
This paper proposes a novel framework to reconstruct the dynamic magnetic
resonance images (DMRI) with motion compensation (MC). Due to the inherent
motion effects during DMRI acquisition, reconstruction of DMRI using motion
estimation/compensation (ME/MC) has been studied under a compressed sensing
(CS) scheme. In this paper, by embedding the intensitybased optical flow (OF)
constraint into the traditional CS scheme, we are able to couple the DMRI
reconstruction with motion field estimation. The formulated optimization
problem is solved by a primaldual algorithm with linesearch due to its
efficiency when dealing with nondifferentiable problems. With the estimated
motion field, the DMRI reconstruction is refined through MC. By employing the
multiscale coarsetofine strategy, we are able to update the
variables(temporal image sequences and motion vectors) and to refine the image
reconstruction alternately. Moreover, the proposed framework is capable of
handling a wide class of prior information (regularizations) for DMRI
reconstruction, such as sparsity, low rank and total variation. Experiments on
various DMRI data, ranging from in vivo lung to cardiac dataset, validate the
reconstruction quality improvement using the proposed scheme in comparison to
several stateoftheart algorithms.

Please refer to the Abstract part in the paper.

The topological invariants of a periodic system can be used to define the
topological phase of each band and determine the existence of topological
interface states within a certain bandgap. Here, we propose a scheme based on
the full phase diagrams, and design the topological interface states within any
specified bandgaps. As an example, here we propose a kind of onedimensional
phononic crystals. By connecting two semiinfinite structures with different
topological phases, the interface states within any specific bandgap or their
combinations can be achieved in a rational manner. The existence of interface
states in a single bandgap, in all odd bandgaps, in all even bandgaps, or in
all bandgaps, are verified in simulations and experiments. The scheme of full
phase diagrams we introduce here can be extended to other kinds of periodic
systems, such as photonic crystals and designer plasmonic crystals.

We report a new scenario of timeofflight (TOF) technique in which fast
neutrons and delayed gammaray signals were both recorded in a millisecond time
window in harsh environments induced by highintensity lasers. The delayed
gamma signals, arriving far later than the original fast neutron and often
being ignored previously, were identified to be the results of radiative
captures of thermalized neutrons. The linear correlation between gamma photon
number and the fast neutron yield shows that these delayed gamma events can be
employed for neutron diagnosis. This method can reduce the detecting efficiency
dropping problem caused by prompt highflux gamma radiation, and provides a new
way for neutron diagnosing in highintensity lasertarget interaction
experiments.

Volumetric sediment concentrations computed by phaseresolving swash
morphodynamic models are shown to exceed unity minus porosity (i.e. the maximal
physically possible concentration value) by up to factor of $10^5$ when using
standard expressions to compute the sediment transport rate. An ad hoc limit of
sediment concentration is introduced as a means to evaluate consequences of
exceeding physically realistic concentration by standard expressions. We find
that implementation of this ad hoc limit strongly changes the quantitative and
qualitative predictions of phaseresolving swash morphodynamic models,
suggesting that existing swash predictions are unreliable. This is because
standard expressions inappropriately consider or ignore the fact that the
shallow swash water depth limits the storage capacity of transported sediment.

The aim of this work is to design an explicit finite dimensional boundary
feedback controller for locally exponentially stabilizing the equilibrium
solutions to Fisher's equation in both $L^2(0,1)$ and $H^1(0,1)$. The feedback
controller is expressed in terms of the eigenfunctions corresponding to
unstable eigenvalues of the linearized equation. This stabilizing procedure is
applicable for any level of instability, which extends the result of \cite{02}
for nonlinear parabolic equations. The effectiveness of the approach is
illustrated by a numerical simulation.

