurement of ionization cooling in MICE relies on the selection of a pure
sample of muons that traverse the experiment. To make this selection, the MICE
Muon Beam is designed to deliver a beam of muons with less than $\sim$1\%
contamination. To make the final muon selection, MICE employs a
particle-identification (PID) system upstream and downstream of the cooling
cell. The PID system includes time-of-flight hodoscopes, threshold-Cherenkov
counters and calorimetry. The upper limit for the pion contamination measured
in this paper is $f_\pi < 1.4\%$ at 90\% C.L., including systematic
uncertainties. Therefore, the MICE Muon Beam is able to meet the stringent
pion-contamination requirements of the study of ionization cooling.
-
The Muon Ionization Cooling Experiment (MICE) will perform a detailed study
of ionization cooling to evaluate the feasibility of the technique. To carry
out this program, MICE requires an efficient particle-identification (PID)
system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active
tracking-calorimeter that forms part of the PID system and tags muons that
traverse the cooling channel without decaying. The detector is capable of
identifying electrons with an efficiency of 98.6%, providing a purity for the
MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the
reconstruction of muon momenta in the range 100-280 MeV/$c$.
-
A novel single-particle technique to measure emittance has been developed and
used to characterise seventeen different muon beams for the Muon Ionisation
Cooling Experiment (MICE). The muon beams, whose mean momenta vary from 171 to
281 MeV/c, have emittances of approximately 1.5--2.3 \pi mm-rad horizontally
and 0.6--1.0 \pi mm-rad vertically, a horizontal dispersion of 90--190 mm and
momentum spreads of about 25 MeV/c. There is reasonable agreement between the
measured parameters of the beams and the results of simulations. The beams are
found to meet the requirements of MICE.
The international Muon Ionization Cooling Experiment (MICE) will perform a systematic investigation of ionization cooling with muon beams of momentum between 140 and 240\,MeV/c at the Rutherford Appleton Laboratory ISIS facility. The measurement of ionization cooling in MICE relies on the selection of a pure sample of muons that traverse the experiment. To make this selection, the MICE Muon Beam is designed to deliver a beam of muons with less than $\sim$1\% contamination. To make the final muon selection, MICE employs a particle-identification (PID) system upstream and downstream of the cooling cell. The PID system includes time-of-flight hodoscopes, threshold-Cherenkov counters and calorimetry. The upper limit for the pion contamination measured in this paper is $f_\pi < 1.4\%$ at 90\% C.L., including systematic uncertainties. Therefore, the MICE Muon Beam is able to meet the stringent pion-contamination requirements of the study of ionization cooling.
The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling channel without decaying. The detector is capable of identifying electrons with an efficiency of 98.6%, providing a purity for the MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the reconstruction of muon momenta in the range 100-280 MeV/$c$.
A novel single-particle technique to measure emittance has been developed and used to characterise seventeen different muon beams for the Muon Ionisation Cooling Experiment (MICE). The muon beams, whose mean momenta vary from 171 to 281 MeV/c, have emittances of approximately 1.5--2.3 \pi mm-rad horizontally and 0.6--1.0 \pi mm-rad vertically, a horizontal dispersion of 90--190 mm and momentum spreads of about 25 MeV/c. There is reasonable agreement between the measured parameters of the beams and the results of simulations. The beams are found to meet the requirements of MICE.