Breaching of earthen or sandy dams/dunes by overtopping flow and waves is a
complicated process with strong, unsteady flow, high sediment transport, and
rapid bed changes in which the interactions between flow and morphology should
not be ignored. This study presents a depthaveraged twodimensional (2D)
coupled flow and sediment transport model to investigate the flow and breaching
processes with and without waves. Bed change and variable flow density are
included in the flow continuity and momentum equations to consider the impacts
of sediment transport. The model adopts the nonequilibrium approach for
totalload sediment transport and specifies different repose angles to handle
noncohesive embankment slope avalanching. The equations are solved using an
explicit finite volume method on a rectangular grid with the improved
Godunovtype central upwind scheme and the nonnegative reconstruction of the
water depth method to handle mixedregime flows near the breach. The model has
been tested against two sets of experimental data which show that it well
simulates the flow characteristics, bed changes, and sediment transport. It is
then applied to analyze flow and morphologic changes by overtopping flow with
and without waves. The simulated bed change and breach crosssection shape show
a significant difference if waves are considered. Erosion by flow without waves
mainly occurs at the breach and is dominated by vertical erosion at the initial
stage followed by the lateral erosion. With waves, the flow overtops the entire
length of the dune to cause faster erosion along the entire length. Erosion
mainly takes place at the upper layer at the initial stage and gradually
accelerates as the height of the dune reduces and flow discharge increases,
which indicates the simulated results with waves shall be further verified by
physical experimental evidence.

Wireless sensor networks have been a driving force of the Industrial Internet
of Things (IIoT) advancement in the process control and manufacturing industry.
The emergence of IIoT opens great potential for the ubiquitous field device
connectivity and manageability with an integrated and standardized architecture
from lowlevel device operations to highlevel datacentric application
interactions. This technological development requires software definability in
the key architectural elements of IIoT, including wireless field devices, IIoT
gateways, network infrastructure, and IIoT sensor cloud services. In this
paper, a novel softwaredefined IIoT (SDIIoT) is proposed in order to solve
essential challenges in a holistic IIoT system, such as reliability, security,
timeliness scalability, and quality of service (QoS). A new IIoT system
architecture is proposed based on the latest networking technologies such as
WirelessHART, WebSocket, IETF constrained application protocol (CoAP) and
softwaredefined networking (SDN). A new scheme based on CoAP and SDN is
proposed to solve the QoS issues. Computer experiments in a case study are
implemented to show the effectiveness of the proposed system architecture.

The threeequation model (TEM) was developed in the 1980s to model turbidity
currents (TCs) and has been widely used ever since. However, its physical
justification was questioned because selfaccelerating TCs simulated with the
steady TEM seemed to violate the turbulent kinetic energy balance. This
violation was considered as a result of very strong sediment erosion that
consumes more turbulent kinetic energy than is produced. To confine bed erosion
and thus remedy this issue, the fourequation model (FEM) was introduced by
assuming a proportionality between the bed shear stress and the turbulent
kinetic energy. Here we analytically proof that selfaccelerating TCs simulated
with the original steady TEM actually never violate the turbulent kinetic
energy balance, provided that the bed drag coefficient is not unrealistically
low. We find that stronger bed erosion, surprisingly, leads to more production
of turbulent kinetic energy due to conversion of potential energy of eroded
material into kinetic energy of the current. Furthermore, we analytically show
that, for asymptotically supercritical flow conditions, the original steady TEM
always produces selfaccelerating TCs if the upstream boundary conditions
("ignition" values) are chosen appropriately, while it never does so for
asymptotically subcritical flow conditions. We numerically show that our novel
method to obtain the ignition values even works for Richardson numbers very
near to unity. Our study also includes a comparison of the TEM and FEM closures
for the bed shear stress to simulation data of a coupled Large Eddy and
Discrete Element Model of sediment transport in water, which suggests that the
TEM closure might be more realistic than the FEM closure.

Existing numerical models of the swash zone are relatively inflexible in
dealing with sediment transport due to a high dependence of the deployed
numerical schemes on empirical sediment transport relations. Moreover, these
models are usually not wellbalanced, meaning they are unable to correctly
simulate quiescent flow. Here a wellbalanced and flexible morphological model
for the swash zone is presented. The nonlinear shallow water equations and the
Exner equation are discretized by the shockcapturing finite volume method, in
which the numerical flux and the bed slope source term are estimated by a
wellbalanced version of the SLIC (Slope LImited Centered) scheme that does not
depend on empirical sediment transport relations. The satisfaction of the
wellbalanced property is demonstrated through simulating quiescent coastal
flow. The quantitative accuracy of the model in reproducing key parameters
(i.e., the notional shoreline position, the swash depth, the flow velocity, the
overtopping flow volume, the beach change depth and the sediment transport
rate) is shown to be satisfactory through comparisons against analytical
solutions, experimental data as well as previous numerical solutions. This work
facilitates an improved modeling framework for the swash hydrodynamics and
sediment transport